VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.4858 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141148580) is a 0.4858-inch diameter, uncoated steel go pin gauge with a tolerance of 0.00004 inches. It is a Class X Go (Plus) gauge, supplied with a Certificate of…
SKU 3G-OTH-216971
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141148580) is a 0.4858-inch diameter, uncoated steel go pin gauge with a tolerance of 0.00004 inches. It is a Class X Go (Plus) gauge, supplied with a Certificate of Accuracy with NIST Traceability.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
A VERMONT GAGE Class X Go Pin Gauge is used to check the minimum acceptable diameter of a hole in precision machining and quality control. The 'Go' end must pass freely into the hole, confirming the hole is not undersized. It is essential for verifying tolerances in aerospace, automotive, and medical manufacturing.
What are the specifications of the VERMONT GAGE 141148580 pin gauge?
The VERMONT GAGE 141148580 is a Class X Go (Plus) pin gauge with a diameter of 0.4858 inches, a tolerance of 0.00004 inches, and is made of uncoated steel. It includes a Certificate of Accuracy with NIST Traceability, ensuring measurement traceability to national standards.
Where to buy VERMONT GAGE pin gauges worldwide?
3G Electric supplies VERMONT GAGE Class X Go Pin Gauges worldwide, handling full logistics, customs clearance, and delivery to your facility. As a global industrial solutions provider, we source genuine gauges like the 141148580 and support procurement teams with accurate quoting and technical guidance.
How to select the correct VERMONT GAGE Go pin gauge size?
To select the correct VERMONT GAGE Go pin gauge, determine the nominal hole diameter and tolerance class required for your application. For a Class X fit, choose a gauge with a tolerance of 0.00004 inches. Verify the gauge diameter matches the minimum hole size; the Go end must pass freely without force.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.4061 in to 0.5100 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
