VERMONT GAGE Class X Go Pin Gauge: Go (Plus), Inch, 0.5399 in Dia
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141153990) is a 0.5399-inch diameter, uncoated steel go pin gauge with a tolerance of 0.00004 inches. It is a Class X Go (Plus) pin gauge, supplied with a Certificate…
SKU 3G-OTH-263641
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VERMONT GAGE Class X Go (Plus) Pin Gauge (MPN 141153990) is a 0.5399-inch diameter, uncoated steel go pin gauge with a tolerance of 0.00004 inches. It is a Class X Go (Plus) pin gauge, supplied with a Certificate of Accuracy with NIST Traceability.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a VERMONT GAGE Class X Go Pin Gauge used for?
A VERMONT GAGE Class X Go Pin Gauge is used to check the minimum acceptable diameter of a hole in precision machining and quality control. The 0.5399-inch Go (Plus) gauge verifies that a hole is not undersized, ensuring parts meet tight tolerances in aerospace, automotive, and general manufacturing.
What are the specifications of the VERMONT GAGE 141153990 pin gauge?
The VERMONT GAGE 141153990 is a Class X Go (Plus) pin gauge with a diameter of 0.5399 inches, a tolerance of 0.00004 inches, and is made of uncoated steel. It includes a Certificate of Accuracy with NIST Traceability, confirming its calibration to national standards for reliable inspection.
Where to buy VERMONT GAGE pin gauges worldwide?
3G Electric supplies VERMONT GAGE Class X Go Pin Gauges worldwide, handling full logistics and customs clearance for international orders. As a global industrial sourcing partner, we provide the 141153990 and other precision gauges with NIST-traceable certification, ensuring you get the right tool for your application.
How to select the correct Go pin gauge for hole inspection?
To select the correct Go pin gauge, match the gauge diameter to the minimum hole size specified on your print. For a 0.5399-inch hole, use a VERMONT GAGE Class X Go (Plus) gauge with 0.00004-inch tolerance. Always verify the gauge is certified with NIST traceability to ensure accurate, repeatable measurements in your quality process.
Digunakan dalam
Aplikasi umum untuk VERMONT GAGEVERMONT GAGE Produk
3G Electric memasok VERMONT GAGE class x go (plus) pin gauges - dia. 0.5101 in to 0.6350 in. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
