BELLOFRAM
Pertanyaan yang Sering Diajukan
Pertanyaan umum tentang BELLOFRAM dari 3G Electric.
What types of BELLOFRAM pressure regulators does 3G Electric supply?
3G Electric supplies BELLOFRAM compressed air regulators, filter-regulators, volume boosters, and electropneumatic proportional regulators. The range includes Type 50 filter-regulators with 40-micron filtration, Type 92 subminiature regulators, and electronic proportional regulators with IP65 enclosures. Port sizes range from 1/16 in NPT to 1/2 in NPT, with pressure ratings up to 152.3 psi. Models are available in aluminum with corrosion-resistant epoxy finishes and seal materials including nitrile and fluorocarbon.
Are BELLOFRAM electropneumatic proportional regulators suitable for outdoor or washdown environments?
Yes, BELLOFRAM electronic proportional regulators with IP65 rating are designed for environments where dust ingress and water jets are a concern. These models feature a 4-pin M12 connector and are available in 1/4 in and 1/2 in NPT port sizes. Maximum operating pressures range from 29 psi to 152.3 psi depending on the model. The IP65 enclosure makes them suitable for installation in industrial settings where exposure to moisture or particulate is expected.
What is the flow capacity of the BELLOFRAM Type 50 filter-regulator?
The BELLOFRAM Type 50 filter-regulator (MPN 960068005) has a flow capacity of 20 scfm at 1/4 in NPT ports. It includes a 40-micron filter element and operates within a pressure range of 0 psi to 60 psi. The body is constructed from aluminum with a corrosion-resistant epoxy finish, and the seal material is nitrile. This unit is designed for industrial air preparation where filtration and pressure regulation are required in a single assembly.
Can BELLOFRAM volume boosters be used with non-corrosive gases other than air?
BELLOFRAM volume boosters, such as the MPN 961005000, are air-operated devices designed for compressed air systems. The standard model uses nitrile seals and is intended for use with clean, dry air or inert gases compatible with the wetted materials. For gases other than air, verify compatibility with the aluminum body and nitrile seals. 3G Electric recommends consulting the manufacturer's technical documentation for specific gas compatibility before use.
What mounting options are available for BELLOFRAM subminiature regulators?
BELLOFRAM Type 92 subminiature regulators (e.g., MPN 960543000) offer through-panel mount capability. These regulators have a 1/16 in NPT female port and are constructed from aluminum with a knob adjustment. The relieving configuration allows pressure reduction with a vent to atmosphere. Panel mounting is suitable for control panels or compact assemblies where space is limited.
Does 3G Electric supply BELLOFRAM products?
Yes — 3G Electric (S) Pte. Ltd. supplies BELLOFRAM products. We stock the BELLOFRAM catalog and supply genuine factory-original products with full manufacturer warranty and technical support.
















































