Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
YANKEE 435L-0.3115 Undersized Left-Hand Spiral-Flute High-Speed - Undersized Left-Hand Spiral-Flute High-Speed Steel Chucking Reamers
YANKEEUndersized Left-Hand Spiral-Flute High-Speed Steel Chucking Reamers

YANKEE 435L-0.3115 Undersized Left-Hand Spiral-Flute High-Speed

YANKEE Chucking Reamer berdiameter 0.3115 inci ini adalah reamer spiral-flute kiri (Left-Hand) yang terbuat dari High-Speed Steel, dirancang untuk aplikasi pembesaran lubang presisi pada material logam. Dengan ukuran…

SKU 3G-OTH-213049

Juga terdaftar sebagai: 435L03115 · 435L 0 3115 · 435L-0-3115

Merek
YANKEE
Item
435L-0.3115 Undersized Left-Hand Spiral-Flute High-Speed
Kategori
Undersized Left-Hand Spiral-Flute High-Speed Steel Chucking Reamers
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

YANKEE
Manufacturer Part Number
435L-0.3115
Type
Spiral Flute, LH, High Speed Steel
Undersized
5/16 in

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

YANKEE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

YANKEE Chucking Reamer berdiameter 0.3115 inci ini adalah reamer spiral-flute kiri (Left-Hand) yang terbuat dari High-Speed Steel, dirancang untuk aplikasi pembesaran lubang presisi pada material logam. Dengan ukuran undersized 5/16 inci, produk ini ideal untuk menghasilkan lubang dengan toleransi ketat dalam proses permesinan industri. Sebagai suku cadang peralatan industri, reamer ini cocok digunakan di bengkel mesin dan pabrik manufaktur di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi YANKEE Chucking Reamer 0.3115 inci?

YANKEE Chucking Reamer ini memiliki diameter 0.3115 inci, tipe spiral-flute kiri (Left-Hand), terbuat dari High-Speed Steel, dan undersized 5/16 inci. Nomor komponennya adalah 435L-0.3115. Produk ini dirancang untuk pembesaran lubang presisi pada material logam.

Untuk apa YANKEE Chucking Reamer digunakan?

YANKEE Chucking Reamer digunakan untuk membesarkan lubang yang sudah ada dengan presisi tinggi, terutama pada material logam. Desain spiral-flute kiri (Left-Hand) membantu evakuasi serpihan saat digunakan pada mesin bubut atau mesin frais. Produk ini cocok untuk aplikasi permesinan industri yang membutuhkan toleransi ketat.

Di mana beli YANKEE Chucking Reamer di Indonesia?

Anda dapat membeli YANKEE Chucking Reamer melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah. Hubungi kami untuk informasi lebih lanjut.

Bagaimana cara memilih YANKEE Chucking Reamer yang tepat?

Pilih YANKEE Chucking Reamer berdasarkan diameter lubang yang ingin dibesarkan. Produk ini memiliki diameter 0.3115 inci dan undersized 5/16 inci, sehingga cocok untuk lubang dengan ukuran tersebut. Pastikan juga menggunakan reamer dengan arah spiral yang sesuai, yaitu Left-Hand untuk aplikasi tertentu.

Digunakan dalam

Aplikasi umum untuk YANKEE
General machining — YANKEE straight-flute chucking reamers for finishing holes in steel and aluminum parts.
Tool and die making — YANKEE spiral-flute hand reamers for precise sizing of die cavities and bushings.
Maintenance repair — YANKEE counterbores with built-in pilots for creating recesses for screw heads in equipment housings.
Automotive manufacturing — YANKEE chucking reamers with MT1 shanks for reaming engine block bolt holes.
Aerospace component production — YANKEE left-hand spiral-flute reamers for finishing holes in titanium alloys.
Metal fabrication — YANKEE straight-flute reamers for enlarging pilot holes in structural steel assemblies.

YANKEE Produk

3G Electric memasok YANKEE undersized left-hand spiral-flute high-speed steel chucking reamers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This chucking reamer features a left-hand spiral flute design in high-speed steel, oversized to 5/16 inch (0.3135 inch diameter). It is used for precision hole finishing in metalworking, particularly for chip evacuation in through-holes or interrupted cuts. Suitable for drill presses, lathes, or CNC machines requiring accurate hole sizing
YANKEE
This chucking reamer features a left-hand spiral flute design in high-speed steel, oversized to 5/16 inch (0.3135 inch diameter). It is used for precision hole finishing in metalworking, particularly for chip evacuation in through-holes or interrupted cuts. Suitable for drill presses, lathes, or CNC machines requiring accurate hole sizing
High-speed steel chucking reamer with left-hand spiral flute, oversized to 0.251 in (1/4 in). Designed for precision through-hole finishing in ferrous and non-ferrous materials, the left-hand flute geometry clears chips upward during reaming operations
YANKEE
High-speed steel chucking reamer with left-hand spiral flute, oversized to 0.251 in (1/4 in). Designed for precision through-hole finishing in ferrous and non-ferrous materials, the left-hand flute geometry clears chips upward during reaming operations
This left-hand spiral-flute chucking reamer is made from high-speed steel for precision sizing and finishing of pre-drilled holes. The left-hand flute design aids chip evacuation in through-hole reaming applications. Diameter: 5/16 in (0.3125 in)
YANKEE
This left-hand spiral-flute chucking reamer is made from high-speed steel for precision sizing and finishing of pre-drilled holes. The left-hand flute design aids chip evacuation in through-hole reaming applications. Diameter: 5/16 in (0.3125 in)
Left-hand spiral-flute chucking reamer made from high-speed steel. Diameter 0.1885 inches, oversized 3/16 inch. Used for precision hole finishing in metalworking, with left-hand spiral design for chip evacuation in through-holes
YANKEE
Left-hand spiral-flute chucking reamer made from high-speed steel. Diameter 0.1885 inches, oversized 3/16 inch. Used for precision hole finishing in metalworking, with left-hand spiral design for chip evacuation in through-holes
This chucking reamer features a left-hand spiral flute design for efficient chip evacuation in through-hole and blind-hole applications. Constructed from high-speed steel, it is oversized at 0.501 inches (1/2 inch oversized) for precision reaming in industrial metalworking
YANKEE
This chucking reamer features a left-hand spiral flute design for efficient chip evacuation in through-hole and blind-hole applications. Constructed from high-speed steel, it is oversized at 0.501 inches (1/2 inch oversized) for precision reaming in industrial metalworking
This left-hand spiral-flute chucking reamer is made of high-speed steel and is oversized by 7/16 inch with a 0.4385-inch diameter. It is used for precision reaming operations in metalworking, particularly in through-hole applications where chip evacuation is critical
YANKEE
This left-hand spiral-flute chucking reamer is made of high-speed steel and is oversized by 7/16 inch with a 0.4385-inch diameter. It is used for precision reaming operations in metalworking, particularly in through-hole applications where chip evacuation is critical

Lainnya dari YANKEE

Lihat semua YANKEE suku cadang →
This left-hand spiral-flute chucking reamer is made from high-speed steel and is undersized by 3/8 in, with a 0.374 in diameter. It is used for precision reaming operations to enlarge and finish holes to tight tolerances, particularly in through-hole applications where chip evacuation is important
YANKEE
This left-hand spiral-flute chucking reamer is made from high-speed steel and is undersized by 3/8 in, with a 0.374 in diameter. It is used for precision reaming operations to enlarge and finish holes to tight tolerances, particularly in through-hole applications where chip evacuation is important
This chucking reamer is made from high-speed steel with a left-hand spiral flute design. It has a 0.249 in diameter and is undersized by 1/4 in. Used for precision hole finishing in metalworking, the left-hand spiral flute facilitates chip evacuation during left-hand rotation
YANKEE
This chucking reamer is made from high-speed steel with a left-hand spiral flute design. It has a 0.249 in diameter and is undersized by 1/4 in. Used for precision hole finishing in metalworking, the left-hand spiral flute facilitates chip evacuation during left-hand rotation
This high-speed steel chucking reamer features a left-hand spiral flute design for efficient chip evacuation in reverse spindle rotation. It is undersized by 1/8 inch with a 0.1240 inch diameter, suitable for precision hole finishing in through-hole applications on ferrous and non-ferrous materials
YANKEE
This high-speed steel chucking reamer features a left-hand spiral flute design for efficient chip evacuation in reverse spindle rotation. It is undersized by 1/8 inch with a 0.1240 inch diameter, suitable for precision hole finishing in through-hole applications on ferrous and non-ferrous materials
This high-speed steel chucking reamer features a left-hand spiral flute for effective chip evacuation in through-hole applications. The 0.499-inch diameter is undersized by 1/2 inch, allowing final sizing after rough drilling. Designed for use in machine tool chucks for precision reaming operations
YANKEE
This high-speed steel chucking reamer features a left-hand spiral flute for effective chip evacuation in through-hole applications. The 0.499-inch diameter is undersized by 1/2 inch, allowing final sizing after rough drilling. Designed for use in machine tool chucks for precision reaming operations
This chucking reamer is made from high-speed steel with a left-hand spiral flute design. It has a diameter of 0.4365 inches and is undersized by 7/16 inch. Used for precision reaming operations in metalworking, particularly in through-hole applications where chip evacuation is important
YANKEE
This chucking reamer is made from high-speed steel with a left-hand spiral flute design. It has a diameter of 0.4365 inches and is undersized by 7/16 inch. Used for precision reaming operations in metalworking, particularly in through-hole applications where chip evacuation is important
This high-speed steel chucking reamer features a left-hand spiral flute design that evacuates chips upward, making it suitable for through-hole reaming. The 0.1865-inch diameter is undersized by 3/16 inch for precision sizing. Used in industrial metalworking to produce smooth finishes and accurate holes
YANKEE
This high-speed steel chucking reamer features a left-hand spiral flute design that evacuates chips upward, making it suitable for through-hole reaming. The 0.1865-inch diameter is undersized by 3/16 inch for precision sizing. Used in industrial metalworking to produce smooth finishes and accurate holes