WEATHERHEAD Compression Fitting Union: 1 in OD x 1 in OD Size
The WEATHERHEAD Compression Fitting Union is a flareless bite-type steel compression fitting in the Ermeto Flareless series, sized 1 in OD x 1 in OD with a 1 5/16-12 x 1-5/16-12 thread size (MPN 7325X16X16). 3G…
SKU 3G-OTH-469756
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WEATHERHEAD Compression Fitting Union is a flareless bite-type steel compression fitting in the Ermeto Flareless series, sized 1 in OD x 1 in OD with a 1 5/16-12 x 1-5/16-12 thread size (MPN 7325X16X16). 3G Electric interprets this demand and sources the genuine OEM part, backed by specialist expertise in fluid-power components across our 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a WEATHERHEAD compression fitting union used for?
A WEATHERHEAD compression fitting union connects two tubes of the same outside diameter in a hydraulic or pneumatic system. The flareless bite-type design grips the tube without flaring, providing a leak-tight seal in high-pressure fluid-power applications across industrial machinery and mobile equipment.
What are the specifications of the WEATHERHEAD 7325X16X16 compression fitting?
The WEATHERHEAD 7325X16X16 is a flareless bite-type steel compression fitting union from the Ermeto Flareless series. It has a 1 in OD x 1 in OD tube size and a 1 5/16-12 x 1-5/16-12 thread size. The fitting is made of steel and is designed for high-pressure fluid systems.
Where to buy WEATHERHEAD compression fittings worldwide?
3G Electric supplies genuine WEATHERHEAD compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to source the WEATHERHEAD 7325X16X16 or any Ermeto Flareless series fitting for your application.
How to install a WEATHERHEAD flareless bite-type compression fitting?
To install a WEATHERHEAD flareless bite-type fitting, cut the tube square, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube into the fitting body until it bottoms out, then tighten the nut to the manufacturer's recommended torque. Over-tightening can damage the ferrule bite.
Digunakan dalam
Aplikasi umum untuk WEATHERHEADWEATHERHEAD Produk
3G Electric memasok WEATHERHEAD flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
