Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
YANKEE 435-31/64 Spiral-Flute High-Speed Steel Chucking Reamer - Spiral-Flute High-Speed Steel Chucking Reamers
YANKEESpiral-Flute High-Speed Steel Chucking Reamers

YANKEE 435-31/64 Spiral-Flute High-Speed Steel Chucking Reamer

YANKEE Reamer dengan diameter 0.4844 in (31/64 in) adalah spiral-flute high-speed steel chucking reamer yang dirancang untuk pemesinan presisi. Dengan arah potong Right Hand, reamer ini cocok untuk memperbesar dan…

SKU 3G-OTH-213439

Juga terdaftar sebagai: 4353164 · 435 31 64 · 435-31-64

Merek
YANKEE
Item
435-31/64 Spiral-Flute High-Speed Steel Chucking Reamer
Kategori
Spiral-Flute High-Speed Steel Chucking Reamers
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

YANKEE
Manufacturer Part Number
435-31/64

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

YANKEE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

YANKEE Reamer dengan diameter 0.4844 in (31/64 in) adalah spiral-flute high-speed steel chucking reamer yang dirancang untuk pemesinan presisi. Dengan arah potong Right Hand, reamer ini cocok untuk memperbesar dan menghaluskan lubang pada berbagai material logam. Produk ini tersedia dengan nomor bagian 435-31/64.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi YANKEE Reamer 435-31/64?

YANKEE Reamer 435-31/64 memiliki diameter 0.4844 in (31/64 in), spiral flute, terbuat dari high speed steel, dan arah potong Right Hand. Cocok untuk aplikasi pemesinan presisi.

Untuk apa YANKEE Reamer spiral flute digunakan?

YANKEE Reamer spiral flute digunakan untuk memperbesar dan menghaluskan lubang dengan presisi tinggi pada material logam. Desain spiral flute membantu evakuasi serpihan saat pemotongan.

Di mana beli YANKEE Reamer 435-31/64 di Indonesia?

Anda dapat membeli YANKEE Reamer 435-31/64 melalui 3G Electric, yang memasok dan mengirimkan produk ini ke Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman sampai ke lokasi Anda.

Bagaimana cara memilih YANKEE Reamer yang tepat?

Pilih YANKEE Reamer berdasarkan diameter lubang yang diinginkan. Untuk ukuran 0.4844 in (31/64 in), pastikan material yang dikerjakan sesuai dengan high speed steel. Periksa juga arah potong Right Hand untuk aplikasi yang sesuai.

Digunakan dalam

Aplikasi umum untuk YANKEE
General machining — YANKEE straight-flute chucking reamers for finishing holes in steel and aluminum parts.
Tool and die making — YANKEE spiral-flute hand reamers for precise sizing of die cavities and bushings.
Maintenance repair — YANKEE counterbores with built-in pilots for creating recesses for screw heads in equipment housings.
Automotive manufacturing — YANKEE chucking reamers with MT1 shanks for reaming engine block bolt holes.
Aerospace component production — YANKEE left-hand spiral-flute reamers for finishing holes in titanium alloys.
Metal fabrication — YANKEE straight-flute reamers for enlarging pilot holes in structural steel assemblies.

YANKEE Produk

3G Electric memasok YANKEE spiral-flute high-speed steel chucking reamers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This spiral-flute chucking reamer is made from high-speed steel with a right-hand cutting direction. It is used for precision reaming operations to enlarge and finish holes to tight tolerances in ferrous and non-ferrous materials. Suitable for industrial metalworking applications
YANKEE
This spiral-flute chucking reamer is made from high-speed steel with a right-hand cutting direction. It is used for precision reaming operations to enlarge and finish holes to tight tolerances in ferrous and non-ferrous materials. Suitable for industrial metalworking applications
This spiral-flute chucking reamer is made from high-speed steel and has a 0.4531-inch (29/64-inch) diameter with right-hand cutting direction. It is used for precision reaming operations to enlarge and finish holes in metalworking and manufacturing applications
YANKEE
This spiral-flute chucking reamer is made from high-speed steel and has a 0.4531-inch (29/64-inch) diameter with right-hand cutting direction. It is used for precision reaming operations to enlarge and finish holes in metalworking and manufacturing applications
This spiral-flute chucking reamer is made from high-speed steel with a 0.9688-inch (31/32 inch) diameter and right-hand cutting direction. Designed for precision sizing and finishing of pre-drilled holes in metalworking, the spiral flute aids chip evacuation in through-hole and blind-hole applications
YANKEE
This spiral-flute chucking reamer is made from high-speed steel with a 0.9688-inch (31/32 inch) diameter and right-hand cutting direction. Designed for precision sizing and finishing of pre-drilled holes in metalworking, the spiral flute aids chip evacuation in through-hole and blind-hole applications
Spiral-flute chucking reamer made from high-speed steel, with a 0.3281-inch (21/64-inch) diameter and right-hand cutting direction. Designed for precision sizing and finishing of pre-drilled holes in ferrous and non-ferrous materials. The spiral flute geometry aids chip evacuation in through-hole and blind-hole reaming operations
YANKEE
Spiral-flute chucking reamer made from high-speed steel, with a 0.3281-inch (21/64-inch) diameter and right-hand cutting direction. Designed for precision sizing and finishing of pre-drilled holes in ferrous and non-ferrous materials. The spiral flute geometry aids chip evacuation in through-hole and blind-hole reaming operations
This spiral-flute chucking reamer is made from high-speed steel with a right-hand cutting direction. It is used for precision reaming operations to enlarge or finish holes to a 0.3594-inch diameter in ferrous and non-ferrous materials
YANKEE
This spiral-flute chucking reamer is made from high-speed steel with a right-hand cutting direction. It is used for precision reaming operations to enlarge or finish holes to a 0.3594-inch diameter in ferrous and non-ferrous materials
This spiral-flute chucking reamer is made from high-speed steel with a right-hand cutting direction. It is used for precision reaming operations to enlarge and finish drilled holes to a diameter of 0.6563 inches (21/32 inch) with a smooth surface finish. Common in general machining and tool-and-die work
YANKEE
This spiral-flute chucking reamer is made from high-speed steel with a right-hand cutting direction. It is used for precision reaming operations to enlarge and finish drilled holes to a diameter of 0.6563 inches (21/32 inch) with a smooth surface finish. Common in general machining and tool-and-die work

Lainnya dari YANKEE

Lihat semua YANKEE suku cadang →
This YANKEE chucking reamer has a 12.5 mm (0.4921 in) diameter and is made of high-speed steel with a spiral-flute design. It features a right-hand cutting direction and is used for enlarging or finishing pre-drilled holes to precise dimensions and surface finish. Suitable for use in drill presses, lathes, and milling machines
YANKEE
This YANKEE chucking reamer has a 12.5 mm (0.4921 in) diameter and is made of high-speed steel with a spiral-flute design. It features a right-hand cutting direction and is used for enlarging or finishing pre-drilled holes to precise dimensions and surface finish. Suitable for use in drill presses, lathes, and milling machines
This YANKEE chucking reamer is made from high-speed steel with a spiral-flute design for efficient chip evacuation. It has a #60 size and 0.04-inch diameter with right-hand cutting direction. Used for precision finishing of pre-drilled holes in metal to achieve tight tolerances
YANKEE
This YANKEE chucking reamer is made from high-speed steel with a spiral-flute design for efficient chip evacuation. It has a #60 size and 0.04-inch diameter with right-hand cutting direction. Used for precision finishing of pre-drilled holes in metal to achieve tight tolerances
This spiral-flute chucking reamer is made from high-speed steel with a 0.07-inch diameter and #50 size. It features a right-hand cutting direction and is designed for enlarging and finishing pre-drilled holes to precise diameters. The spiral-flute design aids in chip evacuation, making it suitable for both through-hole and blind-hole applications in metalworking
YANKEE
This spiral-flute chucking reamer is made from high-speed steel with a 0.07-inch diameter and #50 size. It features a right-hand cutting direction and is designed for enlarging and finishing pre-drilled holes to precise diameters. The spiral-flute design aids in chip evacuation, making it suitable for both through-hole and blind-hole applications in metalworking
This YANKEE chucking reamer is made from high-speed steel with a right-hand spiral flute design. It is used for precise enlarging or finishing of drilled holes to tight tolerances. The spiral flute aids in chip evacuation during machining operations
YANKEE
This YANKEE chucking reamer is made from high-speed steel with a right-hand spiral flute design. It is used for precise enlarging or finishing of drilled holes to tight tolerances. The spiral flute aids in chip evacuation during machining operations
This YANKEE chucking reamer is made of high-speed steel with a spiral-flute design for efficient chip evacuation. It has a 7.5 mm (0.2953 in) diameter and is intended for right-hand rotation. Used in machining to enlarge and finish pre-drilled holes to precise diameters
YANKEE
This YANKEE chucking reamer is made of high-speed steel with a spiral-flute design for efficient chip evacuation. It has a 7.5 mm (0.2953 in) diameter and is intended for right-hand rotation. Used in machining to enlarge and finish pre-drilled holes to precise diameters
This YANKEE chucking reamer is made of high-speed steel with spiral flutes for efficient chip evacuation. It has a 0.2055-inch diameter, #5 size, and right-hand cutting direction. Used for precision hole finishing in industrial machining, it is designed for use in machine tool chucks
YANKEE
This YANKEE chucking reamer is made of high-speed steel with spiral flutes for efficient chip evacuation. It has a 0.2055-inch diameter, #5 size, and right-hand cutting direction. Used for precision hole finishing in industrial machining, it is designed for use in machine tool chucks
This chucking reamer is made from high-speed steel with a spiral-flute design for efficient chip evacuation. It has a #24 size and 0.152-inch diameter with right-hand cutting direction. Used to enlarge or finish drilled holes to precise tolerances in general machining applications
YANKEE
This chucking reamer is made from high-speed steel with a spiral-flute design for efficient chip evacuation. It has a #24 size and 0.152-inch diameter with right-hand cutting direction. Used to enlarge or finish drilled holes to precise tolerances in general machining applications
This YANKEE chucking reamer is made of high-speed steel with a spiral-flute design for efficient chip evacuation. It has a 0.1719-inch (11/64-inch) diameter and is intended for right-hand rotation. Used for precision sizing and finishing of holes in metalworking operations
YANKEE
This YANKEE chucking reamer is made of high-speed steel with a spiral-flute design for efficient chip evacuation. It has a 0.1719-inch (11/64-inch) diameter and is intended for right-hand rotation. Used for precision sizing and finishing of holes in metalworking operations