Gas Nozzle Buyer's Guide for Industrial Burners & Combustion Systems in Indonesia
What Is a Gas Nozzle?
A gas nozzle is a precision fuel-atomization component that delivers fuel (typically oil or gas) from a burner control system into a combustion chamber in fine, controlled spray patterns. In Indonesia's industrial sector—from textile mills in Java to petrochemical facilities in Batam and Surabaya—gas nozzles are foundational to combustion efficiency, emissions compliance, and safe burner operation. Brands such as Jetoil and CBM design nozzles for specific spray angles and flow rates; 3G Electric has supplied these components for over 35 years to industrial plants, district heating systems, and OEM manufacturers across Indonesia.
How Gas Nozzles Work
Gas nozzles operate on a simple principle: pressurized fuel enters the nozzle body, passes through internal passages, and exits through a precisely machined orifice. The shape and size of the orifice determine the spray pattern (hollow-cone, full-cone) and spray angle (60°, 80°, etc.). Spray angle affects flame shape and combustion chamber geometry; flow rate (measured in USGPH—US gallons per hour—or L/h at a given bar pressure) must match the burner's fuel pump capacity. Temperature resistance and material (stainless steel, brass) ensure durability in high-heat environments typical of Indonesian industrial applications.
Gas Nozzle Specification Table
| Model | Flow Rate (USGPH) | Spray Angle | Nozzle Type | Best For |
|---|---|---|---|---|
| [[PRODUCT:JTO36008|Jetoil 0.40 80° H]] | 0.40 USGPH | 80° | Hollow-cone | Small burners, low-capacity systems |
| [[PRODUCT:FLU05028|CBM Fluidics 0.50 60° SF]] | 0.50 USGPH (1.4 L/h @ 10 bar) | 60° | Full-cone | Compact furnaces, precision heating |
| [[PRODUCT:JTO16054|Jetoil 3.50 80° S]] | 3.50 USGPH | 80° | Full-cone | Medium-duty industrial burners |
| [[PRODUCT:ZROTINKIT-000|Interpump ROTOCLEAN KIT W/ NOZZLE 140]] | ~1.4 USGPH (typical nozzle 140) | Manufacturer-specified | Full-cone with cleaning kit | Field maintenance, rapid nozzle replacement |
How to Select the Right Gas Nozzle
- Verify burner fuel pump capacity: Match the nozzle flow rate (USGPH) to your burner's maximum fuel delivery. Over-sizing causes excess pressure; under-sizing reduces heat output.
- Confirm spray angle requirements: 60° nozzles suit compact chambers; 80° nozzles work in larger combustion spaces. Check your burner's technical manual or consult our engineers.
- Select nozzle type (hollow vs. full-cone): Hollow-cone creates a ring spray (better for tall chambers), full-cone distributes fuel evenly (compact systems). Jetoil and CBM both supply both types.
- Assess operating pressure: Most industrial nozzles operate 2.4–10 bar. Verify your fuel pump's discharge pressure matches nozzle specs.
- Check materials for your environment: Stainless steel (SS) resists high-temperature corrosion; brass suits lower-temperature auxiliary burners common in Indonesian textile and food-processing plants.
- Account for fuel type: Heavy fuel oil (HFO) requires larger orifices and heating; light diesel (HSD) used throughout Indonesia works with standard nozzles. Confirm your fuel grade with the nozzle rating.
Product Comparison & 3G Electric Inventory
3G Electric stocks six gas nozzle and control products covering flow rates from 0.40 to 3.50 USGPH. We are authorized distributor for Jetoil, CBM, SIT, Elektrogas, Interpump, and Dungs—brands trusted by burner OEMs and industrial end-users across Jakarta, Surabaya, Batam, and regional Indonesia. All products ship with complete import documentation, English-language technical support, and rapid delivery.
| Product | SKU | Type | Flow / Specs | Typical Application |
|---|---|---|---|---|
| [[PRODUCT:JTO36008|Jetoil 0.40 80° H]] | JTO36008 | Hollow-cone nozzle | 0.40 USGPH, 80° angle | Small domestic/light industrial burners |
| [[PRODUCT:FLU05028|CBM Fluidics 0.50 60° SF]] | FLU05028 | Full-cone nozzle | 0.50 USGPH @ 10 bar, 60° angle | Precision heating, compact furnaces |
| [[PRODUCT:JTO16054|Jetoil 3.50 80° S]] | JTO16054 | Full-cone nozzle | 3.50 USGPH, 80° angle | Medium-capacity industrial burners |
| [[PRODUCT:ZROTINKIT-000|Interpump ROTOCLEAN KIT]] | ZROTINKIT-000 | Nozzle + cleaning kit | 140-series nozzle, maintenance system | Field service, nozzle cleaning/replacement |
| [[PRODUCT:BLO05157|SIT Gas Block Sigma 0845072]] | BLO05157 | Gas control block | Safety block, dual-stage regulation | Burner safety & fuel isolation |
| [[PRODUCT:ELK46001|Elektrogas Proportional Valve LMV21 3/4"]] | ELK46001 | Proportional gas valve | 3/4" DN20, modulating fuel control | Burner load modulation, precision firing |
Inline FAQ: Gas Nozzle Selection & Support
Q: What is the difference between 60° and 80° spray angles?
A: 60° nozzles produce a narrower spray cone, ideal for compact combustion chambers; 80° spreads fuel wider, suited to larger furnaces. Choose based on your chamber geometry to avoid wall impingement and unburned fuel.
Q: Can I use a gas nozzle on a heavy fuel oil (HFO) system in Indonesia?
A: Standard nozzles designed for HFO require heating and larger orifices. Light diesel (HSD) common in Indonesian operations works with most industrial nozzles. Confirm fuel type with us before ordering.
Q: How do I know if my nozzle needs replacement?
A: Signs include smoking exhaust, combustion instability, or higher NOₓ emissions. Nozzle clogging from sediment is common in aged fuel tanks; the [[PRODUCT:ZROTINKIT-000|Interpump ROTOCLEAN KIT]] enables field cleaning and rapid replacement.
Q: Does 3G Electric offer technical sizing assistance for Indonesia operations?
A: Yes. Our engineers in Jakarta provide free burner-to-nozzle sizing, pressure-drop calculations, and import documentation support. Email or call for a quote tailored to your facility's fuel pump and combustion chamber.
Why Source from 3G Electric?
3G Electric is an authorized distributor of Jetoil, CBM, SIT, Elektrogas, Interpump, and Dungs—the leading OEM brands for gas nozzles and burner controls. With 35+ years serving Indonesia's manufacturing, energy, and utilities sectors, we maintain stock in Jakarta, Surabaya, and Batam, ensuring rapid delivery and full import paperwork. Our English-speaking technical team provides sizing support, pressure calculations, and troubleshooting at no extra charge. All products carry OEM warranties and come with complete documentation compliant with Indonesian standards.
Key Takeaways
- Match nozzle flow rate (USGPH) and spray angle (60°–80°) to your burner specifications and combustion chamber geometry.
- 3G Electric stocks Jetoil, CBM, Interpump, and SIT nozzles covering 0.40–3.50 USGPH for Indonesia's diverse industrial applications.
- Verify operating pressure (typically 2.4–10 bar), fuel type (light diesel vs. heavy fuel oil), and material (stainless steel or brass) before ordering.
- Free technical sizing and import support available—contact our Jakarta, Surabaya, or Batam offices for a quote.
Contact 3G Electric for Gas Nozzle Quotes & Technical Support
Ready to upgrade or replace your burner nozzles? 3G Electric offers competitive pricing, rapid delivery across Indonesia, and expert technical guidance. Request a quote, send your burner specifications, or speak with our engineers—all support in English.
