Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
WALTER Diamond Indexable Turning Inserts DCMT3(2.5)1-PF WSM20S
WALTERDiamond Indexable Turning Inserts

WALTER Diamond Indexable Turning Inserts DCMT3(2.5)1-PF WSM20S

WALTER Diamond Turning Insert DCMT3(2.5)1-PF WSM20S dan DCMT11T304-PF WSM20S adalah sisipan bubut indeksabel berlian yang dirancang untuk aplikasi pembubutan presisi tinggi. Dengan nomor bagian pabrikan 7054101…

SKU 3G-OTH-260605

Merek
WALTER
Item
Diamond Indexable Turning Inserts DCMT3
Kategori
Diamond Indexable Turning Inserts
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

WALTER
Manufacturer Part Number
7054101

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

WALTER Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

WALTER Diamond Turning Insert DCMT3(2.5)1-PF WSM20S dan DCMT11T304-PF WSM20S adalah sisipan bubut indeksabel berlian yang dirancang untuk aplikasi pembubutan presisi tinggi. Dengan nomor bagian pabrikan 7054101, sisipan ini menggunakan geometri PF dan grade WSM20S untuk memberikan ketahanan aus dan kualitas permukaan yang unggul. Cocok untuk berbagai material, termasuk baja dan besi cor, sisipan ini ideal untuk operasi pembubutan finishing dan semi-finishing di industri permesinan Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi WALTER Diamond Turning Insert DCMT3(2.5)1-PF WSM20S?

Spesifikasi WALTER Diamond Turning Insert DCMT3(2.5)1-PF WSM20S mencakup geometri PF dan grade WSM20S. Nomor bagian pabrikan adalah 7054101. Sisipan ini dirancang untuk pembubutan presisi dengan ketahanan aus tinggi.

Untuk apa WALTER Diamond Turning Insert DCMT11T304-PF WSM20S digunakan?

WALTER Diamond Turning Insert DCMT11T304-PF WSM20S digunakan untuk operasi pembubutan finishing dan semi-finishing pada material seperti baja dan besi cor. Grade WSM20S memberikan ketahanan aus dan kualitas permukaan yang optimal.

Di mana beli WALTER Diamond Turning Insert di Indonesia?

Anda dapat membeli WALTER Diamond Turning Insert DCMT3(2.5)1-PF WSM20S dan DCMT11T304-PF WSM20S di Indonesia melalui 3G Electric. Kami adalah distributor resmi yang memasok dan mengirimkan peralatan industri ini langsung ke lokasi Anda, menangani logistik dan bea cukai.

Apa perbedaan antara DCMT3(2.5)1-PF WSM20S dan DCMT11T304-PF WSM20S?

Perbedaan utama terletak pada ukuran dan geometri. DCMT3(2.5)1-PF WSM20S memiliki ukuran lebih kecil, sedangkan DCMT11T304-PF WSM20S lebih besar. Keduanya menggunakan grade WSM20S dan geometri PF untuk aplikasi pembubutan presisi.

Bagaimana cara memilih WALTER Diamond Turning Insert yang tepat?

Pilih WALTER Diamond Turning Insert berdasarkan material yang akan dibubut dan jenis operasi. Untuk finishing, gunakan DCMT3(2.5)1-PF WSM20S atau DCMT11T304-PF WSM20S dengan grade WSM20S. Pastikan ukuran sisipan sesuai dengan holder yang digunakan.

Digunakan dalam

Aplikasi umum untuk WALTER
Automotive engine block machining — WALTER WNMG542-MM5 WSM20S turning inserts for cylinder bore finishing
Aerospace aluminum component turning — WALTER CCMT060208-FK6 WKK10S diamond inserts for high-speed finishing
General engineering cutoff operations — WALTER GX24-3E400N04-UA4 WKP33S parting inserts for steel bars
Mold and die steel grooving — WALTER GX16-2E300R6-CF5 WSM33S inserts for deep groove roughing
CNC lathe shallow hole drilling — WALTER A1148-1/16IN cobalt screw-machine drill bits for oil-hole drilling
Heavy equipment shaft turning — WALTER SCMT120408-RM4 square inserts for roughing of alloy steels

WALTER Produk

3G Electric memasok WALTER diamond indexable turning inserts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive workpieces. Available in two geometries: DCMT3(2.5)1-PF WSM30S and DCMT11T304-PF WSM30S. Designed for turning operations requiring fine surface finishes
WALTER
Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive workpieces. Available in two geometries: DCMT3(2.5)1-PF WSM30S and DCMT11T304-PF WSM30S. Designed for turning operations requiring fine surface finishes
Diamond indexable turning insert with DCMT geometry, PF chipbreaker, and WSM20S grade. Used for finishing and semi-finishing turning operations on non-ferrous materials, composites, and hardened steels
WALTER
Diamond indexable turning insert with DCMT geometry, PF chipbreaker, and WSM20S grade. Used for finishing and semi-finishing turning operations on non-ferrous materials, composites, and hardened steels
Diamond indexable turning inserts for precision turning and finishing of non-ferrous materials, composites, and abrasive workpieces. The diamond grade provides high wear resistance. Available in DCMT3(2.5)0.5-MM4 WSM20S and DCMT11T302-MM4 WSM20S variants
WALTER
Diamond indexable turning inserts for precision turning and finishing of non-ferrous materials, composites, and abrasive workpieces. The diamond grade provides high wear resistance. Available in DCMT3(2.5)0.5-MM4 WSM20S and DCMT11T302-MM4 WSM20S variants
This diamond indexable turning insert is available in two designations: DCMT3(2.5)0.5-MM4 WSM30S and DCMT11T302-MM4 WSM30S. It is used for turning, facing, and profiling operations on non-ferrous materials, composites, and abrasive alloys
WALTER
This diamond indexable turning insert is available in two designations: DCMT3(2.5)0.5-MM4 WSM30S and DCMT11T302-MM4 WSM30S. It is used for turning, facing, and profiling operations on non-ferrous materials, composites, and abrasive alloys
Diamond indexable turning inserts for precision machining of non-ferrous materials. The WSM20 grade and PF4 chipbreaker geometry provide sharp cutting edges and good surface finish in medium to fine turning operations
WALTER
Diamond indexable turning inserts for precision machining of non-ferrous materials. The WSM20 grade and PF4 chipbreaker geometry provide sharp cutting edges and good surface finish in medium to fine turning operations
Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive alloys. Available in geometries DCMT3(2.5)1-PM5 WSM20 and DCMT11T304-PM5 WSM20. Suitable for turning operations requiring high wear resistance and surface finish
WALTER
Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive alloys. Available in geometries DCMT3(2.5)1-PM5 WSM20 and DCMT11T304-PM5 WSM20. Suitable for turning operations requiring high wear resistance and surface finish

Lainnya dari WALTER

Lihat semua WALTER suku cadang →
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations. Available in designations CCGW2(1.5)2FS-1 and CCGW060208FS-1
WALTER
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations. Available in designations CCGW2(1.5)2FS-1 and CCGW060208FS-1
Diamond indexable turning insert available in DNMG332-MS3 and DNMG110408-MS3 geometries. Used for precision turning of non-ferrous materials, composites, and abrasive alloys in general machining applications
WALTER
Diamond indexable turning insert available in DNMG332-MS3 and DNMG110408-MS3 geometries. Used for precision turning of non-ferrous materials, composites, and abrasive alloys in general machining applications
This diamond indexable turning insert is available in two geometries: CCMT3(2.5)2-FM6 WSM20S and CCMT09T308-FM6 WSM20S. It is used for precision machining of non-ferrous materials, composites, and abrasive alloys. The FM6 geometry provides fine finishing with low cutting forces, suitable for applications requiring high surface quality and dimensional accuracy
WALTER
This diamond indexable turning insert is available in two geometries: CCMT3(2.5)2-FM6 WSM20S and CCMT09T308-FM6 WSM20S. It is used for precision machining of non-ferrous materials, composites, and abrasive alloys. The FM6 geometry provides fine finishing with low cutting forces, suitable for applications requiring high surface quality and dimensional accuracy
Diamond indexable turning insert for precision turning operations on non-ferrous materials, composites, and abrasive workpieces. Available in geometries DCGT3(2.5)1-FM2 and DCGT11T304-FM2, featuring chipbreaker configurations for fine finishing
WALTER
Diamond indexable turning insert for precision turning operations on non-ferrous materials, composites, and abrasive workpieces. Available in geometries DCGT3(2.5)1-FM2 and DCGT11T304-FM2, featuring chipbreaker configurations for fine finishing
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations. Available in two specification variants: DNMG442-RP5 WKK20S and DNMG150608-RP5 WKK20S
WALTER
Diamond indexable turning insert for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for turning, facing, and profiling operations. Available in two specification variants: DNMG442-RP5 WKK20S and DNMG150608-RP5 WKK20S
Diamond indexable turning insert for precision finishing and light machining of non-ferrous materials, composites, and hardened steels. Features WSM20S grade for high wear resistance and superior surface finish. Optimized geometry for low cutting forces and excellent chip control
WALTER
Diamond indexable turning insert for precision finishing and light machining of non-ferrous materials, composites, and hardened steels. Features WSM20S grade for high wear resistance and superior surface finish. Optimized geometry for low cutting forces and excellent chip control
Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive alloys. Available in VCMT331-RM4 and VCMT160404-RM4 geometries with RM4 chipbreaker, both in WSM30S grade. Suitable for turning operations requiring high wear resistance and surface finish
WALTER
Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive alloys. Available in VCMT331-RM4 and VCMT160404-RM4 geometries with RM4 chipbreaker, both in WSM30S grade. Suitable for turning operations requiring high wear resistance and surface finish
Diamond indexable turning insert for precision machining of hard, abrasive materials. Suitable for turning, facing, and profiling operations on ceramics, composites, and non-ferrous metals. Available in CNMG432-MS3 WSM20S and CNMG120408-MS3 WSM20S geometries
WALTER
Diamond indexable turning insert for precision machining of hard, abrasive materials. Suitable for turning, facing, and profiling operations on ceramics, composites, and non-ferrous metals. Available in CNMG432-MS3 WSM20S and CNMG120408-MS3 WSM20S geometries