settings

Transmisi Daya

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Asli

Suku Cadang OEM

Ahli

Dukungan Teknis

1 Hari

Respons Penawaran

Seluruh Dunia

Pengiriman

Minta Penawaran Penjualan WhatsApp Penjualan Telegram

Pengiriman ke Seluruh Dunia

Pengiriman udara & laut

Lembar Data Atas Permintaan

Spesifikasi teknis & gambar

Respons Penawaran 1 Hari

Tim berbasis di Singapore

Stok siap tersedia & bea cukai ditangani6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.Pengiriman ke: Jakarta, Surabaya, Bandung, Medan, Batam

Tampilkan

Halaman 875 dari 4547

This set screw rigid shaft coupling has a 1 1/4 in bore diameter for both bores, round shape, and inch dimensions. It connects two shafts of equal diameter for torque transmission in power transmission systems such as conveyors, pumps, and gearboxes where precise alignment and zero backlash are required.

CLIMAX METAL PRODUCTS

CLIMAX METAL PRODUCTS RC-125-S Set Screw Rigid Shaft Coupling

MerekCLIMAX METAL PRODUCTS

MasukTersedia

Metric spur gear with standard hub, 60 teeth, 8 mm bore diameter, 20° pressure angle, module m 1. Made from Duracon (M90-44) with plain bore. Precision class JIS N12 (JIS B1702-1:1998), gear shape S9. Used in power transmission and motion control applications such as conveyors and packaging machinery.

KHK GEARS

KHK GEARS Metric Spur Gear with Standard Hub

MerekKHK GEARS

MasukTersedia

This flat idler pulley without flange is used to guide or tension flat belts and chains in material handling systems. It features a 4.25 in outer diameter, 1 1/8 in bore, and 2 in face width. Constructed of cast iron with a ball bearing, it provides smooth rotation under load.

OEM

OEM Flat Idler Pulley without Flange

MerekOEM

MasukTersedia

This fixed-bore timing pulley is designed for use with GT timing belts and accommodates a 9 mm belt width. It features a hub and a plain finish. Suitable for power transmission systems requiring synchronized motion.

Dayton

Dayton GT Section Fixed-Bore Timing Pulley with Hub

MerekDayton

MasukTersedia

This plain-bore timing pulley with hub is designed for synchronous belt drive systems requiring precise motion transfer. It features an 8 mm pitch, 32 teeth, and a 1/2 in bore diameter, accommodating a 50 mm belt width. Suitable for applications such as industrial machinery, conveyors, and automation equipment.

CONTINENTAL

CONTINENTAL SilentSync Plain-Bore Timing Pulley with Hub

MerekCONTINENTAL

MasukTersedia

Single-strand offset link for ANSI standard roller chains. Pitch 1 1/2 in, roller diameter 7/8 in. Used to connect or repair roller chains in industrial power transmission systems such as conveyors and machinery.

TSUBAKI

TSUBAKI 120 OFFSET LINK Offset Link for ANSI Standard Chains

MerekTSUBAKI

MasukTersedia

This B section V-belt is constructed from polyester for power transmission applications. It has a top width of 21/32 in, a thickness of 13/32 in, and an outside length of 169 in. Commonly used in industrial machinery such as pumps, compressors, and conveyors for torque transfer and vibration reduction.

Dayton

Dayton B166 B Section V-Belt

MerekDayton

MasukTersedia

This clamp-on beam shaft coupling accommodates 3° angular misalignment and is made of aluminum. It features a 12 mm bore diameter 1 and is designed for general purpose motion control applications requiring precise shaft alignment and torque transmission.

RULAND MANUFACTURING

RULAND MANUFACTURING FCMR32-12-8-A General Purpose Clamp-On Beam Shaft Coupling

MerekRULAND MANUFACTURING

MasukTersedia

This lubricated general purpose metallic sleeve bearing is made from SAE 841 bronze. It has an 8 mm bore, 11 mm outer diameter, and 12 mm length, with a maximum PV rating of 49,938 lb/sq in-fpm. Suitable for rotating or oscillating shaft applications in industrial machinery, conveyors, and automotive components. Sold in packs of 10.

OILITE

OILITE SAE 841 Bronze Sleeve Bearing

MerekOILITE

MasukTersedia

Cast-iron wedge V-belt pulley with bushed bore, 5 grooves, and 11.8 in outside diameter. Designed for 5V or 5VX belt sections with a pitch diameter of 11.8 in (5V). Used in power transmission systems to transfer rotational motion between shafts via V-belts.

OEM

OEM Bushed-Bore Cast-Iron Wedge V-Belt Pulley 55V1180E

MerekOEM

MasukTersedia

← Sebelumnya 1…873 874 875 876 877…4547 Berikutnya →