Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
YANKEE Left-Hand Spiral-Flute High-Speed Steel Chucking Reamer 11/32 in - Left-Hand Spiral-Flute High-Speed Steel Chucking Reamers
YANKEELeft-Hand Spiral-Flute High-Speed Steel Chucking Reamers

YANKEE Left-Hand Spiral-Flute High-Speed Steel Chucking Reamer 11/32 in

YANKEE Chucking Reamer berdiameter 0.3438 in (11/32 in) adalah alat potong presisi dengan desain Left-Hand Spiral-Flute yang terbuat dari High-Speed Steel. Reamer ini dirancang khusus untuk aplikasi pembesaran lubang…

SKU 3G-OTH-204421

Juga terdaftar sebagai: 435L1132 · 435L 11 32 · 435L-11-32

Merek
YANKEE
Item
Left-Hand Spiral-Flute High-Speed Steel Chucking Reamer 11/32 in
Kategori
Left-Hand Spiral-Flute High-Speed Steel Chucking Reamers
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

YANKEE
Manufacturer Part Number
435L-11/32
Type
11/32 in, Spiral Flute, LH, High Speed Steel

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

YANKEE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

YANKEE Chucking Reamer berdiameter 0.3438 in (11/32 in) adalah alat potong presisi dengan desain Left-Hand Spiral-Flute yang terbuat dari High-Speed Steel. Reamer ini dirancang khusus untuk aplikasi pembesaran lubang dengan hasil akhir permukaan yang halus dan akurat, cocok digunakan di bengkel mesin dan industri manufaktur. Dengan nomor komponen 435L-11/32, produk ini merupakan pilihan andal untuk kebutuhan perkakas potong Anda.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi YANKEE Chucking Reamer 435L-11/32?

YANKEE Chucking Reamer 435L-11/32 memiliki diameter 0.3438 in (11/32 in), tipe Left-Hand Spiral-Flute, dan terbuat dari High-Speed Steel. Produk ini dirancang untuk pembesaran lubang dengan presisi tinggi.

Untuk apa YANKEE Chucking Reamer digunakan?

YANKEE Chucking Reamer digunakan untuk memperbesar dan menyelesaikan lubang dengan akurasi tinggi. Desain Left-Hand Spiral-Flute membantu evakuasi serpihan, cocok untuk material logam di bengkel mesin dan industri manufaktur.

Di mana beli YANKEE Chucking Reamer di Indonesia?

Anda dapat membeli YANKEE Chucking Reamer 435L-11/32 melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman lancar.

Bagaimana cara memilih YANKEE Chucking Reamer yang tepat?

Pilih YANKEE Chucking Reamer berdasarkan diameter lubang yang dibutuhkan, misalnya 0.3438 in (11/32 in) untuk aplikasi spesifik. Pastikan tipe Left-Hand Spiral-Flute sesuai dengan arah putaran mesin Anda untuk hasil optimal.

Digunakan dalam

Aplikasi umum untuk YANKEE
General machining — YANKEE straight-flute chucking reamers for finishing holes in steel and aluminum parts.
Tool and die making — YANKEE spiral-flute hand reamers for precise sizing of die cavities and bushings.
Maintenance repair — YANKEE counterbores with built-in pilots for creating recesses for screw heads in equipment housings.
Automotive manufacturing — YANKEE chucking reamers with MT1 shanks for reaming engine block bolt holes.
Aerospace component production — YANKEE left-hand spiral-flute reamers for finishing holes in titanium alloys.
Metal fabrication — YANKEE straight-flute reamers for enlarging pilot holes in structural steel assemblies.

YANKEE Produk

3G Electric memasok YANKEE left-hand spiral-flute high-speed steel chucking reamers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This chucking reamer is made of high-speed steel with a left-hand spiral-flute design. It has a diameter of 15/32 inch (0.4688 in). Used in machine tools such as drill presses and lathes to enlarge or finish drilled holes to a precise diameter, providing chip evacuation in through-hole reaming operations
YANKEE
This chucking reamer is made of high-speed steel with a left-hand spiral-flute design. It has a diameter of 15/32 inch (0.4688 in). Used in machine tools such as drill presses and lathes to enlarge or finish drilled holes to a precise diameter, providing chip evacuation in through-hole reaming operations
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a diameter of 11.5 mm. The left-hand spiral design facilitates chip evacuation downward, making it suitable for through-hole reaming operations in ferrous and non-ferrous materials. It is used in industrial machining for precision hole sizing and surface finishing
YANKEE
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a diameter of 11.5 mm. The left-hand spiral design facilitates chip evacuation downward, making it suitable for through-hole reaming operations in ferrous and non-ferrous materials. It is used in industrial machining for precision hole sizing and surface finishing
This high-speed steel chucking reamer features a left-hand spiral flute design for efficient chip evacuation in through-hole applications. It is used for precision reaming to enlarge and finish holes to tight tolerances in ferrous and non-ferrous materials. The 9/32 in diameter tool is suitable for use in drill chucks or collets
YANKEE
This high-speed steel chucking reamer features a left-hand spiral flute design for efficient chip evacuation in through-hole applications. It is used for precision reaming to enlarge and finish holes to tight tolerances in ferrous and non-ferrous materials. The 9/32 in diameter tool is suitable for use in drill chucks or collets
This chucking reamer is made of high-speed steel with a left-hand spiral flute design. It has a diameter of 13/32 inch (0.4062 in). Used for precision sizing and finishing of pre-drilled holes in metal, the left-hand spiral flute aids chip evacuation in through-hole reaming applications
YANKEE
This chucking reamer is made of high-speed steel with a left-hand spiral flute design. It has a diameter of 13/32 inch (0.4062 in). Used for precision sizing and finishing of pre-drilled holes in metal, the left-hand spiral flute aids chip evacuation in through-hole reaming applications
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a diameter of 11 mm (0.4331 in). It is designed for precision finishing of pre-drilled holes in metalworking, with the left-hand spiral flute aiding chip evacuation in through-hole applications. Suitable for use in machining centers and lathes
YANKEE
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a diameter of 11 mm (0.4331 in). It is designed for precision finishing of pre-drilled holes in metalworking, with the left-hand spiral flute aiding chip evacuation in through-hole applications. Suitable for use in machining centers and lathes
This left-hand spiral-flute chucking reamer is made from high-speed steel for precision sizing and finishing of pre-drilled holes. The left-hand flute design aids chip evacuation in through-hole reaming applications. Diameter: 5/16 in (0.3125 in)
YANKEE
This left-hand spiral-flute chucking reamer is made from high-speed steel for precision sizing and finishing of pre-drilled holes. The left-hand flute design aids chip evacuation in through-hole reaming applications. Diameter: 5/16 in (0.3125 in)

Lainnya dari YANKEE

Lihat semua YANKEE suku cadang →
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a 0.111-inch diameter with a #34 size. The left-hand spiral design aids chip evacuation during operation. It is used for precision hole finishing in metalworking, suitable for through-hole and blind-hole applications in machining departments
YANKEE
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a 0.111-inch diameter with a #34 size. The left-hand spiral design aids chip evacuation during operation. It is used for precision hole finishing in metalworking, suitable for through-hole and blind-hole applications in machining departments
This chucking reamer is made from high-speed steel with a left-hand spiral-flute design. It has a #40 size and a 0.098 in diameter. Used for precisely enlarging or finishing drilled holes in ferrous and non-ferrous materials in machining and tool-and-die applications
YANKEE
This chucking reamer is made from high-speed steel with a left-hand spiral-flute design. It has a #40 size and a 0.098 in diameter. Used for precisely enlarging or finishing drilled holes in ferrous and non-ferrous materials in machining and tool-and-die applications
High-speed steel chucking reamer with left-hand spiral flute, 4.5 mm diameter. Used for precision reaming of through holes, providing smooth cutting and chip evacuation in materials that produce stringy chips
YANKEE
High-speed steel chucking reamer with left-hand spiral flute, 4.5 mm diameter. Used for precision reaming of through holes, providing smooth cutting and chip evacuation in materials that produce stringy chips
This chucking reamer is made from high-speed steel with a left-hand spiral flute design. It has a #38 size and 0.1015-inch diameter, suitable for precision hole finishing in metal. The left-hand spiral flute aids chip evacuation in through-hole applications. It is used in drill chucks or collets for accurate sizing
YANKEE
This chucking reamer is made from high-speed steel with a left-hand spiral flute design. It has a #38 size and 0.1015-inch diameter, suitable for precision hole finishing in metal. The left-hand spiral flute aids chip evacuation in through-hole applications. It is used in drill chucks or collets for accurate sizing
This left-hand spiral-flute chucking reamer is made from high-speed steel, with a #49 size and 0.073-inch diameter. The left-hand spiral flute design aids chip evacuation during precision reaming operations. Suitable for finishing holes to tight tolerances in metalworking and machining applications
YANKEE
This left-hand spiral-flute chucking reamer is made from high-speed steel, with a #49 size and 0.073-inch diameter. The left-hand spiral flute design aids chip evacuation during precision reaming operations. Suitable for finishing holes to tight tolerances in metalworking and machining applications
This chucking reamer is made of high-speed steel with a left-hand spiral flute design. It has a diameter of 25/32 inch (0.7812 in). Used for precision finishing of pre-drilled holes in metalworking, the left-hand spiral flute aids chip evacuation in through-hole reaming applications
YANKEE
This chucking reamer is made of high-speed steel with a left-hand spiral flute design. It has a diameter of 25/32 inch (0.7812 in). Used for precision finishing of pre-drilled holes in metalworking, the left-hand spiral flute aids chip evacuation in through-hole reaming applications
This chucking reamer has a 31/32 in diameter and is made of high-speed steel with a left-hand spiral flute design. It is used for precision reaming of existing holes in metalworking, where the left-hand flute aids chip evacuation in through-hole applications. Suitable for use in drill chucks or collets
YANKEE
This chucking reamer has a 31/32 in diameter and is made of high-speed steel with a left-hand spiral flute design. It is used for precision reaming of existing holes in metalworking, where the left-hand flute aids chip evacuation in through-hole applications. Suitable for use in drill chucks or collets
This left-hand spiral-flute chucking reamer is made of high-speed steel and has a diameter of 29/64 in (0.4531 in). It is used for precision enlarging and finishing of drilled holes to tight tolerances. The left-hand spiral flute design aids chip evacuation and surface finish in through-hole reaming applications
YANKEE
This left-hand spiral-flute chucking reamer is made of high-speed steel and has a diameter of 29/64 in (0.4531 in). It is used for precision enlarging and finishing of drilled holes to tight tolerances. The left-hand spiral flute design aids chip evacuation and surface finish in through-hole reaming applications