VIEGA PROPRESS Crimp Fitting Cap: 3/4 in CTS Size, Press-fit
The VIEGA PROPRESS Crimp Fitting Cap (MPN 80360) is a 3/4 in CTS size press-fit cap with EPDM seal, designed for potable water stainless steel press fittings. 3G Electric interprets your demand for this genuine Viega…
SKU 3G-OTH-464941
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The VIEGA PROPRESS Crimp Fitting Cap (MPN 80360) is a 3/4 in CTS size press-fit cap with EPDM seal, designed for potable water stainless steel press fittings. 3G Electric interprets your demand for this genuine Viega component, sourcing it across our 14 industrial departments and supplying far more than listed, with specialist depth in combustion, pumps and controls as a trust anchor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the VIEGA PROPRESS Crimp Fitting Cap 80360 used for?
The VIEGA PROPRESS Crimp Fitting Cap 80360 is used to seal the end of a 3/4 in CTS stainless steel press-fit pipe in potable water systems. It provides a reliable, leak-proof closure using an EPDM seal, common in commercial and industrial plumbing applications.
What are the specifications of the VIEGA PROPRESS Crimp Fitting Cap 80360?
The VIEGA PROPRESS Crimp Fitting Cap 80360 is a press-fit cap with an EPDM seal, sized for 3/4 in CTS (Copper Tube Size) stainless steel pipe. It is manufactured by Viega under the PROPRESS line and is designed for potable water systems.
Where to buy the VIEGA PROPRESS Crimp Fitting Cap 80360 worldwide?
3G Electric supplies the genuine VIEGA PROPRESS Crimp Fitting Cap 80360 worldwide. We interpret your demand, source the component across our 14 industrial departments, and handle full logistics and customs clearance to deliver to your location.
How to install the VIEGA PROPRESS Crimp Fitting Cap 80360?
To install the VIEGA PROPRESS Crimp Fitting Cap 80360, ensure the pipe end is clean and deburred, then insert the cap fully onto the 3/4 in CTS pipe. Use a Viega-approved press tool to crimp the fitting, creating a permanent, leak-tight seal with the EPDM gasket.
Digunakan dalam
Aplikasi umum untuk VIEGA PROPRESSVIEGA PROPRESS Produk
3G Electric memasok VIEGA PROPRESS potable water stainless steel press fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
