COMPX ELOCK

COMPX ELOCK models primarily support proximity RFID cards as the access credential. Some models may also include keypad functionality for PIN code entry, though the specific models supplied by 3G Electric (e.g., WS-PRKP series) are card-based. The RFID technology operates at standard frequencies (typically 125 kHz or 13.56 MHz) and is compatible with common card formats. No Bluetooth or Wi-Fi connectivity is standard on these units; they are designed for standalone operation without network integration.

COMPX ELOCK locks are battery-powered, using standard alkaline batteries (e.g., 9V or AA cells, depending on the model). Battery life varies with usage frequency but typically ranges from 12 to 18 months under normal conditions (approximately 10-15 cycles per day). The locks include a low-battery indicator, usually an audible beep or LED flash, to alert users before power failure. Replacement is straightforward, requiring no special tools. For high-traffic applications, more frequent battery changes may be necessary.

Yes, COMPX ELOCK locks are designed for retrofit applications. They fit standard door preparations used for mechanical cam locks or similar cabinet locks. The body heights range from 3 1/2 inches to 8 1/2 inches, accommodating various door thicknesses. Installation typically involves removing the existing lock, inserting the ELOCK unit, and securing it with included hardware. No wiring to a central system is required, as the locks are battery-powered and standalone. However, door thickness and material (e.g., metal or wood) should be verified against the lock's specifications to ensure proper fit.

COMPX ELOCK locks are primarily designed for indoor use in dry environments. They do not carry an official IP rating for water or dust ingress. The powder-coated finish provides some resistance to corrosion and minor moisture, but these locks should not be exposed to rain, high humidity, or washdown conditions. For outdoor or wet-area applications, additional protective enclosures or alternative products with higher environmental ratings would be required. The locks are suitable for typical indoor settings like gym lockers, office cabinets, and school storage.

Access credentials for COMPX ELOCK locks are managed via the lock's onboard memory. For card-based models, users present a programmed RFID card to the reader. Programming new cards or deleting old ones is done directly at the lock using a master card or a programming sequence (e.g., a specific card swipe pattern). No software or network connection is needed. The lock can store a limited number of user cards (typically 100-500, depending on the model). For facilities requiring centralized management, these locks may not be suitable; they are best for small-scale or standalone access control.

COMPX ELOCK products are covered by the manufacturer's standard warranty, which typically covers defects in materials and workmanship for a period of one year from the date of purchase. The warranty does not cover damage from misuse, unauthorized modifications, or battery leakage. 3G Electric acts as a distributor and does not provide direct warranty service; claims should be directed to Compx International Inc. or handled through 3G Electric's returns process. Buyers should verify warranty terms at the time of purchase, as conditions may vary by region.