Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
BerandaSumber DayaATC PMR (Phase Monitor Relay) PN: SLD-230-ASA | Buyer's Guide

ATC PMR (Phase Monitor Relay) PN: SLD-230-ASA | Buyer's Guide

The ATC PMR (Phase Monitor Relay) PN: SLD-230-ASA (P/N SLD-230-ASA) is a critical control component that protects three-phase motors and equipment from phase loss, phase reversal, and voltage imbalance. This guide explains how it works, how to select the right relay, and where to source it worldwide.
Tanggal Publikasi30 August 2026 · 09:39 am
Pemeriksa Teknis3G Electric Technical Team
ATC PMR (Phase Monitor Relay) PN: SLD-230-ASA | Buyer's Guide
Controls
Daftar Isiexpand_more

The ATC PMR (Phase Monitor Relay) PN: SLD-230-ASA (P/N SLD-230-ASA) is a dedicated three-phase monitoring relay designed to protect motors and driven equipment from supply faults. It continuously measures the incoming three-phase voltage and trips its output relay when it detects phase loss, phase sequence reversal, or voltage imbalance beyond a set threshold. This relay is a standard choice for OEM panels, pump controls, and HVAC systems where an unscheduled shutdown is preferable to a burnt-out motor.

What is a Phase Monitor Relay?

A phase monitor relay is a protective device that supervises the quality of a three-phase power supply. It is wired into the control circuit of a motor starter or contactor and will interrupt the control signal if the supply becomes unsafe. The ATC PMR (Phase Monitor Relay) PN: SLD-230-ASA (P/N SLD-230-ASA) is a specific model in this category, rated for 230 VAC systems.

According to the ATC Diversified Electronics PMR Series datasheet, 2023: "The PMR series monitors three-phase power lines for phase loss, phase reversal, and low voltage, providing a relay output for motor control."

How Does the ATC SLD-230-ASA Work?

The relay compares the three phase voltages against an internal reference. If any phase drops below the under-voltage set point, or if the phase rotation is incorrect, the internal relay de-energizes. This action opens the control circuit, stopping the motor before damage occurs. The SLD-230-ASA is designed for continuous duty and provides a fail-safe operation: if the relay loses its own supply, the output drops out.

Key Specifications of the SLD-230-ASA

ParameterSpecification
Nominal Supply Voltage230 VAC (50/60 Hz)
Monitoring FunctionPhase loss, phase reversal, under-voltage
Output TypeRelay (SPDT)
MountingDIN rail or panel mount
Operating Frequency50 Hz / 60 Hz

Types and Applications

Phase monitor relays are categorized by their voltage range and monitoring features. The SLD-230-ASA is a fixed-voltage model, ideal for dedicated 230 VAC systems. Other types include adjustable-range relays and models with built-in time delays. Common applications include:

  • Protecting irrigation pump motors from single-phasing.
  • Monitoring conveyor systems in material handling.
  • Supervising HVAC compressor units.
  • Ensuring correct phase rotation on newly installed machinery.

How to Select the Right Phase Monitor Relay

  1. Verify the system voltage: Confirm your supply is 230 VAC (50/60 Hz) to match the SLD-230-ASA. Using a relay with the wrong voltage rating will cause immediate failure.
  2. Determine the load type: For motor loads, ensure the relay's output contacts are rated for the contactor coil current.
  3. Check the frequency: The SLD-230-ASA operates on both 50 Hz and 60 Hz, making it suitable for international use.
  4. Consider the environment: For dusty or wet locations, verify the relay's ingress protection rating.
  5. Decide on adjustability: If your supply voltage fluctuates, consider an adjustable model instead of a fixed one.
ProductTypeKey FeatureApplication
WESTWARD 13.5-inch Reversible RatchetHand Tool13.5 in (343 mm) length, 5° arc swingMaintenance in confined spaces
WESTWARD 17.25-inch Reversible RatchetHand Tool17.25 in (438 mm) length, 5° arc swingHeavy-duty assembly tasks
SCS Monitor Verification TesterESD AccessoryNIST-traceable verificationESD control program audits
LUXOR 15.6-inch Portable MonitorDisplayUSB-C connection, magnetic mountPortable workstation setup

While the ATC SLD-230-ASA is a control component, the tools and accessories above support the installation and maintenance of such systems. The WESTWARD ratchets are ideal for tightening panel hardware, while the SCS tester ensures your ESD program remains compliant.

Why Source from 3G Electric?

3G Electric is a global industrial solutions provider with over 35 years of experience. We stock the ATC PMR (Phase Monitor Relay) PN: SLD-230-ASA (P/N SLD-230-ASA) and support it with technical expertise. Our team can assist with cross-market voltage and frequency variants, and we provide export documentation for worldwide delivery. We supply across 14 industrial departments, ensuring you get the right part, not just a part.

Frequently Asked Questions

What is the ATC PMR (Phase Monitor Relay) PN: SLD-230-ASA used for?

It is used to protect three-phase motors from damage caused by phase loss, phase reversal, or voltage imbalance. It monitors the supply and trips a relay to stop the motor if a fault is detected.

Can I use the SLD-230-ASA on a 400 VAC system?

No. The SLD-230-ASA is specifically rated for 230 VAC. For 400 VAC systems, you would need a different model, such as the SLD-400 series. Always match the relay voltage to your supply.

How do I buy the ATC SLD-230-ASA in Worldwide?

Contact 3G Electric for a quote. We supply worldwide with export documentation and can advise on the correct model for your local grid frequency (50 Hz or 60 Hz).

What is the difference between a phase monitor relay and a phase sequence relay?

A phase monitor relay checks for loss, reversal, and imbalance. A phase sequence relay only checks the rotation direction. The SLD-230-ASA combines both functions in one unit.

Key Takeaways

  • The ATC SLD-230-ASA is a 230 VAC phase monitor relay protecting against phase loss, reversal, and under-voltage.
  • It operates on both 50 Hz and 60 Hz supplies, making it a global solution.
  • Always verify your system voltage before purchasing to avoid misapplication.
  • 3G Electric offers technical support and worldwide shipping for this control component.

Contact 3G Electric today for a quote on the ATC PMR (Phase Monitor Relay) PN: SLD-230-ASA (P/N SLD-230-ASA) or for assistance selecting the right phase monitoring solution for your application.

Pertanyaan yang Sering Diajukan
What is the ATC PMR (Phase Monitor Relay) PN: SLD-230-ASA used for?+
It protects three-phase motors from damage caused by phase loss, phase reversal, or voltage imbalance. It monitors the supply and trips a relay to stop the motor if a fault is detected.
Can I use the SLD-230-ASA on a 400 VAC system?+
No. The SLD-230-ASA is specifically rated for 230 VAC. For 400 VAC systems, you would need a different model. Always match the relay voltage to your supply.
How do I buy the ATC SLD-230-ASA in Worldwide?+
Contact 3G Electric for a quote. We supply worldwide with export documentation and can advise on the correct model for your local grid frequency (50 Hz or 60 Hz).
What is the difference between a phase monitor relay and a phase sequence relay?+
A phase monitor relay checks for loss, reversal, and imbalance. A phase sequence relay only checks the rotation direction. The SLD-230-ASA combines both functions.
Perangkat Keras yang Direkomendasikan
Verification tester accessory for SCS 725 monitors. Provides NIST-traceable field verification of monitor performance. Used to confirm proper operation of antistatic monitors in ESD control programs.
SCS
Verification tester accessory for SCS 725 monitors. Provides NIST-traceable field verification of monitor performance. Used to confirm proper operation of antistatic monitors in ESD control programs.
Lihat Spesifikasi
Reversible ratchet with chrome finish and 5° minimum arc swing. Overall length of 13 1/2 inches. Suitable for tightening and loosening fasteners in confined spaces, such as automotive repair and machinery maintenance.
WESTWARD
Reversible ratchet with chrome finish and 5° minimum arc swing. Overall length of 13 1/2 inches. Suitable for tightening and loosening fasteners in confined spaces, such as automotive repair and machinery maintenance.
Lihat Spesifikasi
This reversible ratchet features a chrome finish and a 5° minimum arc swing. With an overall length of 17 1/4 inches, it is suited for tightening and loosening fasteners in confined spaces during general maintenance and assembly tasks.
WESTWARD
This reversible ratchet features a chrome finish and a 5° minimum arc swing. With an overall length of 17 1/4 inches, it is suited for tightening and loosening fasteners in confined spaces during general maintenance and assembly tasks.
Lihat Spesifikasi
support_agent
Butuh Bantuan Teknis?
Para engineer kami tersedia untuk konsultasi khusus mengenai rakitan peralatan yang kompleks.
Hubungi Dukungan