Beckett Spare Parts: Buyer's Guide to Igniters, Controls & Fuel System Components

What Are Beckett Spare Parts?

Beckett manufactures a comprehensive range of replacement components for oil and gas burner systems, serving industrial heating, commercial HVAC, and facility maintenance. The product portfolio spans fuel-system safety valves, ignition transformers, burner controls, deaerators, and electric motors—all designed for drop-in compatibility with Beckett burners and legacy equipment from other OEMs.

3G Electric carries 259 Beckett products across eight categories: Fuel System (76 SKUs), Spare Parts (63), Tools & Testers (49), Burners (30), Controls (27), Hydronic Components (8), Electrical (5), and Chemicals (1). This guide focuses on the most-ordered spare-parts families and how to specify the correct part for your application.

PowerLight Oil Igniters: Voltage Options & Specifications

PowerLight igniters are the most common Beckett ignition transformers in the field. They generate high-voltage spark to ignite fuel oil in burner combustion chambers. Three voltage families cover the majority of AC and DC burner installations:

All three models operate across 5 to 95% relative humidity and are rated for continuous or interrupted duty. The 12 VDC and 24 VDC versions suit low-voltage burner circuits and DC-powered equipment (e.g., the ADC Oil Burner, SKU AF44WH). The 120 VAC model integrates into AC-powered systems like the SF Oil Burner (SKU B711) and SM Oil Burner (SKU F-12).

Selection tip: Check your burner's control schematic or the existing igniter's label to confirm voltage class. Mismatched voltage will prevent spark generation and cause ignition lockout.

GeniSys Burner Controls: Oil & Gas Models

Beckett's GeniSys line provides integrated flame-detection and motor-control logic for both oil and gas burners. Two primary families address different fuel types and voltage requirements:

GeniSys 7556 (12 V Oil Burner Control)

SKU 7556A0000 is a 12 VDC control module for oil burners. Key specifications:

• Motor output: 12 VDC, 20 full-load amps (FLA), 100 locked-rotor amps (LRA)
• Lockout time: 15 seconds (no ignition = shutdown)
• Operating humidity: 5 to 95% RH, condensing
• Available variants: 7556A0000U, 7556P1530U, 7556P1560U, 7556P152MU, 7556P158MU

The 7556 suits low-voltage DC burner circuits and is commonly paired with 12 VDC motors and ignition systems.

GeniSys 7590 (24 V Gas Burner Control)

SKU 7590C0001 governs gas burner ignition and flame safety. Specifications:

• Input voltage: 120 V, 50/60 Hz (igniter, motor); 24 V (18–30 VA) for control logic
• Operating humidity: 5 to 95% RH, non-condensing
• Approvals: UL listing per ANSI Z21.20, UL 372, and CSA C22.2 No. 199
• Available models: 7590D0001, 7590T0001, 7590C0001

The 7590 is designed for gas burners (natural gas or propane) and includes flame-detection logic to ensure safe operation.

Fuel System Components: Valves & Deaerators

Beckett fuel-system spare parts ensure clean, pressurized oil delivery and prevent vapor lock in heating systems.

Firomatic Fire Safety Valves

SKU 12210 is a tank-mounted safety valve that stops fuel flow if burner pressure exceeds safe limits. Specifications:

• Seal material: Double seal washer/o-ring system with high-grade Viton® equivalent
• Compatible tank valve models: 12320, 12340, 12350
• Fuel compatibility: No. 2 fuel oil and kerosene; UL 842 listed

Install this valve on the tank outlet to protect against overpressure and fuel leakage.

Tigerloop LT Oil Deaerator

SKU S220-17 removes dissolved air and water from heating oil, preventing vapor lock and improving burner efficiency. Specifications:

• Connections: 1/4″ NPT (female)
• Temperature range: −40 °F to +105 °F
• Fuel compatibility: No. 1 & 2 heating oil, B5 BioHeat®
• Maximum inlet pressure: 8 PSI

The Tigerloop LT is rated for low-temperature applications and integrates into supply lines between the tank and burner pump.

Replacement Motors & Electrical Components

Beckett burners use standard NEMA-flange electric motors. A common spare is the Motor 22825U (SKU INV-BECKET-0022) for AFG burners:

When ordering a replacement motor, confirm the NEMA flange type, horsepower rating, and voltage to ensure mechanical and electrical fit.

How to Identify the Correct Part Number

Follow these steps to source the right Beckett spare part:

1. Locate the burner model. Check the burner's nameplate or control panel for the model designation (e.g., CF3500, CG10, ADC, SF, SM).
2. Determine the fuel type. Confirm whether your system burns oil (No. 1 or No. 2 heating oil, kerosene, diesel) or gas (natural gas or propane).
3. Check the voltage class. For igniters and controls, verify the input voltage on the existing component or in the system schematic (12 VDC, 24 VDC, 120 VAC, 208–480 VAC).
4. Note the operating environment. If the equipment is in a damp location, confirm humidity tolerance (condensing vs. non-condensing).
5. Cross-reference the 3G Electric catalog. Match the burner model and voltage to the SKU in the Beckett product list. For example, a 12 VDC oil burner requires the PowerLight 12 VDC igniter (SKU 51829U) and the GeniSys 7556 control (SKU 7556A0000).
6. Request a quotation. Contact 3G Electric with the SKU and application details; lead time and availability will be confirmed.

Compatibility & Installation Basics

Beckett spare parts are designed for drop-in replacement, but several compatibility rules apply:

• Voltage matching is non-negotiable. A 24 VDC igniter will not function on a 12 VDC circuit and may damage the control module.
• Fuel type must align. Oil igniters and controls are not interchangeable with gas models. Verify the burner's fuel input before ordering.
• NEMA flange and motor horsepower must match. Incorrect motor mounting will prevent proper coupling to the fuel pump or air blower.
• Seal materials in fuel-system components. Firomatic valves use Viton® equivalent seals; confirm compatibility with your fuel type and temperature range.
• Pressure ratings. The Tigerloop LT deaerator is rated to 8 PSI inlet pressure; exceeding this limit may cause seal failure.

When in doubt, consult the original equipment manual or contact 3G Electric with your burner model and system schematic.

Sourcing Genuine Beckett Parts Through 3G Electric

3G Electric is an authorised distributor of Beckett spare parts and components. The company maintains a catalog of 259 Beckett SKUs and sources parts globally to plant engineers, facility managers, and procurement teams. Lead times and availability are confirmed at quotation; parts are available to order and shipped worldwide.

To place an order or request a quote:

1. Gather the burner model, fuel type, and voltage class from your equipment.
2. Identify the SKU from the 3G Electric Beckett catalog or this guide.
3. Contact 3G Electric with the SKU, quantity, and delivery location.
4. Receive a quotation with confirmed lead time and shipping terms.

Frequently Asked Questions

What is the difference between PowerLight 12 VDC and 24 VDC igniters?

The 12 VDC model (SKU 51829U) accepts 10.8–16 VDC input and draws up to 2.5 A; the 24 VDC model (SKU 51830U) accepts 21.6–32 VDC and draws up to 2.0 A. Both output 20 kV peak spark. Choose based on your burner's control voltage—mismatched voltage will prevent ignition.

Can I use a GeniSys 7556 oil control on a gas burner?

No. The GeniSys 7556 (SKU 7556A0000) is designed for oil burners with 12 VDC motor output. Gas burners require the GeniSys 7590 (SKU 7590C0001), which includes gas-specific flame detection and operates on 120 V / 24 V logic.

What does the Tigerloop LT deaerator do?

The Tigerloop LT (SKU S220-17) removes dissolved air and water from heating oil, preventing vapor lock and improving burner combustion efficiency. It is installed inline between the fuel tank and burner pump and is rated for −40 °F to +105 °F and up to 8 PSI inlet pressure.

How do I know which motor to order for my Beckett burner?

Check the burner's nameplate for the motor horsepower, NEMA flange type, and voltage. The Motor 22825U (SKU INV-BECKET-0022) is a 1/7 HP, 220/240 VAC, NEMA 48M motor for AFG burners. Confirm all three attributes match your original motor before ordering.

Are Beckett fuel-system valves compatible with all heating oils?

The Firomatic Fire Safety Valve (SKU 12210) is certified for No. 2 fuel oil and kerosene (UL 842 listed). The Tigerloop LT deaerator (SKU S220-17) supports No. 1 & 2 heating oil and B5 BioHeat®. Always verify fuel compatibility on the component label before installation.

What is the lockout time on the GeniSys 7556 control?

The GeniSys 7556 (SKU 7556A0000) has a 15-second lockout time. If the burner does not establish flame within 15 seconds of ignition, the control shuts down the motor and enters lockout mode, requiring manual reset.

Can I order Beckett spare parts with a lead time, or must they be available to order?

3G Electric sources Beckett parts to order. Lead times are confirmed at quotation based on availability and your delivery location. Parts are available to order worldwide; 3G Electric handles customs and logistics.