Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Describe the job or paste specifications. Press Enter or Search.
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar

AEMC INSTRUMENTS

AEMC Instruments is a manufacturer of portable electrical test and measurement equipment, with a product history spanning several decades. The company's catalog covers insulation testers, ground resistance testers, micro-ohmmeters, power quality analyzers, clamp-on meters, and data loggers. These instruments are used by plant engineers, maintenance crews, and electrical contractors for commissioning, preventive maintenance, and troubleshooting of low- and medium-voltage systems. The product families supplied by 3G Electric include three-phase power quality analyzers, earth ground resistance testers, milli- and micro-ohmmeters, and megohmmeters for harsh environments. Many models carry CAT III or CAT IV safety ratings and IP-rated enclosures, making them suitable for work on distribution circuits and in outdoor or dusty industrial settings. For example, the 8336 power quality analyzer offers CAT III 1000V / CAT IV 600V safety ratings and an IP53 enclosure, with a sampling rate of 256 samples per cycle for waveform analysis. Ground resistance testers such as the 6424 and 6472 kits provide measurement ranges from 0.01 ohm to 100 kilohm, with test currents up to 250 mA and IP53 or IP65 enclosures. The 6255 and 6240 micro-ohmmeters cover low-resistance measurements from 2 microohm to 2.5 kilohm, with CAT III ratings and RS-232 or USB connectivity. The 6555 megohmmeter measures insulation resistance up to 30 teraohm at 5,000V DC, with CAT IV 1000V rating and IP54 protection. These instruments are typically used for acceptance testing of switchgear, motors, transformers, and grounding systems, as well as for power quality surveys and harmonic analysis. 3G Electric supplies the AEMC Instruments line with a focus on matching the correct model and kit configuration to the application. Because many AEMC products are available in multiple kit variants—differing in lead length, test current, and included accessories—3G Electric helps buyers select the appropriate part number based on measurement range, safety category, and environmental rating. The distributor also provides logistics support for international shipments, including documentation and handling for orders that cross borders. For technical buyers, the key selection criteria are the measurement range, test voltage or current, CAT safety rating, IP rating, and communication interface. AEMC Instruments publishes detailed specifications for each model, and 3G Electric can provide access to datasheets and manuals to support specification review. The product line is not limited to the items listed above; 3G Electric can source additional AEMC Instruments models and accessories on request. This includes current probes, test leads, software, and calibration kits. The distributor's role is to facilitate procurement of these instruments for maintenance and engineering teams, without making claims about performance beyond the published specifications. All products are supplied as new, with manufacturer warranty applicable. For buyers who need to verify compatibility with existing test procedures or safety programs, 3G Electric can assist with part number cross-referencing and documentation. The focus is on providing accurate product information and reliable order fulfillment, not on marketing claims. This approach aligns with the technical nature of the equipment and the expectations of the engineers and procurement specialists who use it.

Asli
Suku Cadang OEM
Ahli
Dukungan Teknis
1 Hari
Respons Penawaran
Seluruh Dunia
Asal
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis & gambar
Respons Penawaran 1 Hari
Tim berbasis di Singapore
Stok siap tersedia & bea cukai ditangani6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.Pengiriman ke: Jakarta, Surabaya, Bandung, Medan, Batam
Jelajahi:
Tampilkan
Halaman 1 dari 2
← Sebelumnya12Berikutnya →

Tentang AEMC INSTRUMENTS

AEMC Instruments is a manufacturer of portable electrical test and measurement equipment, with a product history spanning several decades. The company's catalog covers insulation testers, ground resistance testers, micro-ohmmeters, power quality analyzers, clamp-on meters, and data loggers. These instruments are used by plant engineers, maintenance crews, and electrical contractors for commissioning, preventive maintenance, and troubleshooting of low- and medium-voltage systems. The product families supplied by 3G Electric include three-phase power quality analyzers, earth ground resistance testers, milli- and micro-ohmmeters, and megohmmeters for harsh environments. Many models carry CAT III or CAT IV safety ratings and IP-rated enclosures, making them suitable for work on distribution circuits and in outdoor or dusty industrial settings. For example, the 8336 power quality analyzer offers CAT III 1000V / CAT IV 600V safety ratings and an IP53 enclosure, with a sampling rate of 256 samples per cycle for waveform analysis. Ground resistance testers such as the 6424 and 6472 kits provide measurement ranges from 0.01 ohm to 100 kilohm, with test currents up to 250 mA and IP53 or IP65 enclosures. The 6255 and 6240 micro-ohmmeters cover low-resistance measurements from 2 microohm to 2.5 kilohm, with CAT III ratings and RS-232 or USB connectivity. The 6555 megohmmeter measures insulation resistance up to 30 teraohm at 5,000V DC, with CAT IV 1000V rating and IP54 protection. These instruments are typically used for acceptance testing of switchgear, motors, transformers, and grounding systems, as well as for power quality surveys and harmonic analysis. 3G Electric supplies the AEMC Instruments line with a focus on matching the correct model and kit configuration to the application. Because many AEMC products are available in multiple kit variants—differing in lead length, test current, and included accessories—3G Electric helps buyers select the appropriate part number based on measurement range, safety category, and environmental rating. The distributor also provides logistics support for international shipments, including documentation and handling for orders that cross borders. For technical buyers, the key selection criteria are the measurement range, test voltage or current, CAT safety rating, IP rating, and communication interface. AEMC Instruments publishes detailed specifications for each model, and 3G Electric can provide access to datasheets and manuals to support specification review. The product line is not limited to the items listed above; 3G Electric can source additional AEMC Instruments models and accessories on request. This includes current probes, test leads, software, and calibration kits. The distributor's role is to facilitate procurement of these instruments for maintenance and engineering teams, without making claims about performance beyond the published specifications. All products are supplied as new, with manufacturer warranty applicable. For buyers who need to verify compatibility with existing test procedures or safety programs, 3G Electric can assist with part number cross-referencing and documentation. The focus is on providing accurate product information and reliable order fulfillment, not on marketing claims. This approach aligns with the technical nature of the equipment and the expectations of the engineers and procurement specialists who use it.

Aplikasi Umum

  • Electrical maintenance — AEMC 6472 ground resistance tester for verifying substation grounding grids and lightning protection systems.
  • Power quality surveys — AEMC 8336 three-phase power quality analyzer for harmonic analysis and waveform capture on distribution feeders.
  • Motor and generator testing — AEMC 6555 megohmmeter for insulation resistance testing at 5,000V DC on high-voltage windings.
  • Switchgear contact resistance — AEMC 6255 micro-ohmmeter for measuring low resistance of circuit breaker contacts and busbar joints.
  • Industrial grounding systems — AEMC 6424 ground resistance tester for periodic testing of equipment grounding conductors in plants.
  • Transformer winding resistance — AEMC 6240 micro-ohmmeter for low-resistance measurements on transformer windings and tap changers.

Guides & Resources

Pertanyaan yang Sering Diajukan

Pertanyaan umum tentang AEMC INSTRUMENTS dari 3G Electric.

What is the difference between the AEMC 6472 and 6424 ground resistance testers?

The AEMC 6472 and 6424 are both digital earth ground resistance testers, but they differ in measurement range, test current, and kit contents. The 6472 measures from 0.01 ohm to 100 kilohm with a test current of ≤250 mA at 60V AC, and is available in kit configurations with 300 ft or 500 ft leads. The 6424 measures from 8 kilohm to 50 kilohm with a test current of ≤20 mA and test voltage of ±10V AC, and is supplied as a kit with 150 ft leads. Both carry CAT IV 600V safety ratings and IP65 or IP53 enclosures. Selection depends on the expected resistance range and the required lead length for the grounding system under test.

What safety category is the AEMC 8336 power quality analyzer rated for?

The AEMC 8336 three-phase power quality analyzer is rated CAT III 1000V and CAT IV 600V. This means it can be used on fixed installations such as distribution panels and busbars, as well as on the supply side of the service entrance. The analyzer has an IP53 enclosure and samples at 256 samples per cycle, which supports waveform analysis and harmonic measurement. It is intended for electrical system analysis where both safety and detailed power quality data are required.

Can the AEMC 6555 megohmmeter be used for testing high-voltage equipment?

The AEMC 6555 megohmmeter is designed for insulation resistance testing in harsh environments. It provides test voltages up to 5,000V DC and measures insulation resistance from 10 kilohm to 30 teraohm. With a CAT IV 1000V safety rating and IP54 enclosure, it is suitable for testing high-voltage motors, generators, cables, and switchgear. The instrument is typically used for preventive maintenance and acceptance testing where high test voltages are needed to detect insulation degradation.

What is the measurement range of the AEMC 6255 micro-ohmmeter?

The AEMC 6255 micro-ohmmeter measures low resistance from 5 microohm to 2.5 kilohm. It is a digital instrument with a CAT III safety rating and an IP53 enclosure. The 6255 includes an RS-232 interface for data transfer to a computer or data logger. It is used for contact resistance testing of circuit breakers, switchgear, and busbar joints, as well as for winding resistance measurements on motors and transformers.

Are AEMC ground resistance testers suitable for outdoor use?

Many AEMC ground resistance testers are built for outdoor use. For example, the 6472 kit has an IP53 enclosure, and the 6424 kit has an IP65 enclosure. These ratings indicate protection against dust and water ingress, making them suitable for field work in various weather conditions. The testers also carry CAT IV safety ratings, which allow them to be used on outdoor distribution circuits. However, the specific IP rating should be checked for each model, as it varies across the product line.

What communication interfaces are available on AEMC micro-ohmmeters?

AEMC micro-ohmmeters offer different communication interfaces depending on the model. The 6255 micro-ohmmeter includes an RS-232 interface for data transfer. The 6240 micro-ohmmeter includes USB connectivity. Both models are CAT III rated and have IP53 or IP64 enclosures. The choice between RS-232 and USB depends on the data collection system used by the maintenance team. RS-232 is often used with older data loggers, while USB is common for direct connection to laptops.