
WEBSTONE
Pertanyaan yang Sering Diajukan
Pertanyaan umum tentang WEBSTONE dari 3G Electric.
What pressure ratings are available for WEBSTONE brass ball valves?
WEBSTONE brass ball valves, such as the rotating flanged ball valve (MPN 51416HV) and the boiler drain valve (MPN 50672W), are rated for a maximum operating pressure of 600 psi. Tankless water heater service valves, like MPN 44443WPR, are rated for 150 psi. Always verify the specific pressure rating for the exact model, as ratings vary by product family and connection type.
What connection types are offered on WEBSTONE boiler installation kits?
WEBSTONE boiler installation kits are available with sweat (solder) connections or threaded female iron pipe (FIP) connections. For example, the 4FK5-CH kit uses sweat connections, while the 4FK4-WIF kit uses threaded FIP. The kits include tee manifolds with valves and purge drains, and some include insulated flexible piping lengths for easier installation.
Are WEBSTONE purge valves suitable for boiler drain applications?
Yes, WEBSTONE boiler drain valves, such as the 1/2-inch brass purge valve (MPN 50672W), are designed for boiler drain and purge applications. They feature a full-port ball port for high flow, an aluminum lever handle, and include hi-flow hose drains to facilitate system flushing and maintenance. The 600 psi rating makes them suitable for most hydronic heating systems.
What handle options are available on WEBSTONE ball valves?
WEBSTONE ball valves come with either a lever handle or a tee handle, depending on the model. For instance, the 1 1/2-inch rotating flanged ball valve (MPN 51416HV) has a steel lever handle, while the 1 1/4-inch manual two-way ball valve (MPN 51405HV) uses a tee handle. Handle material is typically steel or aluminum.
Do WEBSTONE installation kits include all necessary components for boiler setup?
WEBSTONE boiler installation kits, such as the 4FK5-CH and 5FK5-CH, include a tee manifold with valves and purge drains. Some kits, like the 4FK4-WIF, also include insulated 12-inch flexible piping lengths. However, the kits do not include the boiler itself or external piping beyond the manifold. They are designed to simplify the connection between the boiler and the system piping.
What is the typical application for WEBSTONE tankless water heater service valves?
WEBSTONE tankless water heater service valves, like the 3/4-inch brass valve (MPN 44443WPR), are used to isolate and service tankless water heaters. They feature FIP x FIP connections, a steel handle, and include hi-flow hose drains for flushing the heat exchanger. The 150 psi rating is appropriate for residential and light commercial water heater installations.
















































