Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Siku Pipa Logam: 1/4 in x 1/4 in, Berulir x Berulir, Kelas 150, 300 psi @ 150° F - Medium-Pressure Threaded Pipe Fittings
ANVILMedium-Pressure Threaded Pipe Fittings

ANVIL Siku Pipa Logam: 1/4 in x 1/4 in, Berulir x Berulir, Kelas 150, 300 psi @ 150° F

Siku pipa logam ANVIL 90° berulir ini adalah fitting pipa berulir kelas 150 yang dirancang untuk aplikasi tekanan sedang. Dengan ukuran 1/4 in x 1/4 in dan tekanan operasi maksimum 300 psi pada suhu 150° F, produk…

SKU 3G-OTH-654516

Merek
ANVIL
Item
Siku Pipa Logam: 1/4 in x 1/4 in, Berulir x Berulir, Kelas 150, 300 psi @ 150° F
Kategori
Medium-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0310015805
Type
Threaded x Threaded, Class 150, 300 psi @ 150° F
Elbow
90°
Maximum Operating Pressure
300 psi @ 150° F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

Siku pipa logam ANVIL 90° berulir ini adalah fitting pipa berulir kelas 150 yang dirancang untuk aplikasi tekanan sedang. Dengan ukuran 1/4 in x 1/4 in dan tekanan operasi maksimum 300 psi pada suhu 150° F, produk ini cocok untuk berbagai sistem perpipaan industri. Sebagai komponen peralatan industri yang andal, siku ini memudahkan perubahan arah aliran dalam instalasi pipa Anda.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa siku pipa ANVIL 1/4 in ini digunakan?

Siku pipa ANVIL 90° ini digunakan untuk mengubah arah aliran dalam sistem perpipaan bertekanan sedang. Dengan spesifikasi Class 150 dan tekanan operasi maksimum 300 psi @ 150° F, produk ini ideal untuk instalasi pipa di berbagai sektor industri.

Apa spesifikasi siku pipa ANVIL 1/4 in x 1/4 in?

Produk ini adalah siku pipa logam ANVIL dengan tipe Threaded x Threaded, sudut 90°, ukuran 1/4 in x 1/4 in, kelas 150, dan tekanan operasi maksimum 300 psi pada suhu 150° F. Nomor komponen pabrikan adalah 0310015805.

Di mana beli siku pipa ANVIL di Indonesia?

Anda dapat membeli siku pipa ANVIL ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima produk dengan mudah.

Bagaimana cara memilih siku pipa berulir yang tepat?

Pilih siku pipa berulir berdasarkan ukuran, kelas tekanan, dan material yang sesuai dengan sistem perpipaan Anda. Untuk aplikasi tekanan sedang, siku ANVIL Class 150 dengan tekanan 300 psi @ 150° F ini adalah pilihan yang tepat untuk sambungan 1/4 in.

ANVIL Produk

3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Threaded x threaded 90° reducing elbow for medium-pressure piping systems. Connects 4 in to 3 in pipe at Class 150 rating. Maximum operating pressure 300 psi at 150° F
ANVIL
Threaded x threaded 90° reducing elbow for medium-pressure piping systems. Connects 4 in to 3 in pipe at Class 150 rating. Maximum operating pressure 300 psi at 150° F
Medium-pressure threaded pipe union with 1/4 in threaded x threaded connections. Class 150 rating with maximum operating pressure of 300 psi at 150°F. Used to connect two pipes of the same size, allowing quick disconnection for maintenance in steam, water, or gas lines
ANVIL
Medium-pressure threaded pipe union with 1/4 in threaded x threaded connections. Class 150 rating with maximum operating pressure of 300 psi at 150°F. Used to connect two pipes of the same size, allowing quick disconnection for maintenance in steam, water, or gas lines
Threaded x threaded straight reducer pipe fitting, Class 150, rated for 300 psi at 150° F. Used in medium-pressure piping systems for steam, water, or gas lines where a reduction in pipe size is required
ANVIL
Threaded x threaded straight reducer pipe fitting, Class 150, rated for 300 psi at 150° F. Used in medium-pressure piping systems for steam, water, or gas lines where a reduction in pipe size is required
This 90° elbow is made of steel with female NPT threaded connections on both ends. It is rated for a maximum operating pressure of 2,000 psi at 150° F. Used to change direction in threaded high-pressure piping systems
ANVIL
This 90° elbow is made of steel with female NPT threaded connections on both ends. It is rated for a maximum operating pressure of 2,000 psi at 150° F. Used to change direction in threaded high-pressure piping systems
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
ANVIL
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
Threaded high-pressure pipe elbow with 3-inch female NPT connections on both ends. Constructed of steel and rated Class 6000. Used to change flow direction in industrial piping systems
ANVIL
Threaded high-pressure pipe elbow with 3-inch female NPT connections on both ends. Constructed of steel and rated Class 6000. Used to change flow direction in industrial piping systems

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
This steel plug seals the end of a threaded pipe in medium-pressure systems up to 285 psi. It features a 1 1/2 in NPT connection and is used to cap lines during maintenance or system isolation
ANVIL
This steel plug seals the end of a threaded pipe in medium-pressure systems up to 285 psi. It features a 1 1/2 in NPT connection and is used to cap lines during maintenance or system isolation
Threaded x threaded x threaded tee fitting, Class 150, rated for 300 psi at 150°F. Used to branch or combine flow in medium-pressure industrial piping systems
ANVIL
Threaded x threaded x threaded tee fitting, Class 150, rated for 300 psi at 150°F. Used to branch or combine flow in medium-pressure industrial piping systems
Threaded x Threaded x Threaded tee for medium-pressure piping systems. Class 150 rated with maximum operating pressure of 300 psi at 150°F. Used to split or combine flow in water, steam, or gas lines
ANVIL
Threaded x Threaded x Threaded tee for medium-pressure piping systems. Class 150 rated with maximum operating pressure of 300 psi at 150°F. Used to split or combine flow in water, steam, or gas lines
Medium-pressure threaded pipe fitting, 45° elbow, 1/2 in x 1/2 in, made of malleable iron. Rated for 300 psi at 150°F. Used in industrial piping systems to change flow direction in steam, water, or air lines
ANVIL
Medium-pressure threaded pipe fitting, 45° elbow, 1/2 in x 1/2 in, made of malleable iron. Rated for 300 psi at 150°F. Used in industrial piping systems to change flow direction in steam, water, or air lines
This 90° elbow fitting connects two pipes of different sizes (1-1/4 in and 3/4 in) with threaded ends. Rated Class 150, it handles a maximum operating pressure of 300 psi at 150°F. Commonly used in medium-pressure steam, water, and gas piping systems to change flow direction
ANVIL
This 90° elbow fitting connects two pipes of different sizes (1-1/4 in and 3/4 in) with threaded ends. Rated Class 150, it handles a maximum operating pressure of 300 psi at 150°F. Commonly used in medium-pressure steam, water, and gas piping systems to change flow direction
Medium-pressure threaded pipe fitting, straight reducer with 2 in x 1 1/2 in threaded ends. Class 150 rated, maximum operating pressure 300 psi at 150°F. Used to connect pipes of different sizes in industrial plumbing, HVAC, and process piping systems
ANVIL
Medium-pressure threaded pipe fitting, straight reducer with 2 in x 1 1/2 in threaded ends. Class 150 rated, maximum operating pressure 300 psi at 150°F. Used to connect pipes of different sizes in industrial plumbing, HVAC, and process piping systems
Medium-pressure threaded pipe fitting for connecting pipes of different sizes. Made of malleable iron, rated for 300 psi at 150°F. Suitable for steam, water, gas, and oil lines in industrial plumbing and HVAC systems
ANVIL
Medium-pressure threaded pipe fitting for connecting pipes of different sizes. Made of malleable iron, rated for 300 psi at 150°F. Suitable for steam, water, gas, and oil lines in industrial plumbing and HVAC systems
Steel threaded pipe straight for connecting two pipes in a straight line in medium-pressure systems. Rated for 300 psi at 150°F with 1/8 in x 1/8 in connections. Suitable for industrial plumbing, HVAC, and pneumatic applications
ANVIL
Steel threaded pipe straight for connecting two pipes in a straight line in medium-pressure systems. Rated for 300 psi at 150°F with 1/8 in x 1/8 in connections. Suitable for industrial plumbing, HVAC, and pneumatic applications