Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Salib Pipa Logam: 1 in x 1 in x 3/4 in x 3/4 in, Berulir x Berulir x Berulir x Berulir - Low-Pressure Threaded Pipe Fittings
ANVILLow-Pressure Threaded Pipe Fittings

ANVIL Salib Pipa Logam: 1 in x 1 in x 3/4 in x 3/4 in, Berulir x Berulir x Berulir x Berulir

ANVIL menghadirkan Metal Pipe Cross berukuran 1 in x 1 in x 3/4 in x 3/4 in, fitting pipa berulir (Threaded x Threaded x Threaded x Threaded, Cross) yang dirancang untuk aplikasi tekanan rendah. Dengan Maximum…

SKU 3G-OTH-653999

Merek
ANVIL
Item
Salib Pipa Logam: 1 in x 1 in x 3/4 in x 3/4 in, Berulir x Berulir x Berulir x Berulir
Kategori
Low-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0300111606
Type
Threaded x Threaded x Threaded x Threaded, Cross
Maximum Operating Pressure
175 psi @ -20° to 150°F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ANVIL menghadirkan Metal Pipe Cross berukuran 1 in x 1 in x 3/4 in x 3/4 in, fitting pipa berulir (Threaded x Threaded x Threaded x Threaded, Cross) yang dirancang untuk aplikasi tekanan rendah. Dengan Maximum Operating Pressure 175 psi @ -20° hingga 150°F, produk ini cocok untuk sistem perpipaan industri yang memerlukan percabangan empat arah. Sebagai distributor resmi, 3G Electric menyediakan fitting ANVIL ini untuk kebutuhan peralatan industri di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa fungsi dari Metal Pipe Cross ANVIL ini?

Metal Pipe Cross ANVIL digunakan untuk membuat percabangan empat arah pada sistem perpipaan bertekanan rendah. Fitting ini memiliki sambungan Threaded x Threaded x Threaded x Threaded (Cross) dengan ukuran 1 in x 1 in x 3/4 in x 3/4 in, sehingga memungkinkan distribusi aliran fluida ke beberapa arah secara bersamaan.

Apa spesifikasi tekanan dari fitting pipa ANVIL ini?

Spesifikasi Maximum Operating Pressure dari Metal Pipe Cross ANVIL adalah 175 psi pada rentang suhu -20° hingga 150°F. Pastikan sistem perpipaan Anda beroperasi dalam batas tekanan dan suhu tersebut untuk menjaga keandalan sambungan.

Di mana beli Metal Pipe Cross ANVIL di Indonesia?

Anda dapat membeli Metal Pipe Cross ANVIL (Part Number 0300111606) melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan kepabeanan sehingga Anda dapat menerima fitting pipa ANVIL dengan mudah untuk kebutuhan proyek industri Anda.

Bagaimana cara memilih fitting pipa cross yang tepat?

Pilih fitting pipa cross berdasarkan ukuran pipa yang akan disambung dan tekanan operasional sistem. Untuk aplikasi tekanan rendah, Metal Pipe Cross ANVIL dengan ukuran 1 in x 1 in x 3/4 in x 3/4 in dan Maximum Operating Pressure 175 psi @ -20° hingga 150°F adalah pilihan yang sesuai. Pastikan juga jenis ulir (Threaded) cocok dengan sambungan pipa Anda.

ANVIL Produk

3G Electric memasok ANVIL low-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This low-pressure threaded pipe cross creates a four-way junction in piping systems, connecting pipes at perpendicular angles. It features a 2 1/2 in x 2 in x 1 in x 1 in configuration with all threaded ends. Maximum operating pressure is 175 psi at -20° to 150°F. Suitable for applications such as industrial plumbing, HVAC, and fire protection where branching flow is required
ANVIL
This low-pressure threaded pipe cross creates a four-way junction in piping systems, connecting pipes at perpendicular angles. It features a 2 1/2 in x 2 in x 1 in x 1 in configuration with all threaded ends. Maximum operating pressure is 175 psi at -20° to 150°F. Suitable for applications such as industrial plumbing, HVAC, and fire protection where branching flow is required
Threaded x Threaded x Threaded tee, Class 125 cast iron. Maximum operating pressure 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure piping systems for water, steam, or gas lines
ANVIL
Threaded x Threaded x Threaded tee, Class 125 cast iron. Maximum operating pressure 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure piping systems for water, steam, or gas lines
Threaded x Threaded straight reducer pipe fitting, Class 125, rated for 175 psi at 150°F. Connects 1 1/2 in to 1 1/4 in pipe sizes. Used in low-pressure plumbing, HVAC, and process piping systems for fluid or gas transfer
ANVIL
Threaded x Threaded straight reducer pipe fitting, Class 125, rated for 175 psi at 150°F. Connects 1 1/2 in to 1 1/4 in pipe sizes. Used in low-pressure plumbing, HVAC, and process piping systems for fluid or gas transfer
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
ANVIL
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
Cast iron Class 125 threaded tee with reducing branch. Used to branch or combine flow in low-pressure water, air, or steam piping systems. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Cast iron Class 125 threaded tee with reducing branch. Used to branch or combine flow in low-pressure water, air, or steam piping systems. Maximum operating pressure 175 psi at -20° to 150°F
This straight pipe fitting connects two pipes of different sizes (1-1/4 in and 1/2 in) via NPT threads on both ends. Rated Class 125, it is suitable for low-pressure industrial piping systems with a maximum operating pressure of 175 psi at 150° F
ANVIL
This straight pipe fitting connects two pipes of different sizes (1-1/4 in and 1/2 in) via NPT threads on both ends. Rated Class 125, it is suitable for low-pressure industrial piping systems with a maximum operating pressure of 175 psi at 150° F

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Threaded x threaded straight pipe fitting for low-pressure applications. Connects 1-1/4 in to 1/2 in pipe sizes. Rated Class 125 with maximum operating pressure of 175 psi at 150° F. Suitable for use in industrial plumbing, HVAC, and process piping systems
ANVIL
Threaded x threaded straight pipe fitting for low-pressure applications. Connects 1-1/4 in to 1/2 in pipe sizes. Rated Class 125 with maximum operating pressure of 175 psi at 150° F. Suitable for use in industrial plumbing, HVAC, and process piping systems
Threaded x Threaded straight reducer for low-pressure piping systems. Class 125, rated 175 psi @ 150° F. Connects 2 in to 1 1/4 in pipe. Used in industrial plumbing, HVAC, and process applications
ANVIL
Threaded x Threaded straight reducer for low-pressure piping systems. Class 125, rated 175 psi @ 150° F. Connects 2 in to 1 1/4 in pipe. Used in industrial plumbing, HVAC, and process applications
Threaded x Threaded x Threaded tee for branching or combining flow in low-pressure piping systems. Suitable for water, air, or steam lines in industrial, HVAC, and plumbing applications. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Threaded x Threaded x Threaded tee for branching or combining flow in low-pressure piping systems. Suitable for water, air, or steam lines in industrial, HVAC, and plumbing applications. Maximum operating pressure 175 psi at -20° to 150°F
Threaded x Threaded x Threaded, Class 125, cast iron. Maximum operating pressure 175 psi @ -20° to 150°F. Used to connect three threaded pipes in low-pressure water or air lines
ANVIL
Threaded x Threaded x Threaded, Class 125, cast iron. Maximum operating pressure 175 psi @ -20° to 150°F. Used to connect three threaded pipes in low-pressure water or air lines
Threaded x Threaded 90° elbow for low-pressure piping systems. Rated Class 125 with maximum operating pressure 175 psi at 150° F. Used to change direction in water, air, or steam lines
ANVIL
Threaded x Threaded 90° elbow for low-pressure piping systems. Rated Class 125 with maximum operating pressure 175 psi at 150° F. Used to change direction in water, air, or steam lines
This threaded plug is used to seal open ends in low-pressure piping systems, such as water, air, or steam lines. It is commonly applied in industrial plumbing, HVAC, and process piping to cap unused ports or close pipe ends during maintenance or system modifications. Constructed from malleable iron with NPT threads, it is rated for a maximum operating pressure of 285 psi
ANVIL
This threaded plug is used to seal open ends in low-pressure piping systems, such as water, air, or steam lines. It is commonly applied in industrial plumbing, HVAC, and process piping to cap unused ports or close pipe ends during maintenance or system modifications. Constructed from malleable iron with NPT threads, it is rated for a maximum operating pressure of 285 psi
Threaded x Threaded x Threaded pipe tee with 1 1/4 in x 1 1/4 in x 1/2 in configuration. Class 125 cast iron construction rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
ANVIL
Threaded x Threaded x Threaded pipe tee with 1 1/4 in x 1 1/4 in x 1/2 in configuration. Class 125 cast iron construction rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
Low-pressure threaded pipe tee with reducing branch, cast iron construction, Class 125. Threaded x threaded x threaded connections for use in water, steam, or gas piping systems. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Low-pressure threaded pipe tee with reducing branch, cast iron construction, Class 125. Threaded x threaded x threaded connections for use in water, steam, or gas piping systems. Maximum operating pressure 175 psi at -20° to 150°F