ANVIL Cap: Cap, 300 psi @ 150° F, 5 in, NPT Threaded, Malleable Iron
The ANVIL Cap is a medium-pressure threaded pipe fitting, type Cap, with a 5-inch NPT threaded connection in malleable iron. It is rated for a maximum operating pressure of 300 psi at 150° F and is manufactured in…
SKU 3G-OTH-462532
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is a medium-pressure threaded pipe fitting, type Cap, with a 5-inch NPT threaded connection in malleable iron. It is rated for a maximum operating pressure of 300 psi at 150° F and is manufactured in the USA (MPN 0319901088).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Cap used for?
The ANVIL Cap is a medium-pressure threaded pipe fitting used to seal the end of a 5-inch NPT pipe system. It is commonly applied in industrial plumbing, HVAC, and process piping where a durable, leak-proof closure is needed at pressures up to 300 psi at 150° F.
What are the specifications of the ANVIL Cap?
The ANVIL Cap (MPN 0319901088) is a 5-inch NPT threaded fitting made of malleable iron. It has a maximum operating pressure of 300 psi at 150° F and is manufactured in the USA. This cap is designed for medium-pressure pipe systems requiring a reliable end seal.
Where to buy the ANVIL Cap worldwide?
3G Electric supplies the ANVIL Cap to customers worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver this genuine ANVIL fitting to your location, ensuring compliance with international shipping requirements.
How to install the ANVIL Cap?
To install the ANVIL Cap, apply pipe thread sealant to the male NPT threads and hand-tighten the cap onto the pipe. Use a pipe wrench for final tightening, but avoid over-torquing to prevent damage to the malleable iron. Ensure the pipe end is clean and free of debris before installation.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
