ZURN Closed End Cap: 3 1/2 in Overall Lg, 10 1/2 in Overall Wd, 16 1/2 in Overall Ht
The ZURN Closed End Cap (MPN P882-E1-NS) is an HDPE end cap and connector for trench drain systems, measuring 3 1/2 inches in overall length, 10 1/2 inches in overall width, and 16 1/2 inches in overall height. This…
SKU 3G-OTH-425286
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ZURN Closed End Cap (MPN P882-E1-NS) is an HDPE end cap and connector for trench drain systems, measuring 3 1/2 inches in overall length, 10 1/2 inches in overall width, and 16 1/2 inches in overall height. This ZURN-branded component is designed to terminate or seal the end of a trench drain channel.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a ZURN closed end cap used for?
A ZURN closed end cap terminates or seals the end of a trench drain channel, preventing water or debris from escaping. It is used in industrial drainage systems for floors, loading docks, and wash-down areas where a watertight closure is required.
What are the specifications of the ZURN P882-E1-NS end cap?
The ZURN P882-E1-NS closed end cap is made of HDPE and measures 3 1/2 inches overall length, 10 1/2 inches overall width, and 16 1/2 inches overall height. It is designed for use with ZURN trench drain systems to provide a secure end closure.
Where to buy a ZURN closed end cap worldwide?
3G Electric supplies the ZURN closed end cap (P882-E1-NS) worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this HDPE trench drain component to your facility, regardless of location.
How to install a ZURN closed end cap on a trench drain?
To install a ZURN closed end cap, ensure the trench drain channel end is clean and dry. Apply a compatible HDPE adhesive or sealant to the cap's mating surface, then press it firmly onto the channel end. Allow proper curing time before exposing the drain to water flow.
Digunakan dalam
Aplikasi umum untuk ZURNZURN Produk
3G Electric memasok ZURN end caps & connectors for trench drain systems. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
