settings

Transmisi Daya

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Asli

Suku Cadang OEM

Ahli

Dukungan Teknis

1 Hari

Respons Penawaran

Seluruh Dunia

Pengiriman

Minta Penawaran Penjualan WhatsApp Penjualan Telegram

Pengiriman ke Seluruh Dunia

Pengiriman udara & laut

Lembar Data Atas Permintaan

Spesifikasi teknis & gambar

Respons Penawaran 1 Hari

Tim berbasis di Singapore

Stok siap tersedia & bea cukai ditangani6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.Pengiriman ke: Jakarta, Surabaya, Bandung, Medan, Batam

Tampilkan

Halaman 1016 dari 4547

This 1-piece round clamp-on shaft collar is made of carbon steel and has a 5/8 in bore diameter for inch-size shafts. It is used to position and secure components on a shaft, preventing axial movement in power transmission and industrial machinery applications.

RULAND MANUFACTURING

RULAND MANUFACTURING CL-10-F Steel Shaft Collar, 5/8 in Bore, Clamp-On

MerekRULAND MANUFACTURING

MasukTersedia

This is a 2-piece, round, clamp-on aluminum shaft collar with a 70 mm bore diameter and 19 mm collar width. It is used to position, secure, or limit axial movement on a 70 mm shaft in industrial machinery, conveyor systems, and automation equipment.

RULAND MANUFACTURING

RULAND MANUFACTURING MSP-70-A Aluminum Shaft Collar, 70 mm Bore, 19 mm Width

MerekRULAND MANUFACTURING

MasukTersedia

Cast iron 2-bolt flange housing with a 1 9/16 in cylindrical bore. Set screws secure the shaft; lubricated with NLGI #2 equivalent grease. Mounting bolt size is 1/2 in. Suitable for supporting rotating shafts in conveyors, fans, and material handling equipment.

TRITAN

TRITAN UCFL208-25 General Purpose Flange-Mount Ball Bearing

MerekTRITAN

MasukTersedia

LEESON

LEESON M1135147.00 Parallel Shaft DC Gearmotor

MerekLEESON

MasukTersedia

Square, double-sealed, non-flanged cylindrical disc bearing with a straight outer ring and 2.312 in bore. Rated for a maximum speed of 300 RPM. Suitable for use in agricultural implements such as disc harrows and tillers where protection against contaminants is required.

NTN

NTN DC216TTR2 Cylindrical Disc Bearing

MerekNTN

MasukTersedia

This flange-mount spherical roller bearing features a 4 7/16 in cylindrical bore and a cast iron, not-split housing. It uses set screws for shaft mounting and is pre-lubricated with LC-2 Lithium Complex Grease. The bearing requires a 7/8 in mounting bolt and is designed for inch-system applications. Typical uses include supporting heavy radial and moderate thrust loads in industrial equipment such as conveyors, fans, and pumps.

MOLINE BEARING

MOLINE BEARING Flange-Mount Spherical Roller Bearing

MerekMOLINE BEARING

MasukTersedia

D-1 attachment link for ANSI standard roller chains, size 60, single strand, plain finish. Sold in a 5-pack. Used to add conveying or positioning features to roller chain assemblies in applications such as material handling and packaging.

TSUBAKI

TSUBAKI Attachment Link D-1 60 Single Strand Plain 5 PK

MerekTSUBAKI

MasukTersedia

Metric round clamp-on shaft collar with 35 mm bore diameter and 15 mm collar width. Two-piece steel construction allows installation or repositioning without shaft disassembly. Used to position, secure, or limit axial movement of components on shafts in industrial machinery, conveyors, and automation systems.

RULAND MANUFACTURING

RULAND MANUFACTURING MSP-35-F Steel Shaft Collar

MerekRULAND MANUFACTURING

MasukTersedia

This steel balanced shaft collar features a two-piece, round, clamp-on design with a 2 1/2 inch bore diameter. Made from 1215 steel, it provides axial positioning and clamping force on rotating shafts. Suitable for applications requiring reduced vibration and improved rotational balance at high speeds.

RULAND MANUFACTURING

RULAND MANUFACTURING Steel Balanced Shaft Collar

MerekRULAND MANUFACTURING

MasukTersedia

This 2-piece, round, clamp-on shaft collar is made from 6061 aluminum for corrosion resistance and lightweight strength. It has a 2-inch bore diameter and is used to secure components on a shaft, prevent axial movement, or serve as a mechanical stop in industrial machinery such as conveyors, packaging equipment, and automation systems.

CLIMAX METAL PRODUCTS

CLIMAX METAL PRODUCTS 2C-200-A Aluminum Shaft Collar

MerekCLIMAX METAL PRODUCTS

MasukTersedia

← Sebelumnya 1…1014 1015 1016 1017 1018…4547 Berikutnya →