FILL-RITE

The Fill-Rite 300KTF7794 rebuild kit includes a motor shaft seal. It is designed for servicing FR300 series fuel transfer pumps, including model FR311VB. This kit is used to replace worn shaft seals during routine maintenance. It does not include other pump components such as gears, rotors, or vanes. For a complete rebuild, additional parts may be required depending on the condition of the pump. The kit is specific to the FR300 series and is not intended for other Fill-Rite pump families. Always verify the pump model and serial number before ordering.

The Fill-Rite KIT900PF1.5N meter/flange kit is used to connect a flow meter to a pump or piping system in fuel and oil transfer applications. It includes two nickel-plated 1-1/2 in NPT meter flanges, two gaskets, and eight screws. The kit provides a sealed connection between the meter and the piping, helping to prevent leaks. It is compatible with Fill-Rite meters that use 1-1/2 in NPT connections. The nickel plating offers corrosion resistance in typical fuel-handling environments. This kit is not intended for use with meters that have different connection sizes or thread types.

The Fill-Rite MMSS075RSV is a stainless steel dispense coupler with a 3/4 in hose barb and 90° outlet angle, using Viton seals. The MMNM075RPV is a non-metallic coupler with a nylon body, also 3/4 in hose barb and 90° outlet angle. The stainless steel version offers higher resistance to corrosion and is suitable for more aggressive environments, while the nylon version provides chemical resistance and is lighter. Both are designed for diesel exhaust fluid (DEF) transfer systems. Selection depends on fluid compatibility, operating pressure, and environmental conditions. Both couplers are compatible with specific Fill-Rite DEF dispensing systems.

The Fill-Rite KIT700OT flange kit is compatible with FR700V series pumps and the FR710VB model. It includes a straight discharge flange. This kit is used to connect a discharge line to the pump outlet in fuel transfer systems. The flange provides a secure, sealed connection. It is not intended for use with other Fill-Rite pump series such as FR300 or FR4200. Always confirm the pump model before ordering. The kit may require additional gaskets or seals depending on the installation.

The Fill-Rite KIT120FLG flange kit is used to connect and seal meter assemblies on fluid-handling equipment. It includes flange bolts, a meter flange, and an O-ring. It is compatible with Fill-Rite FR4200 series and model FR1211H. This kit is typically used when installing or replacing a meter on a pump or piping system. The O-ring provides a fluid-tight seal. The kit is specific to the FR4200 series and FR1211H model; it is not interchangeable with other Fill-Rite meter mounting kits. Verify compatibility with the existing meter and pump before installation.

Fill-Rite pumps and meters are commonly used with diesel, gasoline, kerosene, biodiesel, and diesel exhaust fluid (DEF). Material compatibility varies by model. Pumps with cast iron or aluminum bodies are typically used for petroleum-based fuels, while stainless steel or non-metallic components are used for DEF and other corrosive fluids. Flow meters are available in mechanical and electronic versions, with some models suitable for custody transfer. Always check the specific product specifications for fluid compatibility, flow rate, and pressure ratings. Fill-Rite does not recommend using standard fuel pumps for DEF unless the pump is specifically designed for that application.