Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
YANKEE Left-Hand Spiral-Flute High-Speed Steel Chucking Reamer 435L-13/64 - Left-Hand Spiral-Flute High-Speed Steel Chucking Reamers
YANKEELeft-Hand Spiral-Flute High-Speed Steel Chucking Reamers

YANKEE Left-Hand Spiral-Flute High-Speed Steel Chucking Reamer 435L-13/64

YANKEE Chucking Reamer berdiameter 0.2031 in (13/64 in) adalah alat potong presisi dengan desain Left-Hand Spiral-Flute yang terbuat dari High-Speed Steel. Reamer ini dirancang khusus untuk aplikasi pembesaran lubang…

SKU 3G-OTH-204340

Juga terdaftar sebagai: 435L1364 · 435L 13 64 · 435L-13-64

Merek
YANKEE
Item
Left-Hand Spiral-Flute High-Speed Steel Chucking Reamer 435L-13/64
Kategori
Left-Hand Spiral-Flute High-Speed Steel Chucking Reamers
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

YANKEE
Manufacturer Part Number
435L-13/64
Type
13/64 in, Spiral Flute, LH, High Speed Steel

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

YANKEE Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

YANKEE Chucking Reamer berdiameter 0.2031 in (13/64 in) adalah alat potong presisi dengan desain Left-Hand Spiral-Flute yang terbuat dari High-Speed Steel. Reamer ini dirancang khusus untuk aplikasi pembesaran lubang dengan hasil akhir yang halus dan akurat, cocok digunakan pada berbagai peralatan industri. Dengan nomor komponen 435L-13/64, produk ini merupakan pilihan andal untuk kebutuhan permesinan Anda.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa YANKEE Chucking Reamer digunakan?

YANKEE Chucking Reamer digunakan untuk memperbesar dan menghaluskan lubang yang sudah ada pada material logam. Dengan desain Left-Hand Spiral-Flute, reamer ini efektif untuk aplikasi yang memerlukan pemotongan presisi dan hasil akhir yang bersih.

Apa spesifikasi YANKEE Chucking Reamer 435L-13/64?

Spesifikasi YANKEE Chucking Reamer ini meliputi diameter 0.2031 in (13/64 in), tipe Left-Hand Spiral-Flute, dan material High-Speed Steel. Nomor komponennya adalah 435L-13/64, dan mereknya adalah YANKEE.

Di mana beli YANKEE Chucking Reamer di Indonesia?

Anda dapat membeli YANKEE Chucking Reamer melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman yang lancar ke lokasi Anda.

Bagaimana cara memilih YANKEE Chucking Reamer yang tepat?

Pilih YANKEE Chucking Reamer berdasarkan diameter lubang yang ingin diperbesar. Untuk aplikasi yang memerlukan pemotongan dengan arah putaran kiri, gunakan tipe Left-Hand Spiral-Flute seperti model 435L-13/64 dengan diameter 0.2031 in.

Digunakan dalam

Aplikasi umum untuk YANKEE
General machining — YANKEE straight-flute chucking reamers for finishing holes in steel and aluminum parts.
Tool and die making — YANKEE spiral-flute hand reamers for precise sizing of die cavities and bushings.
Maintenance repair — YANKEE counterbores with built-in pilots for creating recesses for screw heads in equipment housings.
Automotive manufacturing — YANKEE chucking reamers with MT1 shanks for reaming engine block bolt holes.
Aerospace component production — YANKEE left-hand spiral-flute reamers for finishing holes in titanium alloys.
Metal fabrication — YANKEE straight-flute reamers for enlarging pilot holes in structural steel assemblies.

YANKEE Produk

3G Electric memasok YANKEE left-hand spiral-flute high-speed steel chucking reamers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This high-speed steel chucking reamer features a left-hand spiral flute design for through-hole reaming in ferrous and non-ferrous materials. The 15/64 inch diameter tool is used to precisely enlarge or finish drilled holes, providing efficient chip evacuation and a smooth surface finish
YANKEE
This high-speed steel chucking reamer features a left-hand spiral flute design for through-hole reaming in ferrous and non-ferrous materials. The 15/64 inch diameter tool is used to precisely enlarge or finish drilled holes, providing efficient chip evacuation and a smooth surface finish
This left-hand spiral-flute chucking reamer is made of high-speed steel and has a diameter of 19/64 inch (0.2969 in). It is designed for use in machine tools such as drill presses and lathes to precisely enlarge or finish drilled holes to tight tolerances. The left-hand spiral flute aids chip evacuation in through-hole reaming applications
YANKEE
This left-hand spiral-flute chucking reamer is made of high-speed steel and has a diameter of 19/64 inch (0.2969 in). It is designed for use in machine tools such as drill presses and lathes to precisely enlarge or finish drilled holes to tight tolerances. The left-hand spiral flute aids chip evacuation in through-hole reaming applications
This chucking reamer is made of high-speed steel with a left-hand spiral flute design. It has a diameter of 13/32 inch (0.4062 in). Used for precision sizing and finishing of pre-drilled holes in metal, the left-hand spiral flute aids chip evacuation in through-hole reaming applications
YANKEE
This chucking reamer is made of high-speed steel with a left-hand spiral flute design. It has a diameter of 13/32 inch (0.4062 in). Used for precision sizing and finishing of pre-drilled holes in metal, the left-hand spiral flute aids chip evacuation in through-hole reaming applications
This chucking reamer has a 17/64 in diameter and is made of high-speed steel with a left-hand spiral flute design. It is used for precision reaming of holes in metalworking and machining operations, particularly in through-hole applications where chip evacuation is important
YANKEE
This chucking reamer has a 17/64 in diameter and is made of high-speed steel with a left-hand spiral flute design. It is used for precision reaming of holes in metalworking and machining operations, particularly in through-hole applications where chip evacuation is important
YANKEE Chucking Reamer: 0.4688 in Dia, 15/32 in, Spiral Flute, LH, High Speed Steel (MPN 435L-15/32)
YANKEE
YANKEE Chucking Reamer: 0.4688 in Dia, 15/32 in, Spiral Flute, LH, High Speed Steel (MPN 435L-15/32)
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a diameter of 5 mm (0.1969 in). It is used to precisely enlarge or finish drilled holes to tight tolerances, with the left-hand flute design aiding chip evacuation in through-hole applications
YANKEE
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a diameter of 5 mm (0.1969 in). It is used to precisely enlarge or finish drilled holes to tight tolerances, with the left-hand flute design aiding chip evacuation in through-hole applications

Lainnya dari YANKEE

Lihat semua YANKEE suku cadang →
This chucking reamer has a 0.625 in diameter and 5/8 in size. It is made from high-speed steel with a left-hand spiral flute design. Used for enlarging or finishing drilled holes to tight tolerances in metalworking and machining applications
YANKEE
This chucking reamer has a 0.625 in diameter and 5/8 in size. It is made from high-speed steel with a left-hand spiral flute design. Used for enlarging or finishing drilled holes to tight tolerances in metalworking and machining applications
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a 9 mm (0.3543 in) diameter. Designed for left-hand rotation, it is used for precision finishing of pre-drilled holes in metalworking and industrial manufacturing applications where tight tolerances are required
YANKEE
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a 9 mm (0.3543 in) diameter. Designed for left-hand rotation, it is used for precision finishing of pre-drilled holes in metalworking and industrial manufacturing applications where tight tolerances are required
This chucking reamer is made of high-speed steel with a left-hand spiral flute design. It has a diameter of 25/64 inch (0.3906 inches). Used for precisely enlarging and finishing pre-drilled holes in metalworking operations, the left-hand spiral flute aids chip evacuation in through-hole applications
YANKEE
This chucking reamer is made of high-speed steel with a left-hand spiral flute design. It has a diameter of 25/64 inch (0.3906 inches). Used for precisely enlarging and finishing pre-drilled holes in metalworking operations, the left-hand spiral flute aids chip evacuation in through-hole applications
This YANKEE chucking reamer is made from high-speed steel with a left-hand spiral flute design. It has a 0.1695-inch diameter and is sized #18. Used in machine tools to precisely enlarge or finish drilled holes, the left-hand spiral flute aids chip evacuation in through-hole applications
YANKEE
This YANKEE chucking reamer is made from high-speed steel with a left-hand spiral flute design. It has a 0.1695-inch diameter and is sized #18. Used in machine tools to precisely enlarge or finish drilled holes, the left-hand spiral flute aids chip evacuation in through-hole applications
This 1.25 in diameter chucking reamer features left-hand spiral flutes and is made of high-speed steel. The left-hand spiral design aids chip evacuation, making it suitable for finishing or enlarging holes in metal, particularly in blind hole applications
YANKEE
This 1.25 in diameter chucking reamer features left-hand spiral flutes and is made of high-speed steel. The left-hand spiral design aids chip evacuation, making it suitable for finishing or enlarging holes in metal, particularly in blind hole applications
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a diameter of 11 mm (0.4331 in). It is designed for precision finishing of pre-drilled holes in metalworking, with the left-hand spiral flute aiding chip evacuation in through-hole applications. Suitable for use in machining centers and lathes
YANKEE
This left-hand spiral-flute chucking reamer is made from high-speed steel and has a diameter of 11 mm (0.4331 in). It is designed for precision finishing of pre-drilled holes in metalworking, with the left-hand spiral flute aiding chip evacuation in through-hole applications. Suitable for use in machining centers and lathes
This chucking reamer is made from high-speed steel with a left-hand spiral flute design. It has a 0.5 in diameter and a 1/2 in shank, intended for left-hand rotation. Used in drill presses, lathes, and milling machines to precisely enlarge or finish drilled holes to tight tolerances
YANKEE
This chucking reamer is made from high-speed steel with a left-hand spiral flute design. It has a 0.5 in diameter and a 1/2 in shank, intended for left-hand rotation. Used in drill presses, lathes, and milling machines to precisely enlarge or finish drilled holes to tight tolerances
This chucking reamer is made of high-speed steel with a left-hand spiral flute design. It has a 0.154 in diameter and corresponds to #23 size. Used for precisely enlarging or finishing drilled holes in through-hole applications, the left-hand spiral flute aids chip evacuation in production machining
YANKEE
This chucking reamer is made of high-speed steel with a left-hand spiral flute design. It has a 0.154 in diameter and corresponds to #23 size. Used for precisely enlarging or finishing drilled holes in through-hole applications, the left-hand spiral flute aids chip evacuation in production machining