WEATHERHEAD Compression Tee Fitting: 1/4 in OD x 1/4 in Pipe x 1/4 in OD Size
The WEATHERHEAD Compression Tee Fitting is a flareless bite-type steel compression fitting from the 7000 Series Ermeto, with a 1/4 in OD x 1/4 in Pipe x 1/4 in OD configuration and 1/4"-18 thread size (MPN…
SKU 3G-OTH-469788
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WEATHERHEAD Compression Tee Fitting is a flareless bite-type steel compression fitting from the 7000 Series Ermeto, with a 1/4 in OD x 1/4 in Pipe x 1/4 in OD configuration and 1/4"-18 thread size (MPN 7755X04X04X04).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a WEATHERHEAD Compression Tee Fitting used for?
The WEATHERHEAD Compression Tee Fitting is used to branch a fluid or gas line in industrial hydraulic and pneumatic systems. Its flareless bite-type design creates a leak-tight seal on tubing without flaring, making it suitable for high-pressure applications in plant machinery and process equipment.
What are the specifications of the WEATHERHEAD 7755X04X04X04?
This WEATHERHEAD 7000 Series Ermeto compression tee fitting has a 1/4 in OD x 1/4 in Pipe x 1/4 in OD configuration with a 1/4"-18 thread size. It is a flareless bite-type steel compression fitting, model MPN 7755X04X04X04, designed for reliable sealing on steel tubing.
Where to buy WEATHERHEAD compression fittings worldwide?
3G Electric supplies WEATHERHEAD compression fittings worldwide, handling full logistics and customs clearance for international orders. As a global industrial solutions provider, we source genuine WEATHERHEAD 7000 Series Ermeto fittings like the 7755X04X04X04 and deliver them to your facility, regardless of location.
How to install a WEATHERHEAD flareless bite-type fitting?
To install a WEATHERHEAD flareless bite-type fitting, insert the tube fully into the fitting until it bottoms out, then tighten the nut finger-tight. Mark the nut position, then tighten an additional 1 to 1.25 turns with a wrench to set the bite ring. Always follow the manufacturer's torque specifications for the 1/4"-18 thread size.
Digunakan dalam
Aplikasi umum untuk WEATHERHEADWEATHERHEAD Produk
3G Electric memasok WEATHERHEAD flareless bite-type steel compression fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
