WILTON Replacement Vise Jaw: Copper, For 8 in Vise Jaw Wd
The WILTON Replacement Vise Jaw (MPN 404-8) is a pair of copper screw-in vise jaw caps designed for 8-inch vise jaw widths. These jaws are intended for permanent or temporary workholding applications.
SKU 3G-OTH-302273
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The WILTON Replacement Vise Jaw (MPN 404-8) is a pair of copper screw-in vise jaw caps designed for 8-inch vise jaw widths. These jaws are intended for permanent or temporary workholding applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the WILTON Replacement Vise Jaw 404-8 used for?
The WILTON Replacement Vise Jaw 404-8 is a pair of copper screw-in vise jaw caps designed for 8-inch vise jaw widths. They are used for permanent or temporary workholding applications, protecting delicate workpieces from marring during clamping in industrial or workshop settings.
What are the specifications of the WILTON 404-8 vise jaw?
The WILTON 404-8 is a pair of copper screw-in vise jaw caps for 8-inch vise jaw widths. The manufacturer part number is 404-8. These jaws are designed for permanent or temporary workholding, providing a non-marring surface for clamping delicate materials.
Where to buy WILTON 404-8 vise jaws worldwide?
You can source the WILTON 404-8 copper vise jaw pair worldwide through 3G Electric. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us to order this replacement part for your 8-inch vise.
How to install WILTON 404-8 copper vise jaws?
To install the WILTON 404-8 copper vise jaws, first remove the existing jaw caps from your 8-inch vise. Align the copper caps with the screw holes on the vise jaws, then insert and tighten the screws securely. Ensure the caps are flush for even clamping pressure during workholding.
Digunakan dalam
Aplikasi umum untuk WILTONWILTON Produk
3G Electric memasok WILTON screw-in vise jaw caps. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
