VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.4843 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge is a Go pin gauge with a diameter of 0.4843 inches and a tolerance of 0.00004 inches. It is made of uncoated steel and includes a Certificate of Accuracy with NIST…
SKU 3G-OTH-217113
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge is a Go pin gauge with a diameter of 0.4843 inches and a tolerance of 0.00004 inches. It is made of uncoated steel and includes a Certificate of Accuracy with NIST Traceability. This product is part of the Class X Go (Plus) Pin Gauges range for diameters 0.4061 in to 0.5100 in.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
A VERMONT GAGE Class X Go Pin Gauge is used to check the minimum acceptable hole size in precision manufacturing. It verifies that a hole is not smaller than the specified diameter, ensuring parts meet tight tolerances in aerospace, automotive, and medical device production.
What are the specifications of the VERMONT GAGE Class X Go Pin Gauge 141148430?
The VERMONT GAGE Class X Go Pin Gauge (MPN 141148430) has a diameter of 0.4843 inches, a tolerance of 0.00004 inches, and is made of uncoated steel. It includes a Certificate of Accuracy with NIST Traceability and is part of the Class X Go (Plus) range for diameters 0.4061 in to 0.5100 in.
Where to buy VERMONT GAGE pin gauges worldwide?
You can source VERMONT GAGE Class X Go Pin Gauges through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this precision inspection tool.
How to select the correct VERMONT GAGE Class X Go Pin Gauge?
Select a VERMONT GAGE Class X Go Pin Gauge by matching the nominal diameter to the hole's minimum size limit. For inch sizes, use the Go (Plus) gauge to check the low limit. Ensure the tolerance class (e.g., 0.00004 in for Class X) meets your application's requirements. Always verify NIST-traceable certification.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.4061 in to 0.5100 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
