ANVIL Cap: Cap, 300 psi @ 150° F, 2 1/2 in, NPT Threaded, Malleable Iron
The ANVIL Cap is a medium-pressure threaded pipe fitting, type 300 psi @ 150° F, 2 1/2 in, NPT threaded, made of malleable iron and manufactured in the USA (MPN 0319900767). Its maximum operating pressure is 300 psi…
SKU 3G-OTH-462531
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is a medium-pressure threaded pipe fitting, type 300 psi @ 150° F, 2 1/2 in, NPT threaded, made of malleable iron and manufactured in the USA (MPN 0319900767). Its maximum operating pressure is 300 psi @ 150° F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Cap used for?
The ANVIL Cap seals the end of a 2 1/2 in NPT threaded pipe in medium-pressure systems up to 300 psi @ 150 °F. It is commonly used in plumbing, HVAC, and industrial piping to close off lines for testing, maintenance, or future connections.
What are the specifications of the ANVIL Cap?
The ANVIL Cap is a 2 1/2 in NPT threaded fitting made of malleable iron, rated for 300 psi @ 150 °F maximum operating pressure. It is manufactured in the USA under MPN 0319900767. This medium-pressure pipe fitting is suitable for industrial and commercial applications.
Where to buy the ANVIL Cap worldwide?
3G Electric supplies the ANVIL Cap (MPN 0319900767) worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this 2 1/2 in NPT threaded malleable iron cap.
How to install the ANVIL Cap?
Apply pipe thread sealant or PTFE tape to the male NPT threads. Hand-tighten the ANVIL Cap onto the pipe end, then use a wrench for an additional 1–2 turns. Do not overtighten, as malleable iron can crack. Verify the seal at the rated 300 psi @ 150 °F before service.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
