Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Tee Pipa Logam: 1 in x 3/4 in x 3/4 in, Berulir x Berulir x Berulir - Low-Pressure Threaded Pipe Fittings
ANVILLow-Pressure Threaded Pipe Fittings

ANVIL Tee Pipa Logam: 1 in x 3/4 in x 3/4 in, Berulir x Berulir x Berulir

ANVIL menghadirkan Metal Pipe Tee berukuran 1 in x 3/4 in x 3/4 in, termasuk dalam kategori Low-Pressure Threaded Pipe Fittings. Fitting ini memiliki konfigurasi Threaded x Threaded x Threaded, Class 125, terbuat…

SKU 3G-OTH-653951

Merek
ANVIL
Item
Tee Pipa Logam: 1 in x 3/4 in x 3/4 in, Berulir x Berulir x Berulir
Kategori
Low-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0300037801
Type
Threaded x Threaded x Threaded, Class 125, Cast Iron
Maximum Operating Pressure
175 psi @ -20° to 150°F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ANVIL menghadirkan Metal Pipe Tee berukuran 1 in x 3/4 in x 3/4 in, termasuk dalam kategori Low-Pressure Threaded Pipe Fittings. Fitting ini memiliki konfigurasi Threaded x Threaded x Threaded, Class 125, terbuat dari Cast Iron, dengan Maximum Operating Pressure 175 psi @ -20° hingga 150°F. Produk ini cocok untuk aplikasi perpipaan bertekanan rendah di berbagai sektor industri di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi ANVIL Metal Pipe Tee 1 in x 3/4 in x 3/4 in?

ANVIL Metal Pipe Tee ini memiliki spesifikasi: tipe Threaded x Threaded x Threaded, Class 125, material Cast Iron, Maximum Operating Pressure 175 psi @ -20° hingga 150°F, dengan Manufacturer Part Number 0300037801.

Untuk apa ANVIL Metal Pipe Tee digunakan?

ANVIL Metal Pipe Tee digunakan sebagai sambungan pipa berbentuk T untuk mengalirkan fluida bertekanan rendah. Cocok untuk sistem perpipaan air, udara, atau minyak dengan tekanan maksimal 175 psi pada suhu -20° hingga 150°F.

Di mana beli ANVIL Metal Pipe Tee di Indonesia?

Anda dapat membeli ANVIL Metal Pipe Tee melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan produk sampai ke lokasi Anda.

Bagaimana cara memilih ANVIL Metal Pipe Tee yang tepat?

Pastikan Anda memilih ukuran yang sesuai dengan kebutuhan pipa Anda. ANVIL Metal Pipe Tee ini memiliki ukuran 1 in x 3/4 in x 3/4 in dengan konfigurasi ulir penuh (Threaded x Threaded x Threaded) dan tekanan kerja maksimal 175 psi.

ANVIL Produk

3G Electric memasok ANVIL low-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
ANVIL
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
Medium-pressure threaded pipe union with 1/4 in threaded x threaded connections. Class 150 rating with maximum operating pressure of 300 psi at 150°F. Used to connect two pipes of the same size, allowing quick disconnection for maintenance in steam, water, or gas lines
ANVIL
Medium-pressure threaded pipe union with 1/4 in threaded x threaded connections. Class 150 rating with maximum operating pressure of 300 psi at 150°F. Used to connect two pipes of the same size, allowing quick disconnection for maintenance in steam, water, or gas lines
Threaded x threaded straight reducer pipe fitting, Class 150, rated for 300 psi at 150° F. Used in medium-pressure piping systems for steam, water, or gas lines where a reduction in pipe size is required
ANVIL
Threaded x threaded straight reducer pipe fitting, Class 150, rated for 300 psi at 150° F. Used in medium-pressure piping systems for steam, water, or gas lines where a reduction in pipe size is required
Threaded x threaded 90° reducing elbow for medium-pressure piping systems. Connects 4 in to 3 in pipe at Class 150 rating. Maximum operating pressure 300 psi at 150° F
ANVIL
Threaded x threaded 90° reducing elbow for medium-pressure piping systems. Connects 4 in to 3 in pipe at Class 150 rating. Maximum operating pressure 300 psi at 150° F
This 90° elbow is made of steel with female NPT threaded connections on both ends. It is rated for a maximum operating pressure of 2,000 psi at 150° F. Used to change direction in threaded high-pressure piping systems
ANVIL
This 90° elbow is made of steel with female NPT threaded connections on both ends. It is rated for a maximum operating pressure of 2,000 psi at 150° F. Used to change direction in threaded high-pressure piping systems
This 90° elbow connects two 1/4 in threaded pipes in medium-pressure systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F. Suitable for directional changes in plumbing, HVAC, and industrial fluid or gas lines
ANVIL
This 90° elbow connects two 1/4 in threaded pipes in medium-pressure systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F. Suitable for directional changes in plumbing, HVAC, and industrial fluid or gas lines

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Threaded x threaded straight pipe fitting for low-pressure applications. Connects 1-1/4 in to 1/2 in pipe sizes. Rated Class 125 with maximum operating pressure of 175 psi at 150° F. Suitable for use in industrial plumbing, HVAC, and process piping systems
ANVIL
Threaded x threaded straight pipe fitting for low-pressure applications. Connects 1-1/4 in to 1/2 in pipe sizes. Rated Class 125 with maximum operating pressure of 175 psi at 150° F. Suitable for use in industrial plumbing, HVAC, and process piping systems
Threaded x Threaded straight reducer for low-pressure piping systems. Class 125, rated 175 psi @ 150° F. Connects 2 in to 1 1/4 in pipe. Used in industrial plumbing, HVAC, and process applications
ANVIL
Threaded x Threaded straight reducer for low-pressure piping systems. Class 125, rated 175 psi @ 150° F. Connects 2 in to 1 1/4 in pipe. Used in industrial plumbing, HVAC, and process applications
Threaded x Threaded x Threaded tee for branching or combining flow in low-pressure piping systems. Suitable for water, air, or steam lines in industrial, HVAC, and plumbing applications. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Threaded x Threaded x Threaded tee for branching or combining flow in low-pressure piping systems. Suitable for water, air, or steam lines in industrial, HVAC, and plumbing applications. Maximum operating pressure 175 psi at -20° to 150°F
Threaded x Threaded x Threaded, Class 125, cast iron. Maximum operating pressure 175 psi @ -20° to 150°F. Used to connect three threaded pipes in low-pressure water or air lines
ANVIL
Threaded x Threaded x Threaded, Class 125, cast iron. Maximum operating pressure 175 psi @ -20° to 150°F. Used to connect three threaded pipes in low-pressure water or air lines
Threaded x Threaded 90° elbow for low-pressure piping systems. Rated Class 125 with maximum operating pressure 175 psi at 150° F. Used to change direction in water, air, or steam lines
ANVIL
Threaded x Threaded 90° elbow for low-pressure piping systems. Rated Class 125 with maximum operating pressure 175 psi at 150° F. Used to change direction in water, air, or steam lines
This threaded plug is used to seal open ends in low-pressure piping systems, such as water, air, or steam lines. It is commonly applied in industrial plumbing, HVAC, and process piping to cap unused ports or close pipe ends during maintenance or system modifications. Constructed from malleable iron with NPT threads, it is rated for a maximum operating pressure of 285 psi
ANVIL
This threaded plug is used to seal open ends in low-pressure piping systems, such as water, air, or steam lines. It is commonly applied in industrial plumbing, HVAC, and process piping to cap unused ports or close pipe ends during maintenance or system modifications. Constructed from malleable iron with NPT threads, it is rated for a maximum operating pressure of 285 psi
Threaded x Threaded x Threaded pipe tee with 1 1/4 in x 1 1/4 in x 1/2 in configuration. Class 125 cast iron construction rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
ANVIL
Threaded x Threaded x Threaded pipe tee with 1 1/4 in x 1 1/4 in x 1/2 in configuration. Class 125 cast iron construction rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
Low-pressure threaded pipe tee with reducing branch, cast iron construction, Class 125. Threaded x threaded x threaded connections for use in water, steam, or gas piping systems. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Low-pressure threaded pipe tee with reducing branch, cast iron construction, Class 125. Threaded x threaded x threaded connections for use in water, steam, or gas piping systems. Maximum operating pressure 175 psi at -20° to 150°F