WELL-X-TROL Bladder: Mfr No 183-11, Compatible Mfr No ST-448/WX-448
The WELL-X-TROL Bladder, manufacturer part number 183-11, is a replacement bladder designed for convertible well jet pumps. It is compatible with the WELL-X-TROL model WX-448. This bladder serves as a key component…
SKU 3G-OTH-99407
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WELL-X-TROL Bladder, manufacturer part number 183-11, is a replacement bladder designed for convertible well jet pumps. It is compatible with the WELL-X-TROL model WX-448. This bladder serves as a key component in well pump systems, enabling proper water pressure regulation.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the WELL-X-TROL bladder 183-11 used for?
The WELL-X-TROL bladder 183-11 is a replacement component for convertible well jet pumps, such as the WX-448 model. It regulates water pressure by separating air and water in the tank, ensuring consistent pump cycling and preventing water hammer in residential and light commercial water systems.
What are the specifications of the WELL-X-TROL bladder 183-11?
The WELL-X-TROL bladder, part number 183-11, is compatible with convertible well jet pumps and the manufacturer model WX-448. It also cross-references to Grainger number 892GA1 and ST-448. This bladder is designed as a direct replacement for maintaining proper pressure regulation in well pump systems.
Where to buy a WELL-X-TROL bladder 183-11 worldwide?
3G Electric supplies the WELL-X-TROL bladder 183-11 to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery for this replacement bladder. Contact us to order and arrange shipping to your location.
How to install a WELL-X-TROL bladder in a well pump?
To install the WELL-X-TROL bladder 183-11, first depressurize the tank and drain all water. Remove the old bladder, clean the tank interior, and insert the new bladder, ensuring the stem aligns with the tank opening. Reassemble the tank, pressurize the air charge to the correct setting, and restore water supply.
Digunakan dalam
Aplikasi umum untuk WELL-X-TROLWELL-X-TROL Produk
3G Electric memasok WELL-X-TROL bladders for well pump systems. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
