Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Tee Pipa Logam: 1/2 in x 1/2 in x 3/8 in, Berulir x Berulir x Berulir - Low-Pressure Threaded Pipe Fittings
ANVILLow-Pressure Threaded Pipe Fittings

ANVIL Tee Pipa Logam: 1/2 in x 1/2 in x 3/8 in, Berulir x Berulir x Berulir

Tee Pipa Logam ANVIL berukuran 1/2 in x 1/2 in x 3/8 in termasuk dalam kategori Low-Pressure Threaded Pipe Fittings. Fitting ini memiliki konfigurasi Threaded x Threaded x Threaded, Class 125, terbuat dari Cast Iron…

SKU 3G-OTH-653813

Merek
ANVIL
Item
Tee Pipa Logam: 1/2 in x 1/2 in x 3/8 in, Berulir x Berulir x Berulir
Kategori
Low-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0300035003
Type
Threaded x Threaded x Threaded, Class 125, Cast Iron
Maximum Operating Pressure
175 psi @ -20° to 150°F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Tee Pipa Logam ANVIL berukuran 1/2 in x 1/2 in x 3/8 in termasuk dalam kategori Low-Pressure Threaded Pipe Fittings. Fitting ini memiliki konfigurasi Threaded x Threaded x Threaded, Class 125, terbuat dari Cast Iron, dengan Maximum Operating Pressure 175 psi @ -20° hingga 150°F. Produk ini cocok untuk aplikasi perpipaan bertekanan rendah di berbagai sektor industri di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa Tee Pipa ANVIL 1/2 in x 1/2 in x 3/8 in digunakan?

Tee Pipa ANVIL ini digunakan untuk membuat percabangan pada sistem perpipaan bertekanan rendah. Dengan ukuran 1/2 in x 1/2 in x 3/8 in dan konfigurasi Threaded x Threaded x Threaded, fitting ini cocok untuk menyambung tiga pipa dalam satu titik distribusi.

Apa spesifikasi teknis Tee Pipa ANVIL 0300035003?

Spesifikasi teknis Tee Pipa ANVIL dengan Manufacturer Part Number 0300035003 meliputi: tipe Threaded x Threaded x Threaded, Class 125, material Cast Iron, dan Maximum Operating Pressure 175 psi pada rentang suhu -20° hingga 150°F.

Di mana beli Tee Pipa ANVIL 1/2 in x 1/2 in x 3/8 in di Indonesia?

Anda dapat membeli Tee Pipa ANVIL ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih Tee Pipa ANVIL yang tepat?

Pilih Tee Pipa ANVIL berdasarkan ukuran pipa yang akan disambung, tekanan operasi, dan material. Untuk aplikasi bertekanan rendah, pastikan fitting memiliki rating Class 125 dan Maximum Operating Pressure 175 psi sesuai spesifikasi produk ini.

ANVIL Produk

3G Electric memasok ANVIL low-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This low-pressure threaded pipe tee features a 1-inch main run with two 3/4-inch branch outlets, all with female NPT threads. Made of Class 125 cast iron, it is rated for 175 psi at temperatures from -20°F to 150°F. Used to split or combine flow in water, air, or steam piping systems
ANVIL
This low-pressure threaded pipe tee features a 1-inch main run with two 3/4-inch branch outlets, all with female NPT threads. Made of Class 125 cast iron, it is rated for 175 psi at temperatures from -20°F to 150°F. Used to split or combine flow in water, air, or steam piping systems
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
ANVIL
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
Cast iron Class 125 threaded tee with reducing branch. Used to branch or combine flow in low-pressure water, air, or steam piping systems. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Cast iron Class 125 threaded tee with reducing branch. Used to branch or combine flow in low-pressure water, air, or steam piping systems. Maximum operating pressure 175 psi at -20° to 150°F
This cast iron pipe tee features three 1/4 in threaded ends for splitting or combining flow in low-pressure piping systems. Rated Class 125 with a maximum operating pressure of 175 psi at -20° to 150°F, it is suitable for water, air, or steam lines in industrial plumbing and HVAC applications
ANVIL
This cast iron pipe tee features three 1/4 in threaded ends for splitting or combining flow in low-pressure piping systems. Rated Class 125 with a maximum operating pressure of 175 psi at -20° to 150°F, it is suitable for water, air, or steam lines in industrial plumbing and HVAC applications
Threaded x Threaded x Threaded, Class 125, cast iron tee fitting. Maximum operating pressure 175 psi @ -20° to 150°F. Used to branch or combine flow in low-pressure water, steam, or gas piping systems
ANVIL
Threaded x Threaded x Threaded, Class 125, cast iron tee fitting. Maximum operating pressure 175 psi @ -20° to 150°F. Used to branch or combine flow in low-pressure water, steam, or gas piping systems
This low-pressure threaded pipe elbow features a 45° angle for gradual directional changes in piping systems. With Threaded x Threaded connections and Class 125 rating, it is suitable for applications requiring a maximum operating pressure of 175 psi at 150°F
ANVIL
This low-pressure threaded pipe elbow features a 45° angle for gradual directional changes in piping systems. With Threaded x Threaded connections and Class 125 rating, it is suitable for applications requiring a maximum operating pressure of 175 psi at 150°F

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Threaded x threaded straight pipe fitting for low-pressure applications. Connects 1-1/4 in to 1/2 in pipe sizes. Rated Class 125 with maximum operating pressure of 175 psi at 150° F. Suitable for use in industrial plumbing, HVAC, and process piping systems
ANVIL
Threaded x threaded straight pipe fitting for low-pressure applications. Connects 1-1/4 in to 1/2 in pipe sizes. Rated Class 125 with maximum operating pressure of 175 psi at 150° F. Suitable for use in industrial plumbing, HVAC, and process piping systems
Threaded x Threaded straight reducer for low-pressure piping systems. Class 125, rated 175 psi @ 150° F. Connects 2 in to 1 1/4 in pipe. Used in industrial plumbing, HVAC, and process applications
ANVIL
Threaded x Threaded straight reducer for low-pressure piping systems. Class 125, rated 175 psi @ 150° F. Connects 2 in to 1 1/4 in pipe. Used in industrial plumbing, HVAC, and process applications
Threaded x Threaded x Threaded tee for branching or combining flow in low-pressure piping systems. Suitable for water, air, or steam lines in industrial, HVAC, and plumbing applications. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Threaded x Threaded x Threaded tee for branching or combining flow in low-pressure piping systems. Suitable for water, air, or steam lines in industrial, HVAC, and plumbing applications. Maximum operating pressure 175 psi at -20° to 150°F
Threaded x Threaded x Threaded, Class 125, cast iron. Maximum operating pressure 175 psi @ -20° to 150°F. Used to connect three threaded pipes in low-pressure water or air lines
ANVIL
Threaded x Threaded x Threaded, Class 125, cast iron. Maximum operating pressure 175 psi @ -20° to 150°F. Used to connect three threaded pipes in low-pressure water or air lines
Threaded x Threaded 90° elbow for low-pressure piping systems. Rated Class 125 with maximum operating pressure 175 psi at 150° F. Used to change direction in water, air, or steam lines
ANVIL
Threaded x Threaded 90° elbow for low-pressure piping systems. Rated Class 125 with maximum operating pressure 175 psi at 150° F. Used to change direction in water, air, or steam lines
This threaded plug is used to seal open ends in low-pressure piping systems, such as water, air, or steam lines. It is commonly applied in industrial plumbing, HVAC, and process piping to cap unused ports or close pipe ends during maintenance or system modifications. Constructed from malleable iron with NPT threads, it is rated for a maximum operating pressure of 285 psi
ANVIL
This threaded plug is used to seal open ends in low-pressure piping systems, such as water, air, or steam lines. It is commonly applied in industrial plumbing, HVAC, and process piping to cap unused ports or close pipe ends during maintenance or system modifications. Constructed from malleable iron with NPT threads, it is rated for a maximum operating pressure of 285 psi
Threaded x Threaded x Threaded pipe tee with 1 1/4 in x 1 1/4 in x 1/2 in configuration. Class 125 cast iron construction rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
ANVIL
Threaded x Threaded x Threaded pipe tee with 1 1/4 in x 1 1/4 in x 1/2 in configuration. Class 125 cast iron construction rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
Low-pressure threaded pipe tee with reducing branch, cast iron construction, Class 125. Threaded x threaded x threaded connections for use in water, steam, or gas piping systems. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Low-pressure threaded pipe tee with reducing branch, cast iron construction, Class 125. Threaded x threaded x threaded connections for use in water, steam, or gas piping systems. Maximum operating pressure 175 psi at -20° to 150°F