settings

Transmisi Daya

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Asli

Suku Cadang OEM

Ahli

Dukungan Teknis

1 Hari

Respons Penawaran

Seluruh Dunia

Pengiriman

Minta Penawaran Penjualan WhatsApp Penjualan Telegram

Pengiriman ke Seluruh Dunia

Pengiriman udara & laut

Lembar Data Atas Permintaan

Spesifikasi teknis & gambar

Respons Penawaran 1 Hari

Tim berbasis di Singapore

Stok siap tersedia & bea cukai ditangani6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.Pengiriman ke: Jakarta, Surabaya, Bandung, Medan, Batam

Tampilkan

Halaman 1476 dari 4547

Flange hub with finished bore for close-coupled mounting in power transmission systems. Round keyed bore, powdered metal construction. Maximum speed 7600 RPM, outside diameter 3 1/4 in. Suitable for connecting shafts in pumps, compressors, conveyors, and gearboxes.

MASTERDRIVE

MASTERDRIVE 5S-1-3/16 Finished Bore Close-Coupled Flange, 3 1/4 in OD, 7600 RPM

MerekMASTERDRIVE

MasukTersedia

This bronze sleeve bearing features a 3/4 in bore, 1 in OD, and 3 1/2 in length, suitable for low-speed, high-load applications such as conveyors, agricultural equipment, and industrial machinery. It operates in temperatures from -450°F to 500°F and is sold in a 3-pack.

BUNTING BEARINGS

BUNTING BEARINGS General Purpose Metallic Sleeve Bearing

MerekBUNTING BEARINGS

MasukTersedia

This fixed-bore timing pulley with hub is designed for HTD curvilinear timing belt sections. It features 19 teeth and a 9 mm belt width, with a clear anodized finish. Suitable for synchronous belt drive systems requiring precise motion transfer without slippage.

Dayton

Dayton 19-5M09-6FA6 HTD Section Fixed-Bore Timing Pulley with Hub

MerekDayton

MasukTersedia

Inch-system tapered roller bearing cone with 3 in bore, 5.55 in outside diameter, 2.169 in cone width, and 5.09 in inside diameter. Features a carbon steel ring and chrome steel cage. Designed for use with cup 6535 in applications supporting combined radial and axial loads.

NTN

NTN 6575 Tapered Roller Bearing Cone

MerekNTN

MasukTersedia

This variable speed belt features a cogged construction for reduced heat buildup and improved flexibility. With a top width of 1 1/2 in, outside length of 35 in, and groove angle of 26°, it is suited for adjustable speed drives in industrial machinery such as conveyors, pumps, and machine tools.

Dayton

Dayton Variable Speed Belt

MerekDayton

MasukTersedia

This fixed rod end features a stainless steel body with a male threaded shank (1/2"-13, right hand) and a plain bore. It is used in mechanical linkage systems to connect a threaded rod to a fixed pivot point, providing corrosion resistance and precise alignment in industrial machinery, automation, and material handling applications.

KEN FORGING

KEN FORGING Stainless Steel Male Threaded Fixed Rod End

MerekKEN FORGING

MasukTersedia

Stainless steel wear sleeve for protecting rotating shafts from wear and seal damage. Fits shaft diameters from 36.45 mm to 36.6 mm. Overall width 12.7 mm, width on shaft 9.53 mm. Used in pumps, gearboxes, and conveyors.

SKF

SKF 99144 Stainless Steel Wear Sleeve

MerekSKF

MasukTersedia

Steel clevis connector for terminating or joining leaf chain ends in industrial lifting, conveying, and tensioning systems. Fits 3x4 leaf chain with 5/8 in pitch and 0.8 in overall width.

TRITAN

TRITAN BL534 Leaf Chain Clevis Connector, 3x4, 5/8 in Pitch, 0.8 in Width, Steel

MerekTRITAN

MasukTersedia

This zero-backlash curved jaw coupling hub is made of aluminum with a 2 1/4 in outside diameter. Designed for inch-series shafts, it accommodates minor misalignment while providing precise torque transmission. Commonly used in pumps, gearboxes, and conveyor systems.

RULAND MANUFACTURING

RULAND MANUFACTURING Zero-Backlash Curved Jaw Coupling Hub

MerekRULAND MANUFACTURING

MasukTersedia

This clamp-on Oldham coupling hub is designed for round shafts in motion control systems. It accommodates 0.5° angular misalignment and 0.008 in axial motion, suitable for applications requiring precise torque transmission and misalignment compensation.

RULAND MANUFACTURING

RULAND MANUFACTURING Clamp-On Oldham Coupling Hub for Round Shafts, OCT36-8-A

MerekRULAND MANUFACTURING

MasukTersedia

← Sebelumnya 1…1474 1475 1476 1477 1478…4547 Berikutnya →