WEATHERHEAD Compression Fitting Cap: 5/8 in OD Size, 7/8"-14 Thread Size, Compression
The WEATHERHEAD Compression Fitting Cap (MPN 7129X10) is a flareless bite-type steel compression fitting from the 7000 SERIES EMERTO, designed for 5/8 in OD tubing with a 7/8"-14 thread size. This carbon steel cap…
SKU 3G-OTH-470211
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WEATHERHEAD Compression Fitting Cap (MPN 7129X10) is a flareless bite-type steel compression fitting from the 7000 SERIES EMERTO, designed for 5/8 in OD tubing with a 7/8"-14 thread size. This carbon steel cap provides a secure seal in industrial fluid systems, backed by 3G Electric's specialist sourcing across 14 departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a WEATHERHEAD compression fitting cap used for?
A WEATHERHEAD compression fitting cap seals the end of a tubing run in industrial fluid systems. This 7000 SERIES EMERTO cap, with 5/8 in OD size and 7/8"-14 thread, provides a leak-proof closure in hydraulic, pneumatic, and lubrication circuits.
What are the specifications of the WEATHERHEAD 7129X10 compression cap?
The WEATHERHEAD 7129X10 is a flareless bite-type steel compression cap from the 7000 SERIES EMERTO. It fits 5/8 in OD tubing with a 7/8"-14 thread size, made of carbon steel. It is designed for secure sealing in high-pressure fluid systems.
Where to buy WEATHERHEAD compression fittings in worldwide?
3G Electric supplies WEATHERHEAD compression fittings worldwide. As a global industrial sourcing specialist, we handle logistics, customs clearance, and delivery to your site. Contact us for the 7129X10 cap or other WEATHERHEAD 7000 SERIES EMERTO components.
How to install a WEATHERHEAD flareless bite-type compression fitting?
Installation requires cutting tubing square, deburring, and sliding the nut and ferrule onto the tube. Insert the tube into the fitting body until it bottoms out, then tighten the nut to the manufacturer's recommended torque. Over-tightening can damage the bite-type seal.
Digunakan dalam
Aplikasi umum untuk WEATHERHEADWEATHERHEAD Produk
3G Electric memasok WEATHERHEAD flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
