Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
ANVIL Salib Pipa Logam: 2 1/2 in x 2 in x 1 in x 1 in, Berulir x Berulir x Berulir x Berulir - Low-Pressure Threaded Pipe Fittings
ANVILLow-Pressure Threaded Pipe Fittings

ANVIL Salib Pipa Logam: 2 1/2 in x 2 in x 1 in x 1 in, Berulir x Berulir x Berulir x Berulir

ANVIL Metal Pipe Cross adalah fitting pipa ulir berbentuk cross (silang) dengan ukuran 2 1/2 in x 2 in x 1 in x 1 in, dirancang untuk aplikasi perpipaan bertekanan rendah. Fitting ini memiliki tekanan operasi…

SKU 3G-OTH-653964

Merek
ANVIL
Item
Salib Pipa Logam: 2 1/2 in x 2 in x 1 in x 1 in, Berulir x Berulir x Berulir x Berulir
Kategori
Low-Pressure Threaded Pipe Fittings
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

ANVIL
Manufacturer Part Number
0300116001
Type
Threaded x Threaded x Threaded x Threaded, Cross
Maximum Operating Pressure
175 psi @ -20° to 150°F
(DO NOT SEND) Manufacturer Location
Made in USA

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

ANVIL Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

ANVIL Metal Pipe Cross adalah fitting pipa ulir berbentuk cross (silang) dengan ukuran 2 1/2 in x 2 in x 1 in x 1 in, dirancang untuk aplikasi perpipaan bertekanan rendah. Fitting ini memiliki tekanan operasi maksimum 175 psi pada suhu -20° hingga 150°F, cocok untuk sistem perpipaan industri yang memerlukan percabangan empat arah. Sebagai komponen peralatan industri, produk ini tersedia melalui 3G Electric untuk kebutuhan proyek Anda di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi ANVIL Metal Pipe Cross 2 1/2 in x 2 in x 1 in x 1 in?

ANVIL Metal Pipe Cross memiliki tipe ulir (Threaded x Threaded x Threaded x Threaded) dengan nomor part 0300116001. Tekanan operasi maksimum mencapai 175 psi pada rentang suhu -20° hingga 150°F. Fitting ini digunakan untuk percabangan pipa empat arah dalam sistem perpipaan bertekanan rendah.

Untuk apa ANVIL Metal Pipe Cross digunakan?

ANVIL Metal Pipe Cross digunakan sebagai fitting pipa ulir berbentuk cross untuk membuat percabangan empat arah pada sistem perpipaan bertekanan rendah. Produk ini ideal untuk aplikasi industri yang memerlukan distribusi aliran fluida atau gas ke beberapa arah sekaligus.

Di mana beli ANVIL Metal Pipe Cross di Indonesia?

Anda dapat membeli ANVIL Metal Pipe Cross melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai sehingga Anda dapat menerima fitting pipa ulir ini dengan mudah untuk kebutuhan proyek industri Anda.

Bagaimana cara memilih ANVIL Metal Pipe Cross yang tepat?

Pilih ANVIL Metal Pipe Cross berdasarkan ukuran pipa yang dibutuhkan, yaitu 2 1/2 in x 2 in x 1 in x 1 in. Pastikan tekanan operasi sistem Anda tidak melebihi 175 psi dan suhu berada dalam rentang -20° hingga 150°F. Fitting ini cocok untuk sistem perpipaan bertekanan rendah dengan sambungan ulir.

ANVIL Produk

3G Electric memasok ANVIL low-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
ANVIL
Threaded x Threaded x Threaded tee fitting for branching or combining flow in low-pressure piping systems. Cast iron construction with Class 125 rating. Maximum operating pressure 175 psi at -20° to 150°F. Suitable for water, air, and non-corrosive fluids
Cast iron Class 125 threaded tee with reducing branch. Used to branch or combine flow in low-pressure water, air, or steam piping systems. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Cast iron Class 125 threaded tee with reducing branch. Used to branch or combine flow in low-pressure water, air, or steam piping systems. Maximum operating pressure 175 psi at -20° to 150°F
Threaded x Threaded x Threaded, Class 125, cast iron tee fitting. Maximum operating pressure 175 psi @ -20° to 150°F. Used to branch or combine flow in low-pressure water, steam, or gas piping systems
ANVIL
Threaded x Threaded x Threaded, Class 125, cast iron tee fitting. Maximum operating pressure 175 psi @ -20° to 150°F. Used to branch or combine flow in low-pressure water, steam, or gas piping systems
This low-pressure threaded pipe tee features a 1-inch main run with two 3/4-inch branch outlets, all with female NPT threads. Made of Class 125 cast iron, it is rated for 175 psi at temperatures from -20°F to 150°F. Used to split or combine flow in water, air, or steam piping systems
ANVIL
This low-pressure threaded pipe tee features a 1-inch main run with two 3/4-inch branch outlets, all with female NPT threads. Made of Class 125 cast iron, it is rated for 175 psi at temperatures from -20°F to 150°F. Used to split or combine flow in water, air, or steam piping systems
This cast iron pipe tee features three 1/4 in threaded ends for splitting or combining flow in low-pressure piping systems. Rated Class 125 with a maximum operating pressure of 175 psi at -20° to 150°F, it is suitable for water, air, or steam lines in industrial plumbing and HVAC applications
ANVIL
This cast iron pipe tee features three 1/4 in threaded ends for splitting or combining flow in low-pressure piping systems. Rated Class 125 with a maximum operating pressure of 175 psi at -20° to 150°F, it is suitable for water, air, or steam lines in industrial plumbing and HVAC applications
Threaded pipe tee with 1/2 x 1/2 x 3/8 inch connections, Class 125 cast iron construction. Rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
ANVIL
Threaded pipe tee with 1/2 x 1/2 x 3/8 inch connections, Class 125 cast iron construction. Rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems

Lainnya dari ANVIL

Lihat semua ANVIL suku cadang →
Threaded x threaded straight pipe fitting for low-pressure applications. Connects 1-1/4 in to 1/2 in pipe sizes. Rated Class 125 with maximum operating pressure of 175 psi at 150° F. Suitable for use in industrial plumbing, HVAC, and process piping systems
ANVIL
Threaded x threaded straight pipe fitting for low-pressure applications. Connects 1-1/4 in to 1/2 in pipe sizes. Rated Class 125 with maximum operating pressure of 175 psi at 150° F. Suitable for use in industrial plumbing, HVAC, and process piping systems
Threaded x Threaded straight reducer for low-pressure piping systems. Class 125, rated 175 psi @ 150° F. Connects 2 in to 1 1/4 in pipe. Used in industrial plumbing, HVAC, and process applications
ANVIL
Threaded x Threaded straight reducer for low-pressure piping systems. Class 125, rated 175 psi @ 150° F. Connects 2 in to 1 1/4 in pipe. Used in industrial plumbing, HVAC, and process applications
Threaded x Threaded x Threaded tee for branching or combining flow in low-pressure piping systems. Suitable for water, air, or steam lines in industrial, HVAC, and plumbing applications. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Threaded x Threaded x Threaded tee for branching or combining flow in low-pressure piping systems. Suitable for water, air, or steam lines in industrial, HVAC, and plumbing applications. Maximum operating pressure 175 psi at -20° to 150°F
Threaded x Threaded x Threaded, Class 125, cast iron. Maximum operating pressure 175 psi @ -20° to 150°F. Used to connect three threaded pipes in low-pressure water or air lines
ANVIL
Threaded x Threaded x Threaded, Class 125, cast iron. Maximum operating pressure 175 psi @ -20° to 150°F. Used to connect three threaded pipes in low-pressure water or air lines
Threaded x Threaded 90° elbow for low-pressure piping systems. Rated Class 125 with maximum operating pressure 175 psi at 150° F. Used to change direction in water, air, or steam lines
ANVIL
Threaded x Threaded 90° elbow for low-pressure piping systems. Rated Class 125 with maximum operating pressure 175 psi at 150° F. Used to change direction in water, air, or steam lines
This threaded plug is used to seal open ends in low-pressure piping systems, such as water, air, or steam lines. It is commonly applied in industrial plumbing, HVAC, and process piping to cap unused ports or close pipe ends during maintenance or system modifications. Constructed from malleable iron with NPT threads, it is rated for a maximum operating pressure of 285 psi
ANVIL
This threaded plug is used to seal open ends in low-pressure piping systems, such as water, air, or steam lines. It is commonly applied in industrial plumbing, HVAC, and process piping to cap unused ports or close pipe ends during maintenance or system modifications. Constructed from malleable iron with NPT threads, it is rated for a maximum operating pressure of 285 psi
Threaded x Threaded x Threaded pipe tee with 1 1/4 in x 1 1/4 in x 1/2 in configuration. Class 125 cast iron construction rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
ANVIL
Threaded x Threaded x Threaded pipe tee with 1 1/4 in x 1 1/4 in x 1/2 in configuration. Class 125 cast iron construction rated for 175 psi at -20° to 150°F. Used to branch or combine flow in low-pressure water, air, or steam piping systems
Low-pressure threaded pipe tee with reducing branch, cast iron construction, Class 125. Threaded x threaded x threaded connections for use in water, steam, or gas piping systems. Maximum operating pressure 175 psi at -20° to 150°F
ANVIL
Low-pressure threaded pipe tee with reducing branch, cast iron construction, Class 125. Threaded x threaded x threaded connections for use in water, steam, or gas piping systems. Maximum operating pressure 175 psi at -20° to 150°F