WEATHERHEAD Compression Tee Fitting: 1 in OD x 1 in OD x 1 in Pipe Size
The WEATHERHEAD Compression Tee Fitting is a flareless bite-type steel compression fitting from the 7000 Series Ermeto, designed for 1 in OD x 1 in OD x 1 in Pipe Size connections. It supports a maximum operating…
SKU 3G-OTH-469879
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WEATHERHEAD Compression Tee Fitting is a flareless bite-type steel compression fitting from the 7000 Series Ermeto, designed for 1 in OD x 1 in OD x 1 in Pipe Size connections. It supports a maximum operating pressure of 2,500 psi (MPN 7655X16X16X16).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a WEATHERHEAD Compression Tee Fitting used for?
The WEATHERHEAD Compression Tee Fitting is used to branch hydraulic or pneumatic lines in high-pressure systems. It connects three tubes of 1 in OD each, handling up to 2,500 psi. Common in industrial machinery, mobile equipment, and fluid power applications requiring leak-free flareless bite-type connections.
What are the specifications of the WEATHERHEAD 7655X16X16X16?
This WEATHERHEAD 7000 Series Ermeto compression tee fitting has a 1 in OD tube size on all three ports and a 1 in pipe size. It is a flareless bite-type steel fitting rated for a maximum operating pressure of 2,500 psi. The manufacturer part number is 7655X16X16X16.
Where to buy WEATHERHEAD compression fittings worldwide?
3G Electric supplies WEATHERHEAD compression fittings worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on the 7000 Series Ermeto tee fitting (MPN 7655X16X16X16) or other WEATHERHEAD products.
How to install a WEATHERHEAD flareless bite-type fitting?
Installation requires cutting the tube square, deburring, and sliding the nut and ferrule onto the tube. Insert the tube into the fitting body until it seats, then tighten the nut to the manufacturer’s recommended torque. Over-tightening can damage the bite ring. Always follow WEATHERHEAD’s published instructions for the 7000 Series.
Digunakan dalam
Aplikasi umum untuk WEATHERHEADWEATHERHEAD Produk
3G Electric memasok WEATHERHEAD flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
