Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
⌕
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar

MITEE-BITE PRODUCTS INC

MITEE-BITE PRODUCTS INC, founded in the United States, is a manufacturer of workholding and fixture components for machining operations. The company's product line includes inside-diameter (ID) clamps, adjustable fixture clamps, vise jaw stops, toe stops, collet wrenches, and locating rails. These components are used in milling, turning, grinding, and inspection setups where precise part location and secure clamping are required. MITEE-BITE clamps are typically constructed from steel with machinable widths, serrated or smooth faces, and are available in both inch and metric bolt thread sizes. The ID Xpansion Clamps and Side-Loc Xpansion Clamps are designed for lathe workholding, expanding against the bore of a workpiece to hold it from the inside. Adjustable fixture clamps offer a clamping range from centerline, allowing for variation in part thickness. Vise jaw stops and multi-fixture stops provide repeatable part location on vises and fixture plates. Collet wrenches are offered for 16C collets. 3G Electric supplies over 250 SKUs of MITEE-BITE products, covering the full range of clamp types, sizes, and mounting configurations. The inventory includes both standard and less common variants, such as stepped-end toe stops with different bolt sizes and adjustable clamps with specific clamping ranges. This breadth allows maintenance managers and procurement specialists to source replacement or new workholding components without cross-referencing multiple suppliers. The products are compatible with common machine tool interfaces, including T-slots, tapped holes, and vise jaws. No special certifications or industry approvals are claimed beyond the manufacturer's standard quality control. The components are intended for general industrial machining environments where dimensional accuracy and clamping force consistency are required.

Genuine
OEM Parts
Expert
Tech Support
1 Hari
Respons Penawaran
Seluruh Dunia
Asal
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis & gambar
Respons Penawaran 1 Hari
Tim berbasis di Singapore
Stok siap tersedia & bea cukai ditangani6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.Pengiriman ke: Jakarta, Surabaya, Bandung, Medan, Batam
Jelajahi:
Tampilkan
Halaman 1 dari 6
← Sebelumnya123…6Berikutnya →

Tentang MITEE-BITE PRODUCTS INC

MITEE-BITE PRODUCTS INC, founded in the United States, is a manufacturer of workholding and fixture components for machining operations. The company's product line includes inside-diameter (ID) clamps, adjustable fixture clamps, vise jaw stops, toe stops, collet wrenches, and locating rails. These components are used in milling, turning, grinding, and inspection setups where precise part location and secure clamping are required. MITEE-BITE clamps are typically constructed from steel with machinable widths, serrated or smooth faces, and are available in both inch and metric bolt thread sizes. The ID Xpansion Clamps and Side-Loc Xpansion Clamps are designed for lathe workholding, expanding against the bore of a workpiece to hold it from the inside. Adjustable fixture clamps offer a clamping range from centerline, allowing for variation in part thickness. Vise jaw stops and multi-fixture stops provide repeatable part location on vises and fixture plates. Collet wrenches are offered for 16C collets. 3G Electric supplies over 250 SKUs of MITEE-BITE products, covering the full range of clamp types, sizes, and mounting configurations. The inventory includes both standard and less common variants, such as stepped-end toe stops with different bolt sizes and adjustable clamps with specific clamping ranges. This breadth allows maintenance managers and procurement specialists to source replacement or new workholding components without cross-referencing multiple suppliers. The products are compatible with common machine tool interfaces, including T-slots, tapped holes, and vise jaws. No special certifications or industry approvals are claimed beyond the manufacturer's standard quality control. The components are intended for general industrial machining environments where dimensional accuracy and clamping force consistency are required.

Aplikasi Umum

  • CNC lathe workholding — MITEE-BITE ID Xpansion Clamps for internal gripping of thin-wall tubes
  • Fixture plate setup — MITEE-BITE adjustable fixture clamps for securing irregular castings on a milling machine
  • Vise workholding — MITEE-BITE TalonGrip Vise Jaw Stops for repeatable part location on a Kurt vise
  • Toolroom inspection — MITEE-BITE multi-fixture stops for positioning parts on a granite surface plate
  • Collet chuck maintenance — MITEE-BITE 16C collet wrench for tightening collets on a Hardinge lathe
  • Turning operations — MITEE-BITE Side-Loc Xpansion Clamps for holding ring-shaped parts on a vertical lathe

Pertanyaan yang Sering Diajukan

Pertanyaan umum tentang MITEE-BITE PRODUCTS INC dari 3G Electric.

What is the difference between MITEE-BITE ID Xpansion Clamps and Side-Loc Xpansion Clamps?

ID Xpansion Clamps are actuated by a bolt from the top or side of the clamp, expanding the clamp against the inside diameter of a workpiece. Side-Loc Xpansion Clamps are side-actuated, meaning the bolt is accessed from the side of the clamp, which can be advantageous in confined spaces or when the top of the workpiece must remain clear. Both types are used for internal gripping on lathes, but the actuation direction differs.

What bolt thread sizes are available for MITEE-BITE adjustable fixture clamps?

MITEE-BITE adjustable fixture clamps are available with bolt thread sizes including M5, M6, M8, M10, 5/16", 3/8", 1/2", and 5/8". The specific thread size depends on the clamp model and clamping range. For example, the MPN 90115 clamp uses a 5/16" bolt, while the MPN 90145 uses a 1/2" bolt. Always verify the bolt thread size against your fixture plate or machine table.

Can MITEE-BITE TalonGrip Vise Jaw Stops be used on any vise brand?

Yes, TalonGrip Vise Jaw Stops are designed to be mounted on standard vise jaws using the M5 mounting hole. They are compatible with most vise brands that have a flat jaw face and accept M5 screws. The stop provides a repeatable reference for part positioning along the jaw length. Ensure the vise jaw material can be drilled and tapped for the M5 hole if not pre-drilled.

What is the clamping range from centerline for MITEE-BITE adjustable fixture clamps?

The clamping range from centerline varies by model. For example, the MPN 90115 has a range of 0.4724 in to 0.6693 in, while the MPN 90145 ranges from 1.1811 in to 1.378 in. This measurement indicates the distance from the center of the mounting bolt to the clamping surface. Select a clamp where the workpiece thickness falls within this range for proper clamping force.

Are MITEE-BITE collet wrenches specific to 16C collets only?

Yes, the MITEE-BITE collet wrench with MPN 1016C is designed specifically for 16C collets. It is not interchangeable with other collet sizes such as 5C or R8. The wrench provides the correct hex or pin configuration to tighten and loosen 16C collets in a collet chuck or closer. For other collet sizes, a different wrench model would be required.

Does 3G Electric supply MITEE-BITE PRODUCTS INC products?

Yes — 3G Electric (S) Pte. Ltd. supplies MITEE-BITE PRODUCTS INC products. We stock the MITEE-BITE PRODUCTS INC catalog and supply genuine factory-original products with full manufacturer warranty and technical support.