WEATHERHEAD Compression Fitting Adapter: 3/8 in OD x 3/8 in Pipe Size
The WEATHERHEAD Compression Fitting Adapter (MPN 7205X06X06) is a flareless bite-type steel compression fitting from the Ermeto Flareless series, connecting 3/8 in OD tubing to 3/8 in pipe size with a 9/16-18 x…
SKU 3G-OTH-469828
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WEATHERHEAD Compression Fitting Adapter (MPN 7205X06X06) is a flareless bite-type steel compression fitting from the Ermeto Flareless series, connecting 3/8 in OD tubing to 3/8 in pipe size with a 9/16-18 x 3/8-18 thread size. 3G Electric interprets this demand and sources the genuine WEATHERHEAD part, backed by specialist expertise across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a WEATHERHEAD Ermeto Flareless compression fitting adapter used for?
This WEATHERHEAD compression fitting adapter connects 3/8 in OD tubing to a 3/8 in pipe thread in hydraulic and pneumatic systems. It uses a flareless bite-type design for leak-free sealing on steel tubing, common in industrial fluid power applications.
What are the specifications of the WEATHERHEAD 7205X06X06 fitting?
The WEATHERHEAD 7205X06X06 is a flareless bite-type steel compression adapter from the Ermeto Flareless series. It has a 9/16-18 x 3/8-18 thread size, connecting 3/8 in OD tubing to 3/8 in pipe size. 3G Electric supplies this genuine WEATHERHEAD part.
Where to buy WEATHERHEAD compression fittings worldwide?
3G Electric sources and delivers genuine WEATHERHEAD compression fittings, including the Ermeto Flareless adapter 7205X06X06, to worldwide locations. We handle full logistics and customs clearance, ensuring the correct part reaches your facility.
How to install a WEATHERHEAD flareless bite-type compression fitting?
Installation requires cutting tubing square, deburring, and sliding the nut and ferrule onto the tube. Insert the tube into the fitting body until it bottoms out, then tighten the nut to the manufacturer's recommended torque. Over-tightening can damage the bite ring.
Digunakan dalam
Aplikasi umum untuk WEATHERHEADWEATHERHEAD Produk
3G Electric memasok WEATHERHEAD flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
