WEGRigid Base 3-Phase IEC Metric General Purpose AC Motors

WEG 11018ET3Y280S/M-W22 150 hp Rigid Base 3-Phase IEC Metric

SKU 3G-OTH-57862

Juga terdaftar sebagai: 11018ET3Y280SMW22 · 11018ET3Y280S M W22 · 11018ET3Y280S-M-W22

Merek

WEG

Item

11018ET3Y280S/M-W22 150 hp Rigid Base 3-Phase IEC Metric

Part Number

11018ET3Y280S/M-W22

Kategori

Rigid Base 3-Phase IEC Metric General Purpose AC Motors

Tersedia untuk Dipesan

Stok tersedia & bea cukai ditangani

6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam

Harga dagang sesuai penawaran — balasan dalam 24 jam

Jumlah

WhatsApp seorang insinyur Message via Telegram

Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.

Buat akun gratis →Masuk

Pengiriman ke Seluruh Dunia

Pengiriman udara & laut

Lembar Data Atas Permintaan

Spesifikasi teknis

Penawaran 1 Hari

Balasan dalam 24 jam

Local availability & support — Indonesia

Phone: +65 8878 8355

Compliance & shipping

Hazardous material: Not classified as hazardous
California Prop 65 warning: No warning recorded
Licence required: No licence required
Safety Data Sheet: Not available
Special shipping: Required — additional freight charges may applyThis item requires special shipping, additional charges may apply.

Spesifikasi Teknis

WEG

Manufacturer Part Number

11018ET3Y280S/M-W22 

Type

Rigid Base Mount, Totally Enclosed Fan Cooled 

CAD

Click on image to zoom. 

Done

The motor's output power. It is normally listed as HP or Output Wattage on the motor's nameplate. 

UNSPSC

26101612

Weight

2,117 

Frequency

60

Frame Size

280S/M 

Mfr. Model

11018ET3Y280S/M-W22 

Shaft Length

140

Number of Speeds

1

Length Less Shaft

931

NEMA Design Class

N

Nominal Efficiency

95.8 

Konten Lembar Data

www.weg.net




Português                         2


English                         57


Español                        111


Deutsch                       167


Română                        223


Български                     277




                                             ENGLISH




            Manual of Electric Motors   57
www.weg.net




                     INSTALLATION, OPERATION AND MAINTENANCE
                     MANUAL OF ELECTRIC MOTORS
                     This manual provides information about WEG induction motors fitted with squirrel cage,
                     permanent magnet or hybrid rotors, low, medium and high voltage, in frame sizes IEC 56
                     to 630 and NEMA 42 to 9606/10.
                     The motor lines indicated below have additional information that can be checked in their
                     respective manuals:
                     g Smoke Extraction Motors;

                     g Electromagnetic Brake Motors;

                     g Hazardous Area Motors.


                     These motors meet the following standards, if applicable:
                     g NBR 17094-1: Máquinas Elétricas Girantes - Motores de Indução - Parte 1: trifásicos.

                     g NBR 17094-2: Máquinas Elétricas Girantes - Motores de Indução - Parte 2: monofásicos.

                     g IEC 60034-1: Rotating Electrical Machines - Part 1: Rating and Performance.

                     g NEMA MG 1: Motors and Generators.

                     g CSA C 22.2 N°100: Motors and Generators.

                     g UL 1004-1: Rotating Electrical Machines - General Requirements.




                     If you have any questions regarding this manual please contact your local WEG branch,
                     contact details can be found at www.weg.net.




58   Manual of Electric Motors
                                                                                                                                               www.weg.net

Table of Contents
1. Terminology                                                                                                                                           61


2. Initial Recommendations	                                                                                                                              62
2.1. Warning Symbol........................................................................................................................... 62
2.2. Receiving Inspection................................................................................................................. 62
2.3. Nameplates.................................................................................................................................... 63

3. Safety Instructions	                                                                                                                                  66


4. Handling and Transport	                                                                                                                               67
4.1. Lifting............................................................................................................................................... 67
     4.1.1. Horizontal motors with one eyebolt....................................................................................... 67
     4.1.2. Horizontal motor with two eyebolts....................................................................................... 68
     4.1.3. Vertical motors . ...................................................................................................................... 69
     4.1.3.1. Procedures to place W22 motors in the vertical position................................................ 69
     4.1.3.2. Procedures to place HGF motors in the vertical position............................................... 70
     4.2 Procedures to place W22 vertical mount motors in horizontal position.............................. 71

5. Storage	                                                                                                                                              73
5.1. Exposed machined Surfaces.................................................................................................. 73
5.2. Storage.......................................................................................................................................... 73




                                                                                                                                                                      ENGLISH
5.3 Bearings.......................................................................................................................................... 74
     5.3.1 Grease lubricated bearings..................................................................................................... 74
     5.3.2 Oil lubricated bearings............................................................................................................ 74
     5.3.3 Oil Mist lubricated bearings.................................................................................................... 75
     5.3.4 Sleeve bearing.......................................................................................................................... 75
5.4. INSULATION RESISTANCE.............................................................................................................. 75
     5.4.1. Insulation resistance measurement...................................................................................... 75

6. Installation	                                                                                                                                         78
6.1. Foundations................................................................................................................................... 79
6.2. MOTOR MOUNTING.......................................................................................................................... 81
     6.2.1. Foot mounted motors.............................................................................................................. 81
     6.2.2. Flange mounted motors......................................................................................................... 81
     6.2.3. Pad mounted motors.............................................................................................................. 82
6.3. Balancing....................................................................................................................................... 82
6.4. Couplings....................................................................................................................................... 82
     6.4.1. Direct coupling......................................................................................................................... 83
     6.4.2. Gearbox coupling.................................................................................................................... 83
     6.4.3. Pulley and belt coupling......................................................................................................... 83
     6.4.4. Coupling of sleeve bearing motors....................................................................................... 83
6.5. Leveling.......................................................................................................................................... 84




                                                                                                                        Manual of Electric Motors                59
          www.weg.net




          6.6. Alignment....................................................................................................................................... 84
          6.7. Connection of oil lubricated or oil mist lubricated motors............................... 85
          6.8. Connection of the cooling water system...................................................................... 85
          6.9. Electrical connection............................................................................................................ 85
          6.10. Connection of the thermal protection devices........................................................ 88
          6.11. Resistance Temperature Detectors (Pt-100)................................................................. 89
          6.12. Connection of the space heaters..................................................................................... 91
          6.13. Starting Methods..................................................................................................................... 92
          6.14. Motors driven by Frequency Inverter........................................................................... 93
               6.14.1. Use of dV/dt filter.................................................................................................................... 93
               6.14.1.1. Motor with enameled round wire....................................................................................... 93
               6.14.1.2. Motor with prewound coils................................................................................................ 93
               6.14.2. Bearing insulation................................................................................................................. 94
               6.14.3. Switching frequency.............................................................................................................. 94
               6.14.4. Mechanical speed limitation................................................................................................. 94

          7. Commissioning	                                                                                                                                   95
          7.1. Initial Start-up ............................................................................................................................ 95
          7.2. Operating conditions .............................................................................................................. 97
               7.2.1.Limits of vibration . .................................................................................................................. 98

          8. Maintenance	                                                                                                                                     99
          8.1. General Inspection.................................................................................................................... 99
          8.2. Lubrication.................................................................................................................................... 99
ENGLISH




               8.2.1. Grease lubricated rolling bearings...................................................................................... 100
               8.2.1.1. Motor without grease fitting.............................................................................................. 102
               8.2.1.2. Motor with grease fitting.................................................................................................... 102
               8.2.1.3. Compatibility of the Mobil Polyrex EM grease with other greases............................... 102
               8.2.2. Oil lubricated bearings......................................................................................................... 103
               8.2.3. Oil mist lubricated bearings................................................................................................. 103
               8.2.4. Sleeve…

Dokumen Teknis

(1)

Technical Data Sheet

Dokumen PDF

Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.

Bicaralah dengan seorang insinyur

Ajukan pertanyaan

WEG Produk

3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

WEG General Purpose Motor 150 hp adalah motor AC 3-phase IEC metrik dengan rigid base mount dan konstruksi Totally Enclosed Fan Cooled (TEFC) yang dirancang untuk aplikasi industri berat. Motor ini memiliki frame size 280S/M, kecepatan nameplate 1.750 RPM pada 60 Hz, tegangan 460V AC, dan full load amps 170.0 A. Dengan part number 11018ET3Y280S/M-W22, motor ini merupakan pilihan andal untuk penggerak peralatan industri seperti pompa, kompresor, dan konveyor di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi motor WEG 150 hp 280S/M?

Motor WEG General Purpose 150 hp ini memiliki frame size 280S/M, enclosure TEFC, kecepatan 1.750 RPM pada 60 Hz, tegangan 460V AC, dan full load amps 170.0 A. Tipe rigid base mount 3-phase IEC metric cocok untuk berbagai aplikasi industri.

Untuk apa motor WEG 150 hp digunakan?

Motor WEG 150 hp TEFC ini umum digunakan untuk menggerakkan pompa sentrifugal, kompresor udara, konveyor, fan, dan peralatan industri berat lainnya yang membutuhkan daya 150 hp pada kecepatan 1.750 RPM.

Di mana beli motor WEG 150 hp di Indonesia?

Anda dapat membeli motor WEG General Purpose 150 hp (part number 11018ET3Y280S/M-W22) melalui 3G Electric. Kami adalah distributor resmi yang memasok dan mengirimkan motor ini ke seluruh Indonesia, menangani logistik dan kepabeanan untuk memudahkan pengadaan Anda.

Apa perbedaan motor WEG TEFC dengan motor open drip proof?

Motor WEG TEFC (Totally Enclosed Fan Cooled) seperti tipe 150 hp ini memiliki rumah tertutup rapat yang melindungi komponen internal dari debu, kelembaban, dan kotoran, sehingga cocok untuk lingkungan industri yang keras. Motor open drip proof (ODP) memiliki ventilasi terbuka dan lebih cocok untuk area bersih dan kering.

Bagaimana cara memilih motor WEG 150 hp yang tepat?

Pastikan tegangan suplai Anda 460V AC 60 Hz, dan periksa full load amps 170.0 A untuk penentuan kabel dan pengaman. Pilih frame size 280S/M yang sesuai dengan mounting base Anda. Motor ini rigid base mount, jadi pastikan dudukan Anda kokoh. Untuk aplikasi khusus, konsultasikan dengan teknisi 3G Electric.

Digunakan dalam

Aplikasi umum untuk WEG

Water and wastewater treatment — WEG TEFC motors (e.g., 25 hp, 1,765 RPM) driving centrifugal pumps in lift stations

Oil and gas processing — WEG ODP motors (e.g., 150 hp, 3,570 RPM) powering compressors in refineries

Food and beverage manufacturing — WEG TEFC motors (e.g., 3 hp, 1,175 RPM) operating conveyor belts in washdown areas

HVAC systems — WEG ODP motors (e.g., 25 hp, 3,600 RPM) driving large centrifugal fans in commercial buildings

Material handling — WEG TEFC motors (e.g., 50 hp, 1,775 RPM) powering belt conveyors in distribution centers

Mining and aggregates — WEG TEFC motors (e.g., 1/3 hp, 1,765 RPM) used in small crusher feeders and screening equipment

Not sure this is the right part? Photo-identify it→

WEG Produk

3G Electric memasok WEG rigid base 3-phase iec metric general purpose ac motors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Jelajahi semua WEG produk →Hubungi insinyur kami →