precision_manufacturing

Permesinan & Perkakas

Machining & tooling supplies — cutting tools, inserts, abrasives and workholding for precision metalworking, fabrication and production machining.

Asli

Suku Cadang OEM

Ahli

Dukungan Teknis

1 Hari

Respons Penawaran

Seluruh Dunia

Pengiriman

Minta Penawaran Penjualan WhatsApp Penjualan Telegram

Pengiriman ke Seluruh Dunia

Pengiriman udara & laut

Lembar Data Atas Permintaan

Spesifikasi teknis & gambar

Respons Penawaran 1 Hari

Tim berbasis di Singapore

Stok siap tersedia & bea cukai ditangani6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.Pengiriman ke: Jakarta, Surabaya, Bandung, Medan, Batam

Tampilkan

Halaman 2267 dari 11571

SDS-Plus drill bit for concrete and masonry. 5/8-inch diameter, 18-inch overall length with 16-inch maximum drilling depth. For use with SDS-Plus rotary hammer drills in drilling anchor holes or rebar installations.

WESTWARD

WESTWARD SDS-Plus Concrete & Masonry Drill Bit, 5/8 in, 18 in Overall Length

MerekWESTWARD

MasukTersedia

This carbide square end mill is designed for general-purpose milling operations such as slotting, profiling, and contouring in metalworking. Suitable for use on steel, stainless steel, and cast iron, it is commonly employed in industrial machining applications within manufacturing and repair shops.

CLEVELAND

CLEVELAND C60448 General Purpose Carbide Square End Mill

MerekCLEVELAND

MasukTersedia

Spiral-point tap for threading blind or through holes in production machining. The spiral-point design pushes chips forward to prevent clogging and enable faster tapping. Suitable for use in steel, aluminum, and cast iron.

CLEVELAND

CLEVELAND General Purpose Spiral-Point Tap

MerekCLEVELAND

MasukTersedia

Class X Go (Plus) pin gauge with a diameter of 0.1823 inches and a tolerance of ±0.00004 inches. Used to verify the minimum acceptable hole size in precision manufacturing, ensuring holes are not smaller than the specified diameter. Includes a Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X Go (Plus) Pin Gauge - 0.1823 in

MerekVERMONT GAGE

MasukTersedia

Exchangeable tip spade drill bit insert with Hardslick coating. Made from super cobalt high-speed steel. Designed for 43 mm hole diameter. Used in industrial drilling and hole-making operations.

YG-1 TOOL

YG-1 TOOL Point SV170 Hardslick Coated Super Cobalt SV Point, 43 mm Hole Dia

MerekYG-1 TOOL

MasukTersedia

Class ZZ Go (Plus) plug and pin gauge with 0.2810 in diameter and 0.00020 in tolerance. Steel construction with black oxide finish. Used for Go (plus) inspection of inch-diameter holes in quality control and manufacturing to verify hole sizes within specified limits.

VERMONT GAGE

VERMONT GAGE Class ZZ Go (Plus) Plug & Pin Gauge: 0.2810 in Dia

MerekVERMONT GAGE

MasukTersedia

Carbide square end mill with 3 flutes, 5/8" cutting diameter, 1-1/4" length of cut, and 3-1/2" overall length. Designed for milling aluminum and non-ferrous materials, suitable for slotting, profiling, and finishing operations on CNC or manual mills.

OEM

OEM Carbide Square End Mill for Aluminum, 5/8" Dia, 1-1/4" LOC, 3-1/2" OAL, 3 Flute

MerekOEM

MasukTersedia

Class X Go (Plus) pin gauge with 0.8213 inch diameter and 0.00004 inch tolerance. Used for Go dimensional inspection of hole diameters in manufacturing and quality control applications. Includes Certificate of Accuracy with NIST Traceability.

VERMONT GAGE

VERMONT GAGE Class X Go (Plus) Pin Gauge - 0.8213 in

MerekVERMONT GAGE

MasukTersedia

WALTER

WALTER SRACL204D Indexable Turning & Profiling Toolholder

MerekWALTER

MasukTersedia

Hex-shank drill bit extension with set-screw design, 5 1/2 in overall length, for 7/16 in drill shank diameter. Used with auger drills to extend reach for deep hole drilling in wood framing, electrical conduit routing, and plumbing installations.

MILWAUKEE

MILWAUKEE Set-Screw Hex-Shank Drill Bit Extension 48-28-4001

MerekMILWAUKEE

MasukTersedia

← Sebelumnya 1…2265 2266 2267 2268 2269…11571 Berikutnya →