VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.5184 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141151840) is a 0.5184-inch diameter, uncoated steel pin gauge with a tolerance of 0.00004 inches. It is supplied with a Certificate of Accuracy with NIST…
SKU 3G-OTH-263206
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141151840) is a 0.5184-inch diameter, uncoated steel pin gauge with a tolerance of 0.00004 inches. It is supplied with a Certificate of Accuracy with NIST Traceability, ensuring dimensional verification for go/no-go inspection of hole diameters within the 0.5101 in to 0.6350 in range.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
A VERMONT GAGE Class X Go Pin Gauge is used for go/no-go inspection of hole diameters. It verifies that a hole's minimum size is within tolerance, ensuring parts meet dimensional specifications in manufacturing and quality control applications.
What are the specifications of the VERMONT GAGE 141151840 pin gauge?
The VERMONT GAGE 141151840 is a Class X Go (Plus) pin gauge with a 0.5184-inch diameter, 0.00004-inch tolerance, and uncoated steel construction. It includes a Certificate of Accuracy with NIST Traceability for dimensional verification.
Where to buy VERMONT GAGE pin gauges worldwide?
You can source VERMONT GAGE pin gauges worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location, ensuring you receive the correct Class X Go pin gauge for your inspection needs.
How to select the correct VERMONT GAGE Class X pin gauge?
Select a VERMONT GAGE Class X pin gauge by matching the nominal diameter to your hole's minimum size. For go/no-go inspection, use a Go gauge sized at the low limit of the tolerance. Ensure the gauge's tolerance (e.g., 0.00004 in) meets your application requirements.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.5101 in to 0.6350 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
