Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

bolt

Listrik & Otomasi

Industrial electrical & automation components — circuit protection, contactors, relays, PLCs, drives and controls from trusted brands for Singapore industry.

Asli

Suku Cadang OEM

Ahli

Dukungan Teknis

1 Hari

Respons Penawaran

Seluruh Dunia

Pengiriman

Minta Penawaran Penjualan WhatsApp Penjualan Telegram

Pengiriman ke Seluruh Dunia

Pengiriman udara & laut

Lembar Data Atas Permintaan

Spesifikasi teknis & gambar

Respons Penawaran 1 Hari

Tim berbasis di Singapore

Stok siap tersedia & bea cukai ditangani6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.Pengiriman ke: Jakarta, Surabaya, Bandung, Medan, Batam

Tampilkan

Halaman 284 dari 377

This heat shrink tubing kit includes 126 pieces of yellow tubing in sizes 1/8 in, 3/32 in, 3/16 in, 1/4 in, 3/8 in, and 1/2 in, each 6 in long. With a 2:1 shrink ratio and an inner diameter before shrinking of 3/8 in, it accommodates wire sizes from 0.09 in to 0.50 in. Used for insulating, protecting, and bundling wires and cables in electrical installations.

PANDUIT KP-HSTT2 Heat Shrink Tubing Kit, 126 Pieces, 2:1 Ratio, 6 in Length

MerekPANDUIT

MasukTersedia

This cold shrink tubing assortment kit includes 40 tubes with plastic cores, each 9 inches long. Made of black EPDM rubber, the tubing has a 2:1 shrink ratio and accommodates wire sizes from 0.25 to 0.88 inches. Used for insulating and sealing electrical connections without heat.

3M Cold Shrink Tubing Assortment Kit

Merek3M

MasukTersedia

90° metallic cable grip with silver aluminum body and 3/4 in MNPT connection. Accommodates cord diameters from 0.63 in to 0.75 in. Rated IP66 for liquid-tight sealing and Class I, Division 2 for hazardous locations. Suitable for securing and strain-relieving electrical cables entering enclosures in wet or industrial environments.

HUBBELL WIRING DEVICE-KELLEMS

HUBBELL WIRING DEVICE-KELLEMS NHC1037 90° Metallic Cable Grip

MerekHUBBELL WIRING DEVICE-KELLEMS

MasukTersedia

Flexible rubber cable floor cover with one channel for managing and protecting cables on floors. Accommodates cables up to 1 1/4 in diameter. Measures 6 in wide, 1 3/8 in high, and 5 ft long. Load capacity of 440 lb per axle for pedestrian and light vehicle traffic.

CHECKERS Flexible Rubber Cable Floor Cover, 5 ft Length, 1 Channel, Black

MerekCHECKERS

MasukTersedia

Cut-to-length hook-and-loop cable tie roll in black polyester. Measures 75 ft long by 2 in wide with a 70 lb tensile strength. Used for bundling and securing cables, hoses, and wires in industrial, electrical, and data-center applications.

RIP-TIE G-20-075-BK Hook-and-Loop Cable Tie Roll

MerekRIP-TIE

MasukTersedia

This 90° nylon cable grip provides a liquid-tight seal for cable entry into electrical enclosures, junction boxes, or control panels. It features a 1/2 in MNPT box connection and accepts cord diameters from 0.13 in to 0.38 in. The black nylon body is rated IP65 for protection against dust and water jets.

THOMAS-BETTS 90° Plastic Cable Grip

MerekTHOMAS-BETTS

MasukTersedia

This flexible rubber cable floor cover provides a single channel to route and protect cables in pedestrian or light-traffic areas. It measures 25 feet in length, 3 1/4 inches overall width, and 9/16 inches overall height, in a brown color. The rubber construction helps reduce trip hazards and cable wear.

ELECTRIDUCT D-2-LP-25-BN Flexible Rubber Cable Floor Cover

MerekELECTRIDUCT

MasukTersedia

Standard heat shrink tubing with 3 in inner diameter before shrinking and 1.5 in after shrinking. Orange color for circuit identification. 4 ft length. Used for insulating and protecting electrical cables and connections in industrial wiring, panel building, and maintenance.

RHINO Standard Heat Shrink Tubing

MerekRHINO

MasukTersedia

Galvanized steel pulling mesh grip with flexible eye for cable pulling through conduit or trays. Accommodates cable diameters from 0.50 to 0.62 inches. Breaking strength of 1,300 lb.

HUBBELL WIRING DEVICE-KELLEMS

HUBBELL WIRING DEVICE-KELLEMS Light Duty Pulling Mesh Grip

MerekHUBBELL WIRING DEVICE-KELLEMS

MasukTersedia

This D-LINE Mini Raceway is a half- and quarter-round cable concealer strip made of white PVC with a semi-gloss finish. It measures 1 3/16 inches wide, 9/16 inches high, and 118 inches long, and features adhesive mounting. The plastic raceway is paintable for custom color matching. Typical applications include hiding low-voltage cables along walls, baseboards, or ceilings.

D-LINE Mini Raceway

MerekD-LINE

MasukTersedia

← Sebelumnya 1…282 283 284 285 286…377 Berikutnya →