Eckerle

The Eckerle GO 10 condensate pump delivers a maximum flow rate of 16 liters per hour and a maximum head of 9 meters, suitable for cooling systems up to 10 kW. It operates on 230 V 50/60 Hz supply with low power consumption. The inlet connection size is ID 5/8" (approximately 16 mm), and it includes a thermal safety cutout at 120°C. Maintenance is required once a year, involving dismounting the cover and cleaning the pump chamber. The pump is designed for horizontal installation beneath the evaporator and can be integrated with building management systems via an alarm relay (NO/NC 8A 230V).

Eckerle Fluidics oil nozzles are designed for precise fuel atomization in industrial burners and heating systems. For example, the Fluidics 2.75 60° HF delivers a flow rate of 2.75 L/h at 10 bar with a 60° hollow cone spray pattern, achieving 92% efficiency. The Fluidics 1.00 80° HF provides a flow rate of 3.8 L/h at 10 bar with an 80° hollow cone angle. Both meet EN 293 standards and are suitable for light fuel oils with viscosity around 3.4 cSt. These nozzles ensure consistent combustion performance and are available in various flow rates and angles to match burner requirements.

Eckerle provides adaptation kits and pump channel kits to facilitate installation. The adaptation kits, such as D.20-D.32 and D.17-D.32, allow connection to different pipe diameters, ensuring a secure fit for various evaporator drain configurations. The RAPIDO pump channel kit includes 1x, 2x, and 4x components with a connection size of approximately 10 mm, simplifying the integration of the pump into HVAC systems. These kits are designed to reduce installation time and ensure proper sealing, and they come with data sheets (e.g., data sheet number 112756) for reference.

Eckerle condensate pumps are available with varying noise levels to suit different environments. For instance, the Touchline 10 operates at under 19 dB, making it suitable for noise-sensitive areas like offices and bedrooms. The TATTOO 5 has a noise level of approximately 36 dB, which is still relatively quiet for a condensate pump. When selecting a pump, consider the ambient noise requirements of the installation site. Lower noise models may have slightly different flow rates or head capacities, so verify specifications to ensure they meet your system's needs.

Maintenance for Eckerle condensate pumps is straightforward. The manufacturer recommends an annual cleaning of the pump chamber. To do this, dismount the cover of the pump, access the chamber, and remove any debris or sediment that may have accumulated. This prevents clogging and ensures reliable operation. No special tools are required, and the process typically takes a few minutes. Regular maintenance helps extend the pump's lifespan and maintains its performance. Always disconnect power before performing any maintenance to ensure safety.

Yes, many Eckerle condensate pumps are designed for integration with building management systems (BMS). They feature an alarm contact relay with NO/NC contacts rated at 8A 230V, which can be connected to a BMS to signal high water levels or pump faults. This allows for remote monitoring and timely maintenance alerts. Additionally, the pumps include a thermal safety cutout set at 120°C to prevent overheating. These features make Eckerle pumps suitable for commercial and industrial HVAC installations where centralized control is required.