WIKA Pressure Transmitter: 0 psi to 100 psi, 20mA, 1/2 in NPT Male Conduit with Free Ends
The WIKA E-10 Pressure Transmitter (0 psi to 100 psi, 20mA output) is a stainless-steel pressure transmitter with a 1/2 in NPT male conduit with free ends. It features an accuracy of ±0.5%, an IP67 and NEMA 4X…
SKU 3G-OTH-176488
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WIKA E-10 Pressure Transmitter (0 psi to 100 psi, 20mA output) is a stainless-steel pressure transmitter with a 1/2 in NPT male conduit with free ends. It features an accuracy of ±0.5%, an IP67 and NEMA 4X rating, an overpressure of 449 psi, and a burst pressure of 2x Range, requiring 30V DC power.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the WIKA E-10 pressure transmitter used for?
The WIKA E-10 pressure transmitter is used for industrial pressure measurement in hydraulic, pneumatic, and process applications. Its stainless steel housing and IP67/NEMA 4X rating suit harsh environments. 3G Electric supplies this transmitter across 14 industrial departments, including pumps and controls, and delivers worldwide.
What are the specifications of the WIKA E-10 pressure transmitter 4365050?
The WIKA E-10 pressure transmitter (MPN 4365050) has a 0 psi to 100 psi range, 20mA output, ±0.5% accuracy, and a 1/2 in NPT male conduit with free ends. It requires 30V DC power, has a burst pressure of 2x range, and is rated IP67 and NEMA 4X with a stainless steel housing.
Where to buy the WIKA E-10 pressure transmitter worldwide?
You can source the WIKA E-10 pressure transmitter from 3G Electric, which handles logistics, customs, and delivery to worldwide destinations. As a global industrial solutions provider, we supply genuine WIKA parts across 14 departments, including combustion and pumps, ensuring you get the right transmitter for your application.
How to install the WIKA E-10 pressure transmitter?
Install the WIKA E-10 pressure transmitter by connecting the 1/2 in NPT male conduit to a compatible female NPT port. Ensure the electrical free ends are wired to a 30V DC power supply and signal receiver. Avoid overtightening and verify the IP67 seal. 3G Electric can advise on selection and support for your setup.
Digunakan dalam
Aplikasi umum untuk WIKAWIKA Produk
3G Electric memasok WIKA pressure transmitters with cable & wire leads. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.