MILLER ELECTRIC

The Miller Electric T94-R PAPR system is a powered air-purifying respirator designed for welding, grinding, and other industrial applications where respiratory protection is required. It consists of a blower unit, breathing tube, belt, harness, and filter components. The system delivers filtered air to the user's breathing zone. Accessories such as the nylon shoulder straps (MPN 235680) and accessory belt (MPN 235679) help secure the unit during use. The T94-R series includes particulate filters and vapor cartridges, as well as prefilters that extend filter service life. Replacement parts like the breathing tube assembly (MPN 261704) and O-ring (MPN 237452) are available for maintenance.

The Miller LPR-100 reusable respirator compatible filter (MPN 294963) is NIOSH P100-rated. P100 filters are designed to capture at least 99.97% of airborne particles, including oil-based and non-oil-based particulates. The filter is magenta in color and uses a snap-in gasket connection for attachment to the LPR-100 series respirators. It is intended for use in industrial environments where particulate filtration is required. This filter is a component of the LPR-100 reusable respirator system, which is separate from the T94-R PAPR series.

The Miller PAPR 2 series prefilter (MPN 235674) is a disposable component that captures larger airborne particles before they reach the main particulate or vapor filter. It is supplied in a pack of six. By trapping coarse debris, the prefilter helps extend the service life of the primary filter. It is designed for use with Miller powered air-purifying respirators that accept PAPR 2 series filters. The prefilter is white and measures approximately 1/4 inch in height. It is a consumable item that requires periodic replacement to maintain airflow and filtration efficiency.

The Miller T94-R PAPR breathing tube assembly (MPN 261704) is a plastic tube that delivers air from the PAPR blower to the helmet or facepiece. It is compatible with T94-R and T94i-R models. The assembly includes the breathing tube itself. A separate rubber O-ring (MPN 237452) is available as a replacement seal for use with Mfr. No. 264573 breathing tubes. The O-ring is 7 inches in length and helps maintain a secure connection between components. These parts are genuine Miller Electric components for powered air-purifying respirator systems.

The Miller PAPR flowmeter (SKU 453F44) is an accessory for Miller PAPR blower systems. It is used to measure and regulate airflow to ensure consistent air delivery to the user's breathing zone. This is important for maintaining the required level of respiratory protection in applications such as welding, grinding, and industrial environments. The flowmeter is part of the T94-R series and has dimensions of approximately 3 inches by 2 inches by 7 inches. It is a diagnostic or calibration tool that helps verify that the PAPR system is operating within specified airflow parameters.

The Miller Electric filter cover (MPN 235677) is a component for Miller PAPR systems, specifically designed for use with Mfr. No. 264573. It protects the particulate filter and vapor cartridge from physical damage and debris, helping to ensure clean airflow in environments requiring respiratory protection. The cover is part of the T94-R series and measures approximately 2 inches in height and 8-1/2 inches in length. It is a replacement part that may need to be replaced if damaged or worn. This cover is used in conjunction with the filter and cartridge assembly to maintain system integrity.