Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Pipa Logam Lurus: 4 in x 1 1/2 in, Berulir x Berulir, Kelas 150, 300 psi @ 150° F - Medium-Pressure Threaded Pipe Fittings
ANVILMedium-Pressure Threaded Pipe Fittings

ANVIL Pipa Logam Lurus: 4 in x 1 1/2 in, Berulir x Berulir, Kelas 150, 300 psi @ 150° F

ANVIL Metal Pipe Straight adalah fitting pipa berulir medium-pressure yang dirancang untuk sistem perpipaan industri. Tipe Threaded x Threaded, Class 150, dengan tekanan operasi maksimum 300 psi pada suhu 150°F…

SKU 3G-OTH-654587

Merek
ANVIL
Item
Pipa Logam Lurus: 4 in x 1 1/2 in, Berulir x Berulir, Kelas 150, 300 psi @ 150° F
Kategori
Medium-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0310093208
Type
Threaded x Threaded, Class 150, 300 psi @ 150° F, Straight
Maximum Operating Pressure
300 psi @ 150° F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ANVIL Metal Pipe Straight adalah fitting pipa berulir medium-pressure yang dirancang untuk sistem perpipaan industri. Tipe Threaded x Threaded, Class 150, dengan tekanan operasi maksimum 300 psi pada suhu 150°F. Fitting lurus ini tersedia dalam ukuran 4 in x 1 1/2 in, cocok untuk aplikasi perpipaan bertekanan di sektor kelapa sawit, semen, dan pengolahan makanan.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi ANVIL Metal Pipe Straight 4 in x 1 1/2 in?

ANVIL Metal Pipe Straight ini memiliki tipe Threaded x Threaded, Class 150, dengan tekanan operasi maksimum 300 psi pada suhu 150°F. Ukuran fitting adalah 4 in x 1 1/2 in, dan nomor part pabrikan adalah 0310093208.

Untuk apa ANVIL Metal Pipe Straight digunakan?

Fitting pipa lurus ANVIL ini digunakan untuk menyambung dua pipa berulir dalam sistem perpipaan bertekanan medium. Cocok untuk aplikasi industri seperti boiler, sistem uap, dan saluran fluida bertekanan hingga 300 psi pada suhu 150°F.

Di mana beli ANVIL Metal Pipe Straight di Indonesia?

Anda dapat membeli ANVIL Metal Pipe Straight melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima fitting pipa ANVIL langsung di lokasi proyek.

Bagaimana cara memilih ANVIL Metal Pipe Straight yang tepat?

Pastikan Anda memilih ukuran yang sesuai dengan kebutuhan sistem perpipaan Anda. ANVIL Metal Pipe Straight ini tersedia dalam ukuran 4 in x 1 1/2 in, Class 150, dengan tekanan maksimum 300 psi pada suhu 150°F. Periksa juga jenis ulir (Threaded x Threaded) agar kompatibel dengan fitting lain.

ANVIL Produk

3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Medium-pressure threaded pipe union with 1/4 in threaded x threaded connections. Class 150 rating with maximum operating pressure of 300 psi at 150°F. Used to connect two pipes of the same size, allowing quick disconnection for maintenance in steam, water, or gas lines
ANVIL
Medium-pressure threaded pipe union with 1/4 in threaded x threaded connections. Class 150 rating with maximum operating pressure of 300 psi at 150°F. Used to connect two pipes of the same size, allowing quick disconnection for maintenance in steam, water, or gas lines
This 90° elbow connects two 1/4 in threaded pipes in medium-pressure systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F. Suitable for directional changes in plumbing, HVAC, and industrial fluid or gas lines
ANVIL
This 90° elbow connects two 1/4 in threaded pipes in medium-pressure systems. Rated Class 150 with a maximum operating pressure of 300 psi at 150°F. Suitable for directional changes in plumbing, HVAC, and industrial fluid or gas lines
Threaded x threaded 90° reducing elbow for medium-pressure piping systems. Connects 4 in to 3 in pipe at Class 150 rating. Maximum operating pressure 300 psi at 150° F
ANVIL
Threaded x threaded 90° reducing elbow for medium-pressure piping systems. Connects 4 in to 3 in pipe at Class 150 rating. Maximum operating pressure 300 psi at 150° F
This low-pressure threaded pipe tee features a 1-inch main run with two 3/4-inch branch outlets, all with female NPT threads. Made of Class 125 cast iron, it is rated for 175 psi at temperatures from -20°F to 150°F. Used to split or combine flow in water, air, or steam piping systems
ANVIL
This low-pressure threaded pipe tee features a 1-inch main run with two 3/4-inch branch outlets, all with female NPT threads. Made of Class 125 cast iron, it is rated for 175 psi at temperatures from -20°F to 150°F. Used to split or combine flow in water, air, or steam piping systems
This 90° elbow is made of steel with female NPT threaded connections on both ends. It is rated for a maximum operating pressure of 2,000 psi at 150° F. Used to change direction in threaded high-pressure piping systems
ANVIL
This 90° elbow is made of steel with female NPT threaded connections on both ends. It is rated for a maximum operating pressure of 2,000 psi at 150° F. Used to change direction in threaded high-pressure piping systems
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
ANVIL
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Reduces from 4-inch to 3-inch size. Rated at 300 psi at 150°F. Made of malleable iron
ANVIL
Medium-pressure threaded pipe fitting for connecting or redirecting piping in industrial systems. Reduces from 4-inch to 3-inch size. Rated at 300 psi at 150°F. Made of malleable iron
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. It is rated for 300 psi at 150°F and has a 3-inch size. Used to change flow direction in piping systems for steam, water, gas, or oil
ANVIL
This 45° elbow is a medium-pressure threaded pipe fitting made of malleable iron. It is rated for 300 psi at 150°F and has a 3-inch size. Used to change flow direction in piping systems for steam, water, gas, or oil
Straight medium-pressure threaded pipe fitting for connecting or extending piping in industrial systems. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Suitable for use in plumbing, HVAC, and process lines
ANVIL
Straight medium-pressure threaded pipe fitting for connecting or extending piping in industrial systems. Made of malleable iron with a maximum operating pressure of 300 psi at 150°F. Suitable for use in plumbing, HVAC, and process lines
Medium-pressure threaded pipe tee with run x run x branch configuration. Rated for 300 psi at 150°F. Used to split or combine fluid flow in piping systems for water, oil, gas, and steam lines
ANVIL
Medium-pressure threaded pipe tee with run x run x branch configuration. Rated for 300 psi at 150°F. Used to split or combine fluid flow in piping systems for water, oil, gas, and steam lines
Threaded x threaded straight pipe fitting for connecting two pipes in line. Class 150 rating, maximum operating pressure 300 psi at 150° F. Suitable for medium-pressure water, oil, or gas lines
ANVIL
Threaded x threaded straight pipe fitting for connecting two pipes in line. Class 150 rating, maximum operating pressure 300 psi at 150° F. Suitable for medium-pressure water, oil, or gas lines
This medium-pressure threaded pipe tee connects three pipes in a T-shaped configuration. It is a Class 150 fitting rated for 300 psi at 150°F, suitable for use in water, air, or steam lines in industrial plumbing and process piping systems
ANVIL
This medium-pressure threaded pipe tee connects three pipes in a T-shaped configuration. It is a Class 150 fitting rated for 300 psi at 150°F, suitable for use in water, air, or steam lines in industrial plumbing and process piping systems
This medium-pressure threaded pipe tee is used to create a branch connection in piping systems. It features a run x run x branch configuration with a maximum operating pressure of 300 psi at 150°F. Size: 1 in x 1/4 in x 1 in. Made in USA
ANVIL
This medium-pressure threaded pipe tee is used to create a branch connection in piping systems. It features a run x run x branch configuration with a maximum operating pressure of 300 psi at 150°F. Size: 1 in x 1/4 in x 1 in. Made in USA
Medium-pressure threaded pipe fitting for connecting pipes of different sizes. Malleable iron construction rated for 300 psi at 150°F. Suitable for steam, water, and gas lines in industrial and commercial piping systems
ANVIL
Medium-pressure threaded pipe fitting for connecting pipes of different sizes. Malleable iron construction rated for 300 psi at 150°F. Suitable for steam, water, and gas lines in industrial and commercial piping systems