WEATHERHEAD Compression Fitting Sleeve: 1 1/4 in OD Size
The WEATHERHEAD Compression Fitting Sleeve (MPN 7165AX20) is a flareless bite-type steel compression fitting in 1 1/4 in OD size, part of the 7000 Series Ermeto. It is rated for a maximum operating pressure of 2,100…
SKU 3G-OTH-469963
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WEATHERHEAD Compression Fitting Sleeve (MPN 7165AX20) is a flareless bite-type steel compression fitting in 1 1/4 in OD size, part of the 7000 Series Ermeto. It is rated for a maximum operating pressure of 2,100 psi. 3G Electric interprets your demand for this OEM component, sources it across our supply network, and supports your application with specialist expertise in fluid-power and industrial controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a WEATHERHEAD Compression Fitting Sleeve used for?
The WEATHERHEAD Compression Fitting Sleeve (MPN 7165AX20) is a flareless bite-type steel compression fitting used in hydraulic and fluid-power systems to create a leak-tight seal on tubing. It is commonly applied in industrial machinery, mobile equipment, and high-pressure lines where reliable connections are critical.
What are the specifications of the WEATHERHEAD 7165AX20?
The WEATHERHEAD 7165AX20 is a 7000 Series Ermeto flareless bite-type steel compression fitting sleeve with a 1 1/4 in OD size and a maximum operating pressure of 2,100 psi. It is designed for high-pressure hydraulic applications and is manufactured by WEATHERHEAD.
Where to buy WEATHERHEAD 7165AX20 worldwide?
3G Electric supplies the WEATHERHEAD 7165AX20 compression fitting sleeve worldwide. We interpret your demand, source the OEM component across our supply network, and handle full logistics and customs clearance to deliver to your location. Contact us for availability and lead time.
How to install a WEATHERHEAD flareless bite-type compression fitting?
To install a WEATHERHEAD flareless bite-type compression fitting, cut tubing square, deburr, and slide the sleeve and nut onto the tube. Insert the tube into the fitting body, tighten the nut to the specified torque to allow the sleeve to bite into the tube, then complete the final tightening. Always follow manufacturer instructions.
Digunakan dalam
Aplikasi umum untuk WEATHERHEADWEATHERHEAD Produk
3G Electric memasok WEATHERHEAD flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
