ANVIL Cap: Cap, Steel, Class 3000, 9,000 psi, 1 in
The ANVIL Cap is an extreme-pressure zinc-galvanized steel pipe fitting, Class 3000, rated for 9,000 psi, with a 1 in NPT threaded connection (MPN 0361502859). It does not include pre-applied thread sealant.
SKU 3G-OTH-459211
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is an extreme-pressure zinc-galvanized steel pipe fitting, Class 3000, rated for 9,000 psi, with a 1 in NPT threaded connection (MPN 0361502859). It does not include pre-applied thread sealant.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Cap used for?
The ANVIL Cap seals the end of a 1-inch NPT threaded pipe in high-pressure systems up to 9,000 psi. It is commonly used in industrial piping for oil and gas, chemical processing, and hydraulic applications where a Class 3000 zinc-galvanized steel fitting is required.
What are the specifications of the ANVIL Cap?
The ANVIL Cap is a Class 3000 steel pipe fitting rated for 9,000 psi. It has a 1-inch NPT threaded connection and is made of zinc-galvanized steel. The manufacturer part number is 0361502859. It does not include pre-applied thread sealant, so sealant must be applied during installation.
Where to buy the ANVIL Cap worldwide?
3G Electric supplies the ANVIL Cap (MPN 0361502859) to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Class 3000 zinc-galvanized steel pipe fitting.
How to install the ANVIL Cap?
To install the ANVIL Cap, clean the male NPT threads on the pipe and apply a compatible thread sealant (not included). Hand-tighten the cap, then use a wrench for final tightening to the recommended torque. Avoid overtightening to prevent thread damage. Always follow standard pipe-fitting best practices.
ANVIL Produk
3G Electric memasok ANVIL extreme-pressure zinc-galvanized steel pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
