APPROVED VENDOR Concrete Anchor Screw: 1 1/2 in Overall Lg, 5/32 in Dia, Steel, Zinc Yellow
The APPROVED VENDOR Concrete Anchor Screw (MPN 08112PS) is a 1 1/2 in overall length, 5/32 in diameter flat-head screw anchor. It features a pointed tip, zinc yellow finish, and is removable. Supplied in a 100-pack…
SKU 3G-OTH-540861
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Concrete Anchor Screw (MPN 08112PS) is a 1 1/2 in overall length, 5/32 in diameter flat-head screw anchor. It features a pointed tip, zinc yellow finish, and is removable. Supplied in a 100-pack, this steel anchor is not graded and is designed for inch-system applications.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR Concrete Anchor Screw 08112PS used for?
This flat-head concrete screw anchor is used for fastening fixtures, brackets, or equipment to concrete, brick, or block in industrial and commercial settings. Its pointed tip and removable design make it suitable for temporary or permanent installations where inch-system fasteners are required.
What are the specifications of the APPROVED VENDOR Concrete Anchor Screw 08112PS?
The APPROVED VENDOR Concrete Anchor Screw (MPN 08112PS) has a 5/32 in diameter and 1 1/2 in overall length. It features a zinc yellow finish, pointed tip, and is removable. Supplied in a 100-pack, this steel anchor is not graded and uses inch-system measurement.
Where to buy APPROVED VENDOR Concrete Anchor Screw 08112PS worldwide?
3G Electric supplies the APPROVED VENDOR Concrete Anchor Screw 08112PS to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this 100-pack of zinc yellow steel anchors.
How to install the APPROVED VENDOR Concrete Anchor Screw 08112PS?
Drill a pilot hole into concrete using a carbide-tipped bit matching the 5/32 in diameter. Clean the hole of dust, then drive the anchor screw with a screwdriver or impact driver until the flat head is flush. The pointed tip aids alignment, and the screw is removable for repositioning.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR flat-head screw anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
