ANVIL Metal Pipe Elbow: 90° Elbow, 300 psi @ 150° F, 1 1/2 in x 1 1/4 in
The ANVIL Metal Pipe Elbow is a 90° medium-pressure threaded pipe fitting, available in a 1 1/2 in x 1 1/4 in reducing size, constructed from malleable iron. It is rated for a maximum operating pressure of 300 psi at…
SKU 3G-OTH-462514
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Elbow is a 90° medium-pressure threaded pipe fitting, available in a 1 1/2 in x 1 1/4 in reducing size, constructed from malleable iron. It is rated for a maximum operating pressure of 300 psi at 150° F (MPN 0311019806).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Elbow used for?
The ANVIL Metal Pipe Elbow is used to change the direction of piping in medium-pressure systems, such as steam, water, or gas lines. Its 90° design and reducing size (1 1/2 in x 1 1/4 in) allow connection of different pipe diameters in industrial plants, commercial buildings, and HVAC applications.
What are the specifications of the ANVIL Metal Pipe Elbow?
The ANVIL Metal Pipe Elbow is a 90° reducing fitting with a 1 1/2 in x 1 1/4 in size, made from malleable iron. It has a maximum operating pressure of 300 psi at 150 °F. The manufacturer part number is 0311019806. It is a medium-pressure threaded pipe fitting suitable for industrial piping systems.
Where to buy the ANVIL Metal Pipe Elbow worldwide?
3G Electric supplies the ANVIL Metal Pipe Elbow (MPN 0311019806) to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this malleable iron 90° reducing elbow.
How to install the ANVIL Metal Pipe Elbow?
Install the ANVIL Metal Pipe Elbow by applying thread sealant to the male pipe threads and hand-tightening the fitting. Use two wrenches to avoid over-torquing, which can damage the malleable iron. Ensure the system is depressurized before installation. Follow standard piping practices for medium-pressure threaded fittings.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
