Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
WALTER Diamond Indexable Turning Inserts
WALTERDiamond Indexable Turning Inserts

WALTER Diamond Indexable Turning Inserts

WALTER Diamond Turning Insert dengan kode CCGT3(2.5)1-FN2 WNN10 dan CCGT09T304-FN2 WNN10 adalah sisipan bubut indeksabel berlian yang dirancang untuk aplikasi pemesinan presisi tinggi. Dengan nomor bagian pabrikan…

SKU 3G-OTH-256137

Merek
WALTER
Item
Diamond Indexable Turning Inserts
Kategori
Diamond Indexable Turning Inserts
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

WALTER
Manufacturer Part Number
6955645

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

WALTER Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

WALTER Diamond Turning Insert dengan kode CCGT3(2.5)1-FN2 WNN10 dan CCGT09T304-FN2 WNN10 adalah sisipan bubut indeksabel berlian yang dirancang untuk aplikasi pemesinan presisi tinggi. Dengan nomor bagian pabrikan 6955645, produk ini menawarkan ketahanan aus dan kualitas permukaan akhir yang unggul untuk berbagai material. WALTER dikenal sebagai merek terkemuka dalam solusi perkakas pemotong industri.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi WALTER Diamond Turning Insert CCGT3(2.5)1-FN2 WNN10?

WALTER Diamond Turning Insert ini tersedia dalam dua varian: CCGT3(2.5)1-FN2 WNN10 dan CCGT09T304-FN2 WNN10. Keduanya adalah sisipan bubut indeksabel berlian dengan nomor bagian pabrikan 6955645. Produk ini dirancang untuk aplikasi pemesinan presisi tinggi dengan ketahanan aus yang optimal.

Untuk apa WALTER Diamond Turning Insert digunakan?

WALTER Diamond Turning Insert digunakan untuk operasi pembubutan presisi pada material keras seperti baja, stainless steel, dan paduan non-ferrous. Dengan desain indeksabel, sisipan ini memungkinkan penggantian cepat tanpa perlu mengatur ulang alat, meningkatkan efisiensi produksi di industri manufaktur.

Di mana beli WALTER Diamond Turning Insert di Indonesia?

Anda dapat membeli WALTER Diamond Turning Insert melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman tepat waktu ke lokasi industri Anda. Hubungi kami untuk minta penawaran.

Bagaimana cara memilih WALTER Diamond Turning Insert yang tepat?

Pilih varian CCGT3(2.5)1-FN2 WNN10 atau CCGT09T304-FN2 WNN10 berdasarkan kebutuhan geometri pemotongan Anda. Keduanya memiliki nomor bagian pabrikan 6955645 dan dirancang untuk aplikasi presisi. Pastikan material benda kerja dan kecepatan pemotongan sesuai dengan rekomendasi WALTER untuk hasil optimal.

Digunakan dalam

Aplikasi umum untuk WALTER
Automotive engine block machining — WALTER WNMG542-MM5 WSM20S turning inserts for cylinder bore finishing
Aerospace aluminum component turning — WALTER CCMT060208-FK6 WKK10S diamond inserts for high-speed finishing
General engineering cutoff operations — WALTER GX24-3E400N04-UA4 WKP33S parting inserts for steel bars
Mold and die steel grooving — WALTER GX16-2E300R6-CF5 WSM33S inserts for deep groove roughing
CNC lathe shallow hole drilling — WALTER A1148-1/16IN cobalt screw-machine drill bits for oil-hole drilling
Heavy equipment shaft turning — WALTER SCMT120408-RM4 square inserts for roughing of alloy steels

WALTER Produk

3G Electric memasok WALTER diamond indexable turning inserts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations on CNC lathes and machining centers. Available in designations CCGT3(2.5)0.5-FN2 WNN10 and CCGT09T302-FN2 WNN10
WALTER
Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations on CNC lathes and machining centers. Available in designations CCGT3(2.5)0.5-FN2 WNN10 and CCGT09T302-FN2 WNN10
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for finishing operations on aluminum, copper, and plastics. Available in CCGT3(2.5)2-FN2 WNN10 and CCGT09T308-FN2 WNN10 variants
WALTER
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for finishing operations on aluminum, copper, and plastics. Available in CCGT3(2.5)2-FN2 WNN10 and CCGT09T308-FN2 WNN10 variants
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive workpieces. Available in two configurations: CCGT3(2.5)0.2-FN2 WNN10 and CCGT09T301-FN2 WNN10. Suitable for finishing operations requiring tight tolerances and fine surface finish
WALTER
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive workpieces. Available in two configurations: CCGT3(2.5)0.2-FN2 WNN10 and CCGT09T301-FN2 WNN10. Suitable for finishing operations requiring tight tolerances and fine surface finish
Diamond indexable turning insert for precision finishing of non-ferrous materials, composites, and abrasive alloys. The FN2 geometry provides effective chip control. Suitable for general machining applications requiring fine surface finishes
WALTER
Diamond indexable turning insert for precision finishing of non-ferrous materials, composites, and abrasive alloys. The FN2 geometry provides effective chip control. Suitable for general machining applications requiring fine surface finishes
This diamond indexable turning insert is designed for precision turning and finishing operations on non-ferrous materials, composites, and hardened steels. It is commonly used in general machining applications where tight tolerances and fine surface finishes are required
WALTER
This diamond indexable turning insert is designed for precision turning and finishing operations on non-ferrous materials, composites, and hardened steels. It is commonly used in general machining applications where tight tolerances and fine surface finishes are required
Diamond indexable turning insert with CCGT geometry, 0.2 mm chipbreaker, and WNN10 diamond grade. Used for precision turning of non-ferrous materials on CNC lathes
WALTER
Diamond indexable turning insert with CCGT geometry, 0.2 mm chipbreaker, and WNN10 diamond grade. Used for precision turning of non-ferrous materials on CNC lathes

Lainnya dari WALTER

Lihat semua WALTER suku cadang →
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations. Available in designations CCGW2(1.5)2FS-1 and CCGW060208FS-1
WALTER
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations. Available in designations CCGW2(1.5)2FS-1 and CCGW060208FS-1
Diamond indexable turning insert available in DNMG332-MS3 and DNMG110408-MS3 geometries. Used for precision turning of non-ferrous materials, composites, and abrasive alloys in general machining applications
WALTER
Diamond indexable turning insert available in DNMG332-MS3 and DNMG110408-MS3 geometries. Used for precision turning of non-ferrous materials, composites, and abrasive alloys in general machining applications
This diamond indexable turning insert is available in two geometries: CCMT3(2.5)2-FM6 WSM20S and CCMT09T308-FM6 WSM20S. It is used for precision machining of non-ferrous materials, composites, and abrasive alloys. The FM6 geometry provides fine finishing with low cutting forces, suitable for applications requiring high surface quality and dimensional accuracy
WALTER
This diamond indexable turning insert is available in two geometries: CCMT3(2.5)2-FM6 WSM20S and CCMT09T308-FM6 WSM20S. It is used for precision machining of non-ferrous materials, composites, and abrasive alloys. The FM6 geometry provides fine finishing with low cutting forces, suitable for applications requiring high surface quality and dimensional accuracy
Diamond indexable turning insert for precision turning operations on non-ferrous materials, composites, and abrasive workpieces. Available in geometries DCGT3(2.5)1-FM2 and DCGT11T304-FM2, featuring chipbreaker configurations for fine finishing
WALTER
Diamond indexable turning insert for precision turning operations on non-ferrous materials, composites, and abrasive workpieces. Available in geometries DCGT3(2.5)1-FM2 and DCGT11T304-FM2, featuring chipbreaker configurations for fine finishing
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations. Available in two specification variants: DNMG442-RP5 WKK20S and DNMG150608-RP5 WKK20S
WALTER
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations. Available in two specification variants: DNMG442-RP5 WKK20S and DNMG150608-RP5 WKK20S
Diamond indexable turning insert for precision finishing and light machining of non-ferrous materials, composites, and hardened steels. Features WSM20S grade for high wear resistance and superior surface finish. Optimized geometry for low cutting forces and excellent chip control
WALTER
Diamond indexable turning insert for precision finishing and light machining of non-ferrous materials, composites, and hardened steels. Features WSM20S grade for high wear resistance and superior surface finish. Optimized geometry for low cutting forces and excellent chip control
Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive alloys. Available in VCMT331-RM4 and VCMT160404-RM4 geometries with RM4 chipbreaker, both in WSM30S grade. Suitable for turning operations requiring high wear resistance and surface finish
WALTER
Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive alloys. Available in VCMT331-RM4 and VCMT160404-RM4 geometries with RM4 chipbreaker, both in WSM30S grade. Suitable for turning operations requiring high wear resistance and surface finish
Diamond indexable turning insert for precision machining of hard, abrasive materials. Suitable for turning, facing, and profiling operations on ceramics, composites, and non-ferrous metals. Available in CNMG432-MS3 WSM20S and CNMG120408-MS3 WSM20S geometries
WALTER
Diamond indexable turning insert for precision machining of hard, abrasive materials. Suitable for turning, facing, and profiling operations on ceramics, composites, and non-ferrous metals. Available in CNMG432-MS3 WSM20S and CNMG120408-MS3 WSM20S geometries