Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

bolt

Listrik & Otomasi

Industrial electrical & automation components — circuit protection, contactors, relays, PLCs, drives and controls from trusted brands for Singapore industry.

Asli

Suku Cadang OEM

Ahli

Dukungan Teknis

1 Hari

Respons Penawaran

Seluruh Dunia

Pengiriman

Minta Penawaran Penjualan WhatsApp Penjualan Telegram

Pengiriman ke Seluruh Dunia

Pengiriman udara & laut

Lembar Data Atas Permintaan

Spesifikasi teknis & gambar

Respons Penawaran 1 Hari

Tim berbasis di Singapore

Stok siap tersedia & bea cukai ditangani6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.Pengiriman ke: Jakarta, Surabaya, Bandung, Medan, Batam

Tampilkan

Halaman 1 dari 377

Straight nylon cable grip with PG16 male thread for box connection. Accepts cord diameters from 0.23 to 0.53 inches. Rated IP66 for protection against dust and water jets. Overall length 1 11/16 inches. Suitable for sealing and strain-relieving cables entering enclosures in wet or washdown environments.

HUBBELL WIRING DEVICE-KELLEMS

HUBBELL WIRING DEVICE-KELLEMS Straight Plastic Cable Grip

MerekHUBBELL WIRING DEVICE-KELLEMS

MasukTersedia

This 1-channel cable ramp protects hoses and cables on floors in areas with vehicle traffic. Made of black rubber, it supports up to 2000 lb per axle. The T-shaped connection style allows multiple ramps to be linked for extended runs. Suitable for industrial, warehouse, and event floor applications.

ELECTRIDUCT 1-Channel Drop-Over Cable Ramp

MerekELECTRIDUCT

MasukTersedia

This yellow cable tie is designed for bundling and securing wires, cables, or hoses in outdoor environments. With a 12-inch length and 3 1/4-inch maximum bundle diameter, it suits medium-duty cable management tasks. The yellow color aids visibility for safety marking or color-coding. Pack of 100.

OEM Yellow Colored Cable Tie

MerekOEM

MasukTersedia

Straight metallic cable grip for securing and sealing cords in Class I, Division 2 hazardous locations. Connects 0.31-0.38 in diameter cord to a 1/2 in MNPT box. Aluminum body with silver finish and white color-coded grommet. NPT threading provides strain relief and environmental protection.

RACO Straight Hazardous Location Metallic Cable Grip

MerekRACO

MasukTersedia

Clear polyolefin heat shrink tubing with a 2:1 shrink ratio. Inner diameter before shrinking is 0.63 inches; length is 6 inches. Provides electrical insulation and mechanical protection for wiring and connections. Supplied in a 10-pack.

OEM APPROVED VENDOR Standard Heat Shrink Tubing

MerekOEM

MasukTersedia

Black heat shrink breakout boots with a 1.57-inch inside diameter before shrinking and 4.3-inch length. Supplied in a pack of 10. Used to seal and protect cable splices and terminations in electrical systems, providing environmental sealing against moisture, dust, and mechanical stress.

ELECTRIDUCT HSB-2-1.5-10PK Heat Shrink Breakout Boots

MerekELECTRIDUCT

MasukTersedia

Black nylon cable tie with a nominal length of 24 1/2 inches, width of 0.26 inches, and a maximum bundle diameter of 7 inches. Suitable for outdoor use, it provides secure bundling of cables, wires, and hoses in industrial and commercial settings. Supplied in a 50-pack.

TY-RAP Fine Adjustment Cable Tie

MerekTY-RAP

MasukTersedia

Stainless steel swivel nipple for connecting sections of corrosion-resistant washdown wireways. Measures 4 in wide, 4 in high, and 2 1/4 in long. Used in environments requiring resistance to high-pressure cleaning and corrosive chemicals.

HAMMOND MANUFACTURING

HAMMOND MANUFACTURING 1487CV2SS Swivel Nipple for

MerekHAMMOND MANUFACTURING

MasukTersedia

This 90° nylon cord connector accepts cord diameters from 0.63 in to 0.75 in and connects to a 3/4 in MNPT box. Rated IP66 and Class II, Division 1 & 2 for hazardous locations, it provides liquid-tight sealing and strain relief in industrial environments. The gray body and yellow color-coded grommet facilitate identification.

HUBBELL WIRING DEVICE-KELLEMS

HUBBELL WIRING DEVICE-KELLEMS 90° Plastic Cable Grip

MerekHUBBELL WIRING DEVICE-KELLEMS

MasukTersedia

This 316 stainless steel cable tie is designed for bundling and securing cables, hoses, or wires in demanding environments. With a ball lock locking style, it provides a vibration-resistant hold. The tie has a nominal length of 8 inches, a width of 0.31 inches, and a maximum bundle diameter of 2 inches. Supplied in a pack of 50, in silver color.

TY-RAP LS-7.9-200B 316 Stainless Steel Cable Tie

MerekTY-RAP

MasukTersedia

← Sebelumnya1 2 3…377 Berikutnya →